Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE NOTIFICATIONS 0 MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

First mod done. I present...

Scheduled Pinned Locked Moved The Mod Squad
44 Posts 1 Posters 9.7k Views
  1. Home
  2. Tool Talk
  3. The Mod Squad
  4. First mod done. I present...
First mod done. I present...
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Mr. Whippy Offline
    Mr. Whippy
    Posts: 12,208
    Mr. Whippy Offline
    Mr. Whippy
    wrote on last edited by
    Quote Reply

      The Ice Climber.

      Here it is next to a 91mm Tinker

      The tool list:
      Small blade
      Metal file and metal saw
      Bit driver

      It turns out that the file is narrower than the main blade by approximately the width of a standard liner. Because of this, I was able to pair it with the small blade by offsetting the spacers of the two tools, thereby saving one layer.



      The scales are from an old Aluminum Land Rover plate (which I happened to have in the scrap pile.)

      I'm gonna tie a short cord to the keyring and clip it to my harness with a carabiner. This is designed to be a harness tool. It has the three most often needed tools on it, with the least weight possible (I think).

      It turns out that older main blade springs are more arced than the newer main blade springs and actually work better, giving the file and small blade better snap than the newer spring.

      1 Reply Last reply
      • Poncho65 Offline
        Poncho65
        Global Moderators
        Posts: 88,523
        Poncho65 Offline
        Poncho65
        Global Moderators
        wrote on last edited by
        #1 Quote Reply

          :o Nice looking mod Mr. B w :tu: really looks like it would be very useful as well :cheers:

          1 Reply Last reply
          • Poncho65 Offline
            Poncho65
            Global Moderators
            Posts: 88,523
            Poncho65 Offline
            Poncho65
            Global Moderators
            wrote on last edited by
            #2 Quote Reply

              Owe and I love the scales nice touch :D

              1 Reply Last reply
              • Mike, Lord of the Spammers! Offline
                Mike, Lord of the Spammers!
                Posts: 42,975
                Mike, Lord of the Spammers! Offline
                Mike, Lord of the Spammers!
                wrote on last edited by
                #3 Quote Reply

                  Nice one mate :tu:

                  1 Reply Last reply
                  • Gareth Offline
                    Gareth
                    Admin Team
                    Posts: 37,725
                    Gareth Offline
                    Gareth
                    Admin Team
                    wrote on last edited by
                    #4 Quote Reply

                      Excellent mate. Good job on getting the file and small blade to sit together. :tu:

                      1 Reply Last reply
                      • Benner Offline
                        Benner
                        Posts: 28,081
                        Benner Offline
                        Benner
                        wrote on last edited by
                        #5 Quote Reply

                          Nice one! :)

                          1 Reply Last reply
                          • J-sews Offline
                            J-sews
                            Admin Team
                            Posts: 23,224
                            J-sews Offline
                            J-sews
                            Admin Team
                            wrote on last edited by
                            #6 Quote Reply

                              That's pretty amazing how the LAND and ROVER fit just perfectly within the profile of the scales. :) Good show sir! :tu:

                              1 Reply Last reply
                              • Sean Offline
                                Sean
                                Posts: 3,274
                                Sean Offline
                                Sean
                                wrote on last edited by
                                #7 Quote Reply

                                  Absolutely a fine piece! A really nice keepsake and hopefully a very functional, useable tool for you as well. I would be proud as you must be. Unfortunately I don't think I have the skill to make my own tool. Well done.

                                  sean

                                  1 Reply Last reply
                                  • Neil Offline
                                    Neil
                                    Posts: 15,287
                                    Neil Offline
                                    Neil
                                    wrote on last edited by
                                    #8 Quote Reply

                                      Love the scales :D

                                      What have you got on the back of the blade layer?

                                      Neil

                                      1 Reply Last reply
                                      • DaveK Offline
                                        DaveK
                                        Posts: 13,379
                                        DaveK Offline
                                        DaveK
                                        wrote on last edited by
                                        #9 Quote Reply

                                          What a great mod. I love the scales!

                                          1 Reply Last reply
                                          • Mr. Whippy Offline
                                            Mr. Whippy
                                            Posts: 12,208
                                            Mr. Whippy Offline
                                            Mr. Whippy
                                            wrote on last edited by
                                            #10 Quote Reply

                                              @NKB said:
                                              Love the scales :D

                                              What have you got on the back of the blade layer?

