OOPS! - SAK Production Errors
-
OK my turn to play one of Kamakiri's guessing games - And the answer will be revealed - Not that you Knights will need any help to find it!
Here's an image of a seven layer Champion from the Wiki Champion page:
https://sakwiki.com/show_image.php?id=1393Spot the error in the photograph.
And for a bonus point explain how this error came about. !!
-
It's a pre-'85 knife sans chisel?
Pre-'79 saw? -
I think you've got it - Comparing text to image - Right? - Can you expand ?
And how did it come about? - This is just my conjecture!
-
There's actually a lot to expand on...
The root cause is that photos like this weren't updated as changes were made. This is typical of almost all their printed material. In this case, based on the pic, the knife is c. '77/'78. So there's a whole lot that changed between then and when chisels were introduced.
hump on the small SD
eye in the awl
90º stop on the caplifter
dropping to the tip grind on the awl
bevel on the mag glass
and some other stuff that's not visible in the pic... -
envy...I got a lot to learn fro youz guyz. -
Yep the answer I was looking for is - "When the chisel was introduced they used the picture from the previous guide in the updated tool guide"
- Just adding the chisel text to the guide, and a number on the diagram labeling a chisel that is not there!! :o
Naughty, lazy Victorinox
You can see both tool guides here:
https://sakwiki.com/tiki-index.php?page=ChampionThe other changes would be less visible/obvious/important to a user! Although the hole in the awl is quite significant
EDIT: Kamakiri's observation on the catalogue page above and not re-shooting photos reminded me of this one!
- Just adding the chisel text to the guide, and a number on the diagram labeling a chisel that is not there!! :o
-
More +PAT fun...
.

-
This time, a c.’82 Fisherman.


-
A spacer is missing from the Electrician on the right.

-
Wow - That's significant!! - Does the awl rattle/slip/move ?
-
@miklospinter said:
A spacer is missing from the Electrician on the right.
That’s gotta be a rare mistake! Thanks for sharing.

-
Maybe a stretch on the definition of error...but this time, a copy of the ‘rare’ c. late ‘72 scaler with the first ruler markings. The bottom copy shows clear wear of the metric side numbering. The ‘1’ mark isn’t really visible.
.

-
I bought the pictured "Huntsman with Pouch" in a (sealed) blister pack some time ago on eBay (I like gifting them, so I usually keep at least one "in stock"). When it arrived, I first noticed what you can see in the first image: The SAK is improperly placed in the blister pack (it should be placed with the front scale being the visible one). Upon closer inspection, I discovered much bigger issues that can be seen in the second image:
-
The SAK is dirty.
-
The (visible) back scale is only partly attached (there is a big gap between the scale and the liner it's supposed to touch).
-
The front scale is completely missing (and I'm thus guessing that the tweezers are also missing).
So this is a seriously messed up SAK in a sealed blister pack. ??? Not very common, I think (but seems to speak for itself about the imperfection of quality control at Victorinox). The question now is what should I do with it? If I'll keep it as is, I will be in possession of a somewhat unusual item, but will never know how messed up this SAK really is. If I'll open it, my curiosity will be satisfied, but I will likely end up owning nothing other than a messed up SAK (unless I'll discover some interesting defect other than dirt and a missing scale that could explain why the SAK is in this state). So...
What should I do?
Opinions?

-
-
^^^ That is completely bizarre - How could that possibly happen? ??? - Double/treble QC errors!!
And how they actually put that thing in a blister pack is staggering- I am assuming that the only way that could be - Is if the packing process is automated and somehow that duff SAK made it to the packaging machine.
You gotta save it / keep it - But send Vic the photos and ask for compensation.
Eg Another Huntsman -
Trouble is I guess for that they'd insist on getting the old one back@KK - Is that a stamping error? - I assume it's not wear and tear
-
@Huntsman said:
You gotta save it / keep it - But send Vic the photos and ask for compensation.
Eg Another Huntsman -
Trouble is I guess for that they'd insist on getting the old one backI expect that they will be happy to exchange this smoking gun in order to erase it out of existence, but find it hard to believe that they will provide any compensation for just photos.
I'm going to keep it, but find it frustrating that I don't really know exactly what's inside the pack (how bad is it?). Maybe I'll open it just to know. Maybe not. Blister packs can be VERY annoying.
:ahhh -
@MiniChamp said:
I expect that they will be happy to exchange this smoking gun in order to erase it out of existence, but find it hard to believe that they will provide any compensation for just photos.I'm going to keep it, but find it frustrating that I don't really know exactly what's inside the pack (how bad is it?). Maybe I'll open it just to know. Maybe not. Blister packs can be VERY annoying.
:ahhhThis is really unusual. I would visit the Victorinox store and open the blister with the staff. It seems that the packer decided to update his knife.
-
Never been quite sure about this one. I bought it new something like 6-7 years ago so I know it's direct from the factory and was on a current card back. I understand that the Sportsman sometimes doesn't have a keyring, but the missing sewing eye on the awl has me confused.
So; mistake or not?
-
@jnoxyd said:
This is really unusual. I would visit the Victorinox store and open the blister with the staff. It seems that the packer decided to update his knife.Good suggestion...but I suspect the ‘Bay seller. Sincerely doubt this is a Victorinox issue.
Blister packs with card stock aren’t the same as those that are sealed by melting the two PE layers together at the perimeter.
-
@Gareth said:
Never been quite sure about this one. I bought it new something like 6-7 years ago so I know it's direct from the factory and was on a current card back. I understand that the Sportsman sometimes doesn't have a keyring, but the missing sewing eye on the awl has me confused.
So; mistake or not?Seems like a mistake to me, but there were other size models that the eye was deleted.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login