DIY Glow in the dark and Semi-transparent 91mm scales & Youtube tutorial
-
DIY Glow in the dark and Semi-transparent 91mm scales & youtube tutorial



Part 1
Making Transparent scale from Victorinox 91mm Silvertech scale

Making a transparent scale from Victorinox 91mm silvertech scale is a waiting game. Some of our modders have done it in past here and I will post relevant reference links at the end, and my process is rather similar.
Executive Summary: Strip the original paint off of Victorinox 91mm Silvertech scale, and apply a mixture of epoxy resin with Glow-in-the-dark(GITD or GID) powder to make it GID.

Day5
I started off by submerging the scales face-up in ~300ml of white vinegar(5% acidity) in a plastic container for the first month.
Checking on it from time to time, you will be able to see the silver paint coming off of the scales in flakes in the first few weeks. Later on, some transparent paint might be floating around inside the container.
Day36
And at the end of the first month, most majority of the silver paint would have been stripped off.
I have read the process is correlated to temperature and acidity. I think of the two sets I have tried, the temperature being around 24-28C for the most part, the two sets' results are consistent.
Day 41
After the first month, I dumped the old vinegar and poured in new vinegar to look for improvement, but the improvement is really slow and marginally noticeable. Basically, I think the scales have turned completely transparent (with some haziness) after the first 1.5 months.
Day53
I tried adding in various degree of sea salt to the solution to increase it's acidity for the last two weeks. But I really couldn't see another difference after that 1.5 months.
I stopped right before reaching two months of time.
I used Acrylic repair paste(you could find something similar in US Container store called "Novus", absolutely fantastic product to remove scratches and restore the SAK scales to its original state) to see whether I could reduce the haziness, but the effect is only nominal. YMMV.
Overlaying the 'transparent' scale over the SAK mod for the effect, I later proceed to use these scales to make them GID.Part 2
Making GID 91mm scale


So while waiting for the scales to turn transparent, I ordered some glow in dark powder and the epoxy from the States. I got my GID powder from Glow.inc. I'm no GID expert, but from my flashlight modding days 10-15 years ago, I could tell these GID powder is of pretty good quality.
Epoxy wise, it is entirely up to you what to get. I would advise against anything that cures within 1 hour simply because more cure time you have, more time to make it work. Definitely do test it out before mixing in the powder/coloring, to familirize yourself with the cure time. And in case you made too much, you could even use it for other applications. Also, the epoxy cured color is important, if it is not transparent, it could be white/yellowish/grey which might not be suitable for the mod. Personally, I have tested and used Art n Glow AB epoxy with pretty good results.In my experience, 2g of AB epoxy and 2g total of GID powder is enough to fill in all the partitions of 1 pair(front and back) of Victorinox 91mm 'transparent' scale.

For accuracy, please use a scale to make sure all the proportions are 100% correct. This is exceptional true for the epoxy curing, since we are making a very small batch and one or few drops less/more might affect how it cures(or it might not cure at all). Also, once mixed throughly, I use a lighter to quickly flash/flame the epoxy to 'pop' any surface bubble before application.
For my Victorinox GID scale mod, I find a 50/50 mix of GID powder vs epoxy is a decent combination. Ideally, you do want enough powder in the solution to achieve maximum GID effect, but too much powder might make it difficult to apply and trapped bubbles could be hard to escape. It will take some time to fill in the partitions one by one(I recommend using a toothpick to 'drip' it in), and be prepared to use Q-tip to wipe clean the overflowing. When you successfully filled in the mix, use the lighter again to quickly flash the epoxy to pop any bubble forming.Once again, cure time and mix ratio are both crucial. Too little cure time or too heavy the mix could both be counterproductive.

It might be beneficial to work in a semi-dust free environment, and once the epoxy starts to settle, I put them inside a 'leveled' box to keep it dust free to dry.
Before putting them onto the SAK, I used dremel to make two small divots for hosting the backside tool pin rivets. Remember to wear a mask when doing this, I am not 100% sure GID epoxy resin is safe to breath in...
Also, due to all the partitions are now filled with epoxy and there is less flex in the scale, it will be a lot more difficult to put the scales on, vise with leather wrapped around the SAK will be helpful.


