Vintage SAK Owners Club
-
Yes it was worth doing. Hope you are going to use nickel silver rods for rivets [emoji6]
-
@jnoxyd said:
Yes it was worth doing. Hope you are going to use nickel silver rods for rivets [emoji6]
Of course! And for the shackle too.I turn down the pins myself to 2.25mm from 3/32” stock ~2.37mm. I can re-use the long pin and 4th pin since they came out without material removal.
I’m going to try for the earlier style of shackle lugs that went into the early crab claws. Probably not the right style, but I haven’t made of that type before. Those usually go with the scales that have the nail relief for the corkscrew. This one is later than that and should probably have the ‘flatter’ style lug.

-
Great plan! Let us see what happens, please.
-
Kamakiri, looking forward to seeing how this project goes!

-
Here are some of my latest finds (I've already shown the Richartz Solingen from Germany on the far right in another thread)

- Victorinox 234 Bgl. (Spartan).
I suppose it's from late 40's early 50's...





- Wenger ? (Commander)
Measuring 82 mm, but I can't find not much more information to date it. Apparents rivets and can opener type claw "army style"



- Unknown brand.
Measuring also 82mm, really nice and every blades are closing like a gator ;)




I let the gurus of vintage sak telling more... ;)

- Victorinox 234 Bgl. (Spartan).
-
Looks good [emoji106]
-
@jnoxyd said:
The main problem for me is getting proper length after hammering the ends of rod [emoji38]No kidding. I use an offset from the pin center or ‘eye’ for control. If forming for widening also lengthens too much, then I gotta quickly figure out if there’s enough width or material toward the center. Always an issue with the second end.
I’ve tried 2.0mm wire, but I can’t seem to make it work...yet. Would save a lot of time.
-
You are right, 2.0mm rods fit better for both bail versions (pre and post 1957). What is the problem with them? Here’s post 1957 version hand made bail together with original one

-
@jnoxyd said:
You are right, 2.0mm rods fit better for both bail versions (pre and post 1957). What is the problem with them? Here’s post 1957 version hand made bail together with original one
Nice work!

Nothing wrong with the 2.0mm wire...just the guy wielding the hammers! (Apparently)
I was already intent on trying again with 2mm...as I’m sure that’s the way they were originally fabricated in forming dies. I just haven’t been able to move enough material the right way.
Also makes me think we could or should have a vintage restoration thread.
The data dump and lost posts gives me pause. -
@kamakiri said:
I was already intent on trying again with 2mm...as I’m sure that’s the way they were originally fabricated in forming dies. I just haven’t been able to move enough material the right way.How do you make loop hole ? I use conical awl instead of drill for keeping enough metal for loop.
-
@jnoxyd said:
How do you make loop hole ? I use conical awl instead of drill for keeping enough metal for loop.
That never occurred to me!!

Punches, modern awls, needle files, burrs and drill bits...are what I’ve been using.
Ironically, I’ve always assumed a cone or cut/frustum of a cone were used in the original forming dies.
I’ll have to try the conical awls. Now I gotta figure out which one to use!

Glad to help, I only wish I could narrow it to specific year(s). In the sampling of 5 knives below from between roughly ‘47/‘48 and ‘52/‘53, yours appears to be closest to the second.

-
Wow - they look great!

-
@Rizio Il Ghiro said:
Wow - they look great!

Perhaps my favorite era to collect, But certainly fun to restore!...
Decided to try the 2.0mm wire again for the shackle. Still tight on material but some changes in my forging techniques let me move forward with one of the smaller profiles.
Gonna turn one of my pins down to about 2.20-2.21 or so to help make it work. Re-forged the original shackle pin back into shape and 2.25mm dia., but I don’t want to turn it down in size.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

