Appreciating the boxcutter/utility knife
-
Here is the EAB I have had for the last few years at work


-
Is the EAB atleast tolerable when doing heavy cutting or just lots of it?
I might pick one up soon, just curios if the handle is sufficient

-
@CallsignBadger said:
Is the EAB atleast tolerable when doing heavy cutting or just lots of it?I might pick one up soon, just curios if the handle is sufficient

I've cut double wall cardboard, blister packs and used it to trim a hole in dry wall.
If I had several boxes to do at a sitting or was hanging dry wall a bigger handle would really help. -
I have used it for all kinds of cutting and been as satisfied with it as a regular utility blade knife
I have cut heavy gauge copper flashing and aluminum flashing with it, it has opened many boxes and cut plenty of cardboard with it, cut plastic banding that holds brick cubes together and never had any issue
my other one did get a little wobble in the handle but that was after 5 years of harder use than what this one has had
and the guy that has it still uses now 
-
@smiller43147 said:
Here's a true box cutter (as opposed to the utility knives displayed here) that I used on a summer job 40 years ago in a super market.This is what I tend to think of when I hear "box cutter".

-
In that case, an EAB might be in my pocket next week

-
As with most types of edged tools,the lowly box cutter has also come into my accumulation in many designs.Some are designed for multiple uses such as scraping. It wasn't until many years after I started using a standard box cutter did I realize that in most of them you can take out the blade and turn it 90 degrees to use as a scraper.
The only down side I see to replaceable blade utility knives is that most of them use blades that will only fit that particular knife.Many of the early ones used single edge razor blades of the standard type. There were also many types of single edge razor blades when safety razors started to replace straight razors but that is another story......
So without further ado I will post up a few of mine and try to give info about them.#1 Armstrong Notched Blade Knife.Cast iron housing.Still looking for extra blades.
#2 Box cutter promotional item from Swift's Cleansers.Uses a single edge razor blade.
#3 Conrad box cutter uses a single edge razor blade.Has a ruler built in to the top edge.
#4 A modern Craftsman folding utility knife with wood handles and highly polished with removeable blade guard.
#3

-
Page two:
#1 A pair of Crescent utility knives.Top one slides in either direction and has two different blades.
#2 Not sure what this one is used for with the replaceable small blade.Marked Dan C. Laub Minneapolis Minnesota
#3 Garvey Fast-Cut uses specialized blades.
#4 A group of utility knives/cigar cutters.The RazCut Ripper uses a standard single edge blade.The Gillette models use their special Valet blade.The bottom one is a sliding blade.



-
Those all look so cool, Ray 8) I especially
the Gilette ones though

-
Page three:
#1 A left handed box cutter!
#2 & 3 A Hyde scraper/cutter open and closed.
#4 A modern Husky pocket/utility knife. -
Page four:
#1 Kutto utility knife.
#2 Lewis utility knife with a spring loaded fold down guard.
#3 Old cast iron model stamped Made in USA. Looks like a Stanley.
#4 A group of small size utility knives. -
Page five:
#1 An unusual one marked only Pat. Apl'd. Body is cast iron and holds the blade inside. To use;slide the case open and insert blade into slot;close cover locks blade in position. -
Page six:
#1Quick-Blade folding knife.Notch on bottom of blade is for cutting tape.
#2 Red Devil Jak Nife Can be used as a knife or a scraper and folds up for safety.
#3 A couple of early cast iron Stanley knives(model 1299)
#4 A Uni-Tool multiblade knife.


-
Last ones for now:
#1 A group of Gillette utility knives with extra blades.
#2 A group of small utility knives.
#3 A pair of Stanley 10-049 folding utility knives.The blade release is effected by sliding the plastic tab on the back to the rear.
#4 A Stanley 10-059 funny folder knife.



-
Cool collection

-
:D

-
Always had a thing for the Olfa cutters too!
Back when I installed Tint and Security Film these were all we used.
Sent from my iPhone,dont expect too much[emoji85]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