                                              Neil

                                              I left the back open--no tool. I drilled the hole for the keyring into that space. The blade layer seems to work well without the back tool, so I left it out.

                                              1 Reply Last reply
                                              • Don Pablo Offline
                                                Don Pablo
                                                Posts: 15,329
                                                Don Pablo Offline
                                                Don Pablo
                                                wrote on last edited by
                                                #11 Quote Reply

                                                  Bumped and bookmarked.:hatsoff:
                                                  Even though the pics are gone, it's great to know that you can pair the file(and presumably the woodsaw? :think: ) with the combo tool, or small blade, or inline awl. :climber:

                                                  1 Reply Last reply
                                                  • Don Pablo Offline
                                                    Don Pablo
                                                    Posts: 15,329
                                                    Don Pablo Offline
                                                    Don Pablo
                                                    wrote on last edited by
                                                    #12 Quote Reply

                                                      Hmm, is the wood saw the same as the metal file, in thickness at the tip and tang?
                                                      I want to do this mod with the wood saw in place of the metal file.

                                                      1 Reply Last reply
                                                      • King_Gorilla Offline
                                                        King_Gorilla
                                                        Posts: 659
                                                        King_Gorilla Offline
                                                        King_Gorilla
                                                        wrote on last edited by
                                                        #13 Quote Reply

                                                          :'( cant see the pictures :ahhh

                                                          1 Reply Last reply
                                                          • Don Pablo Offline
                                                            Don Pablo
                                                            Posts: 15,329
                                                            Don Pablo Offline
                                                            Don Pablo
                                                            wrote on last edited by
                                                            #14 Quote Reply

                                                              Photobucket ate them. :facepalm:

                                                              I'll try this out myself in a few weeks though, and will post pictures. :cheers:

                                                              1 Reply Last reply
                                                              • Don Pablo Offline
                                                                Don Pablo
                                                                Posts: 15,329
                                                                Don Pablo Offline
                                                                Don Pablo
                                                                wrote on last edited by
                                                                #15 Quote Reply

                                                                  Ok, I've tried it a few ways.
                                                                  First off, keep in mind that the wood saw has lots of big teeth that could catch on a tool or liner if it doesn't have enough space. So what doesn't work well for the saw may work with the metal file. Anyone with a metal file care to experiment and post pics? :pok: ;)
                                                                  Second, I put the Inline Phillips/Mag layer beside the corkscrew layer. Because the inline phillips head sticks out a little bit to the sides, over the liners, its basically a worst case scenario for putting the wood saw beside. If a wood saw configuration works with the inline phillips beside, it should work with anything else. :tu:
                                                                  Third, if you see/think of a configuration I missed, tell me! :cheers:
                                                                  Fourth, nevermind how high the saw tip is. I'm not going to grind at the spacers until I've got something that works well. ;)

                                                                  These are ranked from worst to best, in my opinion.

                                                                  Spoiler:
                                                                  First up, is putting the small blade and spacer in the place of the main blade, with the saw and a spacer where the small blade normally goes.

                                                                  Bad, because the small blade nick is inaccessible. :facepalm:
                                                                  You'll need a double liner between the corkscrew layer and mag layer to stop the saw catching the phillips.
                                                                  Also an old style liner without the stamped indent to get the small blade to fit.
                                                                  Also, the spacer by the saw is too thick, It needs to be 0.6mm or so, and its 0.9-1mm. :-\

                                                                  Spoiler:
                                                                  Next is the small blade and spacer in its usual place, with wood saw in place of main blade.

                                                                  Not very good, because the saw will catch on the small blade unless you guide it in. But has potential.
                                                                  You'll need a double liner between the corkscrew layer and mag layer to stop the saw catching the phillips, also one liner and the small blade spacer will have to be shaped to provide a proper rest for the saw tip.
                                                                  Also, the saw spacer here in this case is too thick. Its about 0.4mm thick, and needs to be 0.2mm thick. That can be achieved by sanding. :cheers:
                                                                  If you used the metal saw, you might have less/no problems with teeth catching the small blade. Needs more investigation by someone with a metal saw. :cheers:

                                                                  1 Reply Last reply
                                                                  • hiraethus Offline
                                                                    hiraethus
                                                                    Admin Team
                                                                    Posts: 6,969
                                                                    hiraethus Offline
                                                                    hiraethus
                                                                    Admin Team
                                                                    wrote on last edited by
                                                                    #16 Quote Reply

                                                                      @King_Gorilla said:
                                                                      :'( cant see the pictures :ahhh

                                                                      Right click, select open image in new tab (or whatever). Photosmurfet page for the image opens.

