Paul Chen Multi Tasker
-
@ReamerPunch said:

I hope the quality you experienced with the first continues.
I was sad when I returned mine. I liked the shears.Thank you much, RP! It is coming from a different seller, so I am not so optimistic. You (along with other Chen detractors) are usually spot on about stuff. I feel lucky having gotten the first one that was good.
Here's hoping for the best.
I am looking forward to a comparison thread with the Bear & Sons Bird Shears/Toolzall Pro. :)
-
The build quality on it I think is actually pretty good. The pliers looks like the designer forgot to add them to the tool, then just slapped them on the side!! :D. The shears are the best part, and I like the removable file. My blade was a bit dull when I got it, but have sharpened it a bit. The saw is also pretty sharp, but the smaller things like the can opener, are a bit hard to open. The main issue with it for me is the body of the tool digs into my hands when I squeeze it closed using the shears.
-
I returned this before starting my can opener thread. Now I am left wondering if its can opener works or not.

-
@mikekoz said:
The build quality on it I think is actually pretty good. The pliers looks like the designer forgot to add them to the tool, then just slapped them on the side!! :D. The shears are the best part, and I like the removable file. My blade was a bit dull when I got it, but have sharpened it a bit. The saw is also pretty sharp, but the smaller things like the can opener, are a bit hard to open. The main issue with it for me is the body of the tool digs into my hands when I squeeze it closed using the shears.Indeed. The removal of the pliezers would make the tool much better.
@ReamerPunch said:
I returned this before starting my can opener thread. Now I am left wondering if its can opener works or not.
If you'll remind me, I can try the opener out at some point when the second one arrives. :)
It won't be like doing it yourself, but I can show the cut quality and discuss the operating ergonomics. -
One more thing. Until I read this thread, I was not aware of how far back this model goes. I thought it was relatively new!!
-
My second Chen Multitasker arrived. It is consistent and almost identical to the first one I received. The only difference I can detect is the second one I received(different seller mind you) had zero play in the pliezers. The first one had a tiny bit of play in the pliezers.
I'll be carrying it with me tomorrow to try it out. :)
Sorry about the dark photos. :ahhh



-
After using the Multitasker for a bit, I have one serious conplaint about them.
It started with my father wanting to check it out, but he doesn't know much about MTs and with the scissor head deployed, he thought he could close it, for some reason I can't think of, by roughly spreading the handle apart.
Well, I heard something make a faint "crack" noise. It seems to be O.K, but it wasn't deploying properly. I removed the scissor head and looked at the engagement mechanisms closely. The metal scissor blades attach, at the base inside, to plastic slider spacers. He had broken one of the the internal slider spacers. I found the crack and used PVC cement on it and it is fine. But, why? That is like having a tow chain with a single chandelier chain-link in the center.
The plastic spacers have two screws that mount it to the scissor blades by threading it into the plastic spacer. And two screws go into the outer slide button cover, and they are threaded into the plastic spacer as well. A true weak-link. I will probably make some metal spacers at some point, but that is just crazy that they did that to start with. Those plastic spacers take a lot of force with the spring mechanism and they need to be metal.
I know the plastic slider spacers make it more quiet to deploy, but they could have made them out of metal and had the screws just use a piece of plastic as a washer to keep it quiet.I am disappointed with that, as it isn't something everyone can remedy.
I'll take a photo of the plastic thing in a minute and post it. -
Here are two photos showing the metal scissor head with plastic structural spacers.

And you'll have to use PVC glue on it. SuperGlue won't work.


-
@gerleatherberman said:
Here are two photos showing the metal scissor head with plastic structural spacers.
And you'll have to use PVC glue on it. SuperGlue won't work.
do I know...

/topic/78020

-
Many thanks, TP! I had forgotten you had a similar issue. When I make some metal internal spacers, I will be copying your slide modification setup. Thank you. :) What you did is what they should have done at the factory. :o

-
@gerleatherberman said:
Here are two photos showing the metal scissor head with plastic structural spacers.
And you'll have to use PVC glue on it. SuperGlue won't work.
The square tip of that part looks like the thing that was broken on my first MT. Being plastic explains it, and I now have very little confidence that this tool would hold up to hard or long term use. ???

-

If I decide to make metal spacer replacements, I'll make a thread on doing it. They have such a cool tool with the Chen. To cheap out on structural spacers is insane. If they want to save money, nix the pliers and give us some steel spacers. :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login