Bustin' out the traditionals, a 30-day challenge
-
Sounds interesting. I've been trying to save up for a GEC Calf Pen (cheapest I can buy locally), and may do it with just that once I get it. I did the original (though I didn't request a badge) and I did one for the badge in Feb. Sticking to one traditional for 30 days will be a real challenge. I change just about daily.
-
So any of the Buck 110/112 variants are good, or just the Classic?
Sent from my iPhone using Tapatalk
-
Any of the classic variants. Not the new ones with thumb studs or pocket clips.
-
@zrxoa1 said:
So any of the Buck 110/112 variants are good, or just the Classic?At some point those would seem to slip away from the intent of the tag, 'traditional'. A drop-point 110 with nylon scales starts to look awfully modern to me. And, of course the Buck 110 has it's own challenge. I think the intent here is to dip back into older styles of knives and work with those. Since all modern knives are essentially built on the traditions of traditional knives, I think it's challenging to define the "Traditional" category. Is a Spyderco Endura a Traditional? Nah. But it's no different than a 110LT, really. In that sense, I think it would be better to go with the J.E. Made which is clearly a modern take on a Traditional design (clip point, slip joint).
My 2¢.
(Steve beat me to the punch.)
-
Traditionalists:
01 - Barry Rowland (with a sodbuster)
02 - Nix (with another sodbuster)
03 - Dean51 (with a GEC)
04 - SteveC (with a drawerful of knives)
05 - Fuzzbucket (with a size appropriate knife)
06 - RF52 (once he gets a sweet trad)
07 - Wspeed (with more size and law appropriate knives)
08 - Borg (with one or more that may or may not qualify)
09 - Antti Lammi ( Opinel N°09 )
10 - zrxoa1 (with.....)
11 - Greg Jones (Grohmann modern classic)
12 - Anka (with a genuine Barlow) -
@cody6268 said:
Sounds interesting. I've been trying to save up for a GEC Calf Pen (cheapest I can buy locally), and may do it with just that once I get it. I did the original (though I didn't request a badge) and I did one for the badge in Feb. Sticking to one traditional for 30 days will be a real challenge. I change just about daily.The rules don't require sticking to one, but it is encouraged.....

-
@Nix said:
At some point those would seem to slip away from the intent of the tag, 'traditional'. A drop-point 110 with nylon scales starts to look awfully modern to me. And, of course the Buck 110 has it's own challenge. I think the intent here is to dip back into older styles of knives and work with those. Since all modern knives are essentially built on the traditions of traditional knives, I think it's challenging to define the "Traditional" category. Is a Spyderco Endura a Traditional? Nah. But it's no different than a 110LT, really. In that sense, I think it would be better to go with the J.E. Made which is clearly a modern take on a Traditional design (clip point, slip joint).My 2¢.
(Steve beat me to the punch.)
That was my plan, but wondered about the 110 Classic and the 110LT. I have a Winchester 112 clone as well.
Sent from my iPhone using Tapatalk
-
The JE Made is my choice. I love that knife!!!

Sent from my iPhone using Tapatalk
-
A real looker.

-
I'm in, I love traditional slip joints. I have a green bone Case Russlock I am fond of. What might make this a funner challenge: traditional pocket tools! The P38, the four way screw driver, key chain nail clippers, pair of pliers instead of a MT. Maybe I'm just nuts, but that might be kind fun.
-
I like where you are going with this......

-
Traditionalists:
01 - Barry Rowland (with a sodbuster)
02 - Nix (with another sodbuster)
03 - Dean51 (with a GEC)
04 - SteveC (with a drawerful of knives)
05 - Fuzzbucket (with a size appropriate knife)
06 - RF52 (once he gets a sweet trad)
07 - Wspeed (with more size and law appropriate knives)
08 - Borg (with one or more that may or may not qualify)
09 - Antti Lammi ( Opinel N°09 )
10 - zrxoa1 (with.....)
11 - Greg Jones (Grohmann modern classic)
12 - Anka (with a genuine Barlow)
13 - getahl (with a Russlock and a P38) -
Traditionalists:
01 - Barry Rowland (with a sodbuster)
02 - Nix (with another sodbuster)
03 - Dean51 (with a GEC)
04 - SteveC (with a drawerful of knives)
05 - Fuzzbucket (with a size appropriate knife)
06 - RF52 (once he gets a sweet trad)
07 - Wspeed (with more size and law appropriate knives)
08 - Borg (with one or more that may or may not qualify)
09 - Antti Lammi ( Opinel N°09 )
10 - zrxoa1 (with a JE Made slipjoint)
11 - Greg Jones (Grohmann modern classic)
12 - Anka (with a genuine Barlow)
13 - getahl (with a Russlock and a P38)Sent from my iPhone using Tapatalk
-
Traditionalists:
01 - Barry Rowland (with a sodbuster)
02 - Nix (with another sodbuster)
03 - Dean51 (GEC Bullnose)
04 - SteveC (with a drawerful of knives)
05 - Fuzzbucket (with a size appropriate knife)
06 - RF52 (once he gets a sweet trad)
07 - Wspeed (with more size and law appropriate knives)
08 - Borg (with one or more that may or may not qualify)
09 - Antti Lammi ( Opinel N°09 )
10 - zrxoa1 (with a JE Made slipjoint)
11 - Greg Jones (Grohmann modern classic)
12 - Anka (with a genuine Barlow)
13 - getahl (with a Russlock and a P38) -
When i was out for a walk at the weekend i found this bit of antler..

As soon as i saw the curve i knew what it could be used for :D

I am so tempted to finish this off and use it for the challenge, pointy sticky out bits at both ends might be an issue for carrying though

-
That looks really good Borg

-
Thanks Speedy, still need to finish the slot and beef up the pivot a bit probably with a sleeve, not sure antler can take the stress
i will check, this type of knife has probably been used for hundreds of years so i'm guessing it wont take much to make it usable 
-
It couldn't get more traditional that that!
I'm looking forward to seeing how it comes out. If it stays pointy...perhaps a slip sheath for the pocket?

-
I hope the antler is strong enough Borg

It would be nice to know how strong antlers are
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