                                                                      1 Reply Last reply
                                                                      • hiraethus Offline
                                                                        hiraethus
                                                                        Admin Team
                                                                        Posts: 6,969
                                                                        hiraethus Offline
                                                                        hiraethus
                                                                        Admin Team
                                                                        wrote on last edited by
                                                                        #17 Quote Reply

                                                                          @Pablo O'Brien said:
                                                                          Ok, I've tried it a few ways.
                                                                          First off, keep in mind that the wood saw has lots of big teeth that could catch on a tool or liner if it doesn't have enough space. So what doesn't work well for the saw may work with the metal file. Anyone with a metal file care to experiment and post pics? :pok: ;)
                                                                          Second, I put the Inline Phillips/Mag layer beside the corkscrew layer. Because the inline phillips head sticks out a little bit to the sides, over the liners, its basically a worst case scenario for putting the wood saw beside. If a wood saw configuration works with the inline phillips beside, it should work with anything else. :tu:
                                                                          Third, if you see/think of a configuration I missed, tell me! :cheers:
                                                                          Fourth, nevermind how high the saw tip is. I'm not going to grind at the spacers until I've got something that works well. ;)

                                                                          These are ranked from worst to best, in my opinion.

                                                                          Spoiler:
                                                                          First up, is putting the small blade and spacer in the place of the main blade, with the saw and a spacer where the small blade normally goes.

                                                                          Bad, because the small blade nick is inaccessible. :facepalm:
                                                                          You'll need a double liner between the corkscrew layer and mag layer to stop the saw catching the phillips.
                                                                          Also an old style liner without the stamped indent to get the small blade to fit.
                                                                          Also, the spacer by the saw is too thick, It needs to be 0.6mm or so, and its 0.9-1mm. :-\

                                                                          Spoiler:
                                                                          Next is the small blade and spacer in its usual place, with wood saw in place of main blade.

                                                                          Not very good, because the saw will catch on the small blade unless you guide it in. But has potential.
                                                                          You'll need a double liner between the corkscrew layer and mag layer to stop the saw catching the phillips, also one liner and the small blade spacer will have to be shaped to provide a proper rest for the saw tip.
                                                                          Also, the saw spacer here in this case is too thick. Its about 0.4mm thick, and needs to be 0.2mm thick. That can be achieved by sanding. :cheers:
                                                                          If you used the metal saw, you might have less/no problems with teeth catching the small blade. Needs more investigation by someone with a metal saw. :cheers:

                                                                          Excellent work. :tu: I've been thinking about doing this for a while now (with the metal file) but never got round to it. Definitely worth a try.

                                                                          1 Reply Last reply
                                                                          • Don Pablo Offline
                                                                            Don Pablo
                                                                            Posts: 15,329
                                                                            Don Pablo Offline
                                                                            Don Pablo
                                                                            wrote on last edited by Don Pablo
                                                                            #18 Quote Reply

                                                                              Overall, when it comes to putting the wood saw in the corkscrew layer, I'd rather ditch the small blade and take up the extra space with washers. :think:

                                                                              Like this:

                                                                              Spoiler:

                                                                              The saw spacer is too thick. Its 0.9-1mm, and needs to be 0.6mm

                                                                              Or like this:

                                                                              Spoiler:

                                                                              The tweezer/mag end needs an additional 0.4mm spacer for everything to fit right.
                                                                              And the saw spacer needs to be sanded down to half the thickness.

                                                                              The latter is my favorite, and its basically the same idea as what Jaya_Man did, only with small blade spacers instead of a rest made from a scissor spring:
                                                                              </topic/68332

                                                                              1 Reply Last reply
                                                                              • tommywp Offline
                                                                                tommywp
                                                                                Posts: 506
                                                                                tommywp Offline
                                                                                tommywp
                                                                                wrote on last edited by
                                                                                #19 Quote Reply

                                                                                  Nice try Pablo....would have been sweet to get the small blade on there.

                                                                                  Big fan of your recent posts about mod attempts with with all the pics taken along the way. Thinking about attempt my first mod and they're definitely making me feel like I have a better grasp going in.

                                                                                  :tu:

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 3
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. The Mod Squad
                                                                                  4. First mod done. I present...
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0