**Thank you for reading! **If you are interested in my 91mm Mountaineer Mods, please do visit the following links on MTO or possibly my youtube video:
https://www.youtube.com/watch?v=k2FMClMqc4UMy other 91mm mod writeups:
91mm SAK mod 'Mountain Tinker'
Victorinox 91mm mod "Mountain Yeoman" with Transparent GID scaleSome references to other links:
Coloring SAK Scales
/post/1409145
Folks on MTO using the vinegar method to strip the paint and make it transparent
Btw Etherealicer, I'm a fan of your youtube channel, rich with SAK modding resources, highly recommended.Making a transparent SAK
/post/822014
Nhoj made a transparent scale from scratch, very interesting and completely different route!Victorinox Silver Tech. Removable scales?
/post/453693
Neil has a different approach to utilize the Silvertech scale, looks great and fun to do.Slivertech Mod
https://www.youtube.com/watch?v=uADQFmUmpKI
Boss made this video back in SOSAK days -
Few pictures directly uploaded to MTO for future prosperity:




-
Very nice! Really like the glow and color

Sent fra min FRD-L09 via Tapatalk
-
Great job, Comis! And a very good video tutorial, I clicked right away when I saw it my subscribed feed.

-
Fantastic idea, explanation, pictures and thread Comis - Very well done - beautifully explained - and fabulous result

Brilliant - Thank you - Oh and thanks also for the MTo plug in the vid :D
Can't believe two months though for the scale stripping! No quicker way? ??? - Or would any other way damage the scales - No wonder this thread took a while to complete - That's patience!!
- I have added the thread to the mod guide stickie

- I have added the thread to the mod guide stickie
-
to what's been said already 
Excellent tutorial and pictures.... even a vid!
Thank you
-
Wow...I didn’t realize it took that long to make a set of GITD scales! Great video on YouTube. Great thread and photos.

Thanks for sharing with us!
-
@Huntsman said:
Fantastic idea, explanation, pictures and thread Comis - Very well done - beautifully explained - and fabulous result
Brilliant - Thank you - Oh and thanks also for the MTo plug in the vid :D
Can't believe two months though for the scale stripping! No quicker way? ??? - Or would any other way damage the scales - No wonder this thread took a while to complete - That's patience!!
- I have added the thread to the mod guide stickie

I guess one could say it is practically done by around 1.5 months(as shown in video), but I find some traces of transparent film kept peeling even afterwards. I tried adding salt to the vinegar, but I think it only does it for the copper coin, not much difference for scales. I heard warming up the vinegar may speed up the reaction, but I wonder how much faster vs risk of warping the scales, and the tradeoff may or may not worth it. The only way I could think of maybe heating up the vinegar and vaporize some of the water to increase the concentration of the acid, but that is an exact science, and even doubling the acidity might be potentially harmful if get into eyes.

Thanks a lot for the stickie! What a pleasure!

- I have added the thread to the mod guide stickie
-
@McStitchy said:
to what's been said already 
Excellent tutorial and pictures.... even a vid!
Thank you
Thanks Stitchy! I wish you would stay longer in your joint challenge with Fuzzy. You two are fun to watch!
-
Not a problem!

-
with all the great comments. I thought you did a fantastic job very detailed. Thank you for posting this to MTo and youtube. 
-
-
Great job and excellent writeup!
[It's not failure if you learn something from it]
-
@kottskrapa said:
Great job and excellent writeup![It's not failure if you learn something from it]
I know you were planning to make something similar, hope this is relevant! -
It really is! Now I just have to find the time
[It's not failure if you learn something from it]
-
Nice tutorial!
Great pictures and video Comis

-
Very nicely done Comis, and you must be a much more patient man than I am

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login