Rescue Tools in submerged/flooded cars
-
Cool article.
I've used mine once on an old car door and it's an instant exit.
Mine is on my carkeys and I have a second one in my pack because public transportation does not offer window breakers anymore.The resQme is cheap and effective.I wouldn't wan to miss my resquetool, but would not want to miss my resQme either.
-
I recall a conversation about the laminate windows in vehicles? While the spring loaded device works well, I have a spring loaded center punch in my vehicle, I recall it may not be effective on laminate glass?
FMVSS 226 occupant ejection mitigation requiring laminated side glass in all 2017 vehicles ( from net ).
-
@Aloha said:
I recall a conversation about the laminate windows in vehicles? While the spring loaded device works well, I have a spring loaded center punch in my vehicle, I recall it may not be effective on laminate glass?FMVSS 226 occupant ejection mitigation requiring laminated side glass in all 2017 vehicles ( from net ).
it really pays to figure out what kind of glass was used in your car (especially outside of the US, where there is no regulation (yet)).
ResqMe has a good video on that topic
https://www.youtube.com/watch?v=8oZokI0UrHI&t=7s -
@Etherealicer said:
it really pays to figure out what kind of glass was used in your car (especially outside of the US, where there is no regulation (yet)).ResqMe has a good video on that topic
https://www.youtube.com/watch?v=8oZokI0UrHI&t=7sSoo; that means the 2015 Ford Escape (basically a Kuga for those of you outside of NA) my folks have has laminated glass. So, guess that means I'll need to pick up a Rescue Tool.
-
You might want to double check. I believe the window will be marked "laminated". Also you can check the top edge and see where the glass is laminated.
-
@cody6268 said:
Soo; that means the 2015 Ford Escape (basically a Kuga for those of you outside of NA) my folks have has laminated glass. So, guess that means I'll need to pick up a Rescue Tool.And gloves...
Depending on your physical abilities, you might be better off pushing the front windshield out with your legs, rather than cutting the window open with the Rescue Tool. Though it seems to be though too (I have seen a video of a girl doing it, more flexibility, less strength, but I can't find it presently).
https://www.youtube.com/watch?v=wI7ZBw8E_ms -
Since the thread is about Submerged/Flooded vehicle I'm afraid time is of essence. Getting out of the vehicle quickly is going to be rather tricky. Not sure kicking out windshield would be very effective or possible.
As to what tools in an accident to assist you or others not submerged or flooded? Depending on the situation time may still be a factor. If vehicle is on fire for example. I have a spring loaded center punch in my vehicle. I also have gloves at the ready. The idea of a submerged vehicle really scares me whether me or someone I am trying to help.
-
@Aloha said:
Since the thread is about Submerged/Flooded vehicle I'm afraid time is of essence. Getting out of the vehicle quickly is going to be rather tricky. Not sure kicking out windshield would be very effective or possible.As to what tools in an accident to assist you or others not submerged or flooded? Depending on the situation time may still be a factor. If vehicle is on fire for example. I have a spring loaded center punch in my vehicle. I also have gloves at the ready. The idea of a submerged vehicle really scares me whether me or someone I am trying to help.
Spring loaded is clearly your best option if you have tempered side windows... it is useless if you have laminated side windows.
Alternatives are:
- Pushing out the windshield with your legs (takes strength and a degree of flexibility)
- Disc saw (exhausting, slow)
- Big axe (needs room to operate, heavy)
- Get a powered glass cutter (e.g. THE RIPPER) (higher cost / maintenance)
- anything else?
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Anything needing a battery will require keeping an eye on to keep charged
. I keep coming back to submerged and with that the options are very limited I think. Getting out of the vehicle will be challenging to say the least. We saw myth busters and he had a heck of a time. I think the verdict was not good.Now as for helping someone, I think "easy" is best. Watching the video of the Victorinox Rescue Tool handle that windshield was promising even for someone hurried. Not much help if that person is you in the submerged car sadly.
-
- anything else?
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
a loaded handgun :D
-
@ThePeacent said:
a loaded handgun :DIf my understanding is correct then that won't work... would create a small hole and some spider web, but it would still be in place and not shatter. After all if you take thick enough laminated glass it is what is called "bullet proof glass" (correct would be bullet resistant).
-
@Aloha said:
I recall a conversation about the laminate windows in vehicles? While the spring loaded device works well, I have a spring loaded center punch in my vehicle, I recall it may not be effective on laminate glass?FMVSS 226 occupant ejection mitigation requiring laminated side glass in all 2017 vehicles ( from net ).
This is a serious consideration.
I once had a talk with a fireman that just returned from a scene with a crashed Seat. The car was front first in a ditch with water and rubble. Because if the laminated and plastic windows they could not use a window smasher and had to cut open the car with one of these...
Where this takes the firemen an unnecesary long time to get in a vehicle it also means that the driver isn't always able to get out of a car.
Keep this in mind.By the way, the ResqueTool has a window saw. This is for cutting laminated front windows.
-
@Mactire404 said:
This is a serious consideration.
I once had a talk with a fireman that just returned from a scene with a crashed Seat. The car was front first in a ditch with water and rubble. Because if the laminated and plastic windows they could not use a window smasher and had to cut open the car with one of these...
Where this takes the firemen an unnecesary long time to get in a vehicle it also means that the driver isn't always able to get out of a car.
Keep this in mind.By the way, the ResqueTool has a window saw. This is for cutting laminated front windows.
And today's cars are tough to access even using hydraulic rescue equipment. Today's hydraulic rescue tools are designed to pry and cut today's modern automotive materials (such as boron steel). Older sets aren't engineered to handle these materials and design, but departments can't afford them, and in some cases, are stuck with first generation sets from the '70s and '80s. Jaws of Life/Hydraulic Rescue sets these days are in the $50,000 range, and most departments simply can't afford that. Around here, funding exists, but is going to tourism and business ventures instead of where needed.I know of front line trucks that date to the '70s. My town's heavy rescue is close to 30 years old; and their crash truck 15.
-
@cody6268 said:
And today's cars are tough to access even using hydraulic rescue equipment. Today's hydraulic rescue tools are designed to pry and cut today's modern automotive materials (such as boron steel). Older sets aren't engineered to handle these materials and design, but departments can't afford them, and in some cases, are stuck with first generation sets from the '70s and '80s. Jaws of Life/Hydraulic Rescue sets these days are in the $50,000 range, and most departments simply can't afford that. Around here, funding exists, but is going to tourism and business ventures instead of where needed.I know of front line trucks that date to the '70s. My town's heavy rescue is close to 30 years old; and their crash truck 15.Also, cutting the beams (holding the roof) almost requires a EOD team with the high possibility of airbags in place. Cutting one can make them co pop, endangering the fireman or the passengers.
I don't envy firemen these days. -
@Mactire404 said:
Also, cutting the beams (holding the roof) almost requires a EOD team with the high possibility of airbags in place. Cutting one can make them co pop, endangering the fireman or the passengers.
I don't envy firemen these days.Man I never envied people who have to go to accident sites... but I think I would prefer a slightly more difficult rescue of less injured person to the "good old days". Seriously, the improvement in structural integrity means the driver/passengers are less badly injured (less loss of limbs because the windows stay in place, less crushing as the whole carbine is stronger). It also means that if the heavy gear has to come out, the airbags have already been deployed, so no danger there.
Furthermore it makes braking into cars and carjacking harder.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login