Spirit owners club
-
The scissors blades on both my Spirits fit so closely together that I find they occasionally bind after cutting stuff. A little annoying, but not a big problem. Anyone else find this?
-
The Spirit gets an honourable mention where I work over the last couple of days. We've been having a bit of a refit, removing old panelling and fitting gun locks to the wall. The Spirit came in handy for pulling a multitude of old rawl plugs out, and general cutting duties. The long screws for the gun locks were driven in by the rechargeable drill, we'd have been there all night with the Spirit's phillips driver or indeed a LM driver :)
-
Danny the idea of an adapter that fits over the tool isn't always a good idea . Victorinox got it right by having a seperate one because the idea is if you need to hold a nut/bolt with a screw on the end you use the adapter in the other hand , your not going to be able to do it with the driver attached to the tool .
Dunc
-
yet another bit driving query!
has anyone tried the LM flat double ended bits in the plus drivers? especially the ratchet?
I've quasi joined the spirit owners club, I bought one and my girlfriend has snatched it up(look for a juice CS4 up for sale when it gets back from LM).
I love the spirit so much I'm getting another for myself, but I want to sort out how I'll drive the LM bits in my 'kit'
-
@DannyZRC said:
yet another bit driving query!has anyone tried the LM flat double ended bits in the plus drivers? especially the ratchet?
I've quasi joined the spirit owners club, I bought one and my girlfriend has snatched it up(look for a juice CS4 up for sale when it gets back from LM).
I love the spirit so much I'm getting another for myself, but I want to sort out how I'll drive the LM bits in my 'kit'
Doesn't work, they flop around all over the place. Sorry to be the bearer of bad new.
Neil
-
Not quite. They do flop in the ratchet part but they work just fine with the extension. You juts have to put them in such a way that the extension holder spring engages their side. Plus I'm not sure but I have the impression that the LM bit extender will also fit the ratchet just fine.
-
Trust me to do only half a job

Neil
-
They won't fit in yours?
They won't work with the ratchet alone as there is not enough spring tension to hold them still, but they work with the ratchet extension. You just have to put them in the right way. Of the three possible orientations (being a flat bit it means they only have 2 of the 6 edges) you just have to use the one that makes the edge of the bit stand against the protruding part of the holder spring. I'm using that setup for a couple of weeks and didn't have any problem so far. I checked with the L-shaped one as well. It's the same thing. Of course the fit is not the same as if having a real six-edged bit but at least they won't fall out and in a pinch you can do your job. -
My Spirit X arrived , I'm very pleased with it , will it displace the Standard Spirit/ Farmer combo ? Only time will tell . A buddy of mine and I did a mini group buy , he got a black rescue tool , I got the Spirit X . He instantly fell in love with the belt cutter on the rescue tool , I'm very happy with the Spirit .
Chris
-
Soon I'm joining this clique because I only need about ten dollars before I can pay for a Spirit X. I'm so excited!
-
Couldnt resist. Just ordered a something called "SwissTool Spirit Plus Multi-Tool 53802". It seems to have serrated blade (that is it only con), scissors and leather pouch. Now only have to wait and then hide it from wifey

-
Nice one mate

-
The postman didn't bring my Spirit X today :( Maybe tomorrow .
Dunc
-
Chin up mate, I'm sure it won't be long now :)
-
-
Heres the pics of the newly arrived Spirit X
First peak inside the box from Tim :D

Straight to the poses




My Spirit collection , Left std middle BO S and X on the right


The sheath was a bit of a surprise :o It shares the same part number ( stamped on the back ) but the leather is different . My old one is on the left .

All three together including nylon one for my BO S . All are the same design .

I also got a Vic ratchet which I'm really pleased with but more about that later .

While there is no play in any of the blades or plier heads there is quite abit of up and down movement in the plier springs when closing the pliers . I've seen this before on Spirits but its very noticeable on this one but doesn't effect use in any way . Anyone else notice this on their Spirits ?
So my Spirit collection is nearly complete , I just need the Swiss Army issue BO one with blasting cap plier head .
Dunc
-
congrats buddy

-
Great shots mate, the X is a nice one isn't it.
I'm just waiting for Tim to get those Crimper Spirits in stock - the only place I've found them so far would cost me over £100 before import tax :(
-
Damn that looks good Dunc

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login