Ranger Band Carry - DIY Minimalist Tool Retention
-
The following are the finer pointers for making and using the 'ranger band carry':
- More robust design
- Details on a good fit
- Other suggestions
1) More Robust design
After a week of using the original, there is no sign of tearing apart, but fearing it might happen in the future, I rounded up all the perpendicular cut points for wear-and-tear prevention:



The last picture shown the difference between the new and original design.(Top: original; Bottom: new)2) Details on a good fit
I found how well this 'sheath' work will largely depend on how you cut it and what kind of inner tube you are using. For myself, I actually order a Avenir inner tube 26 x 1.90-2.125 from Amazon(original it wasn't for this project, but it turns out well ;) ):

(pix borrowed on the net)
The inner tube should fit onto the belt very loosely, if it is already 'gripping' onto your belt, you'd probably have a hard time to stretch it over to cover the tool.If the band diameter is too narrow or the 'width' of the window you cut on the tube is too narrow, it might clam onto the tool a bit too tight and make difficult to get the tool in and out. I find a good compromise is about 1 inch of rubber covering the tool at each end, making it easy and secure enough to use for a few times a day.
For smaller MT or SAK trekker/GAK, I put two ranger belts(same diameter) onto where the rubber gripping onto MT at each side. Those two belts will constrict the diameter of the sheath and make it grip tighter onto the tool.
3) Other suggestion
-Like any other sheath, this works great especially if you are going outdoor and will get sweaty wet. I have seen many knife users complaining their tools get rusty in the past, when the tools were kept in sweaty pockets.
-Like your belt-attached cell phone or side arm, it might be advisable to move the tool so it is not affecting how your seat belt function or make it more easy to retrieve when you need it for emergency.
-For backpacking, this 'sheath' could be transferred onto your shoulder strap/belt strap easily, and move back onto your belt when you arrive camp.
-
Got home and took two more pix, for the smaller MT or SAK trekker/GAK, the two additional ranger bands add-on(I can't edit the previous post, sorry for the extra post)


-
Yeah, that internal radius on the cut-out section makes sense to me.

-
Wow this is a cool idea

-
I would imagine you could use similar made out of a road bike tube for smaller tools, like 91mm Vic

-
Hey, guys.
I just realize I have forgotten to put up the video link onto this thread. At the end of video, I kinda demo how the tool/knife is being put in and out of the sheath.
Ranger Band Carry DIY Minimalistic sheath for Multitools and Knives
Right now, there is something even more exciting being cooked up...it should be fun. :D
-
@Aleph78 said:
I would imagine you could use similar made out of a road bike tube for smaller tools, like 91mm Vic
Totally, and if you use a narrower tube, it is possible to use it to carry something round and smaller, such as a Minimag AA. But just in case you want to use the same size for everything, the last two pictures do shown a way to do it. :D
-
Nice video comis
I used a road bike tube, which is smaller in diameter, and it works great for smaller tools. -
Just bringing this one back to life.

-
I wonder how Comis is? he's not been around for a couple of years

-
Thanks for bumping this up guys.... that's a clever idea

-
Posting so I can easily find this later. This is a very interesting idea.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login