Knot in October GAW
-
My third entry is the Les Stroud Tautline Hitch
This was shown by Les Stroud in Survivorman - 7x03 - Transylvania Part 2.
It is a variation of the Tautline Hitch.
It is a good way of securing a tent line around a tree/tent peg.
Even under tension, it can be tied very easily and adjusted to secure the line.
It creates an adjustable loop, but it is not a noose. It is a friction hitch. Pulling the line will not tighten the loop. There is too much friction.
To adjust the loop, the cord must be held and the knot moved with the other hand.How to tie it:
-
Once the cord passes around the tree or anchor point, you will have the taut line and one loose end.
-
Pass the end over the line.
-
Pass the end through the loop three times (or more if you want more friction).
-
Pass the end around the loop from under it and go through the small loop from above.

-
Pull the end away from the anchor point, while pushing the coils so they line up and stack neatly onto each other.
-
Secure the end with a half hitch, by going over the line and coming through from under.

This knot allowed my clothesline to be tied with no length wasted. I anchored the line to two hooks and tied this knot with the otherwise excess length to the line. Voila. A little more space for clothes.


And as an extra bonus, here is Les Stroud himself showing us how to tie it.

He calls it the Bill Mason Knot.
https://www.youtube.com/watch?v=OfAMKjgKpXw -
-
Nice!

I've never seen this knot before. It seems to be a variant of the Adjustable Grip Hitch.....which is another great friction hitch. I just tested it out; I really like this version!
Sweet entry--I learned another new knot!

I did a quick search and didn't find a "Bill Mason knot". Can we call it a Bill Mason knot? Anyone have a better name for this knot?

-
I searched for Bill Mason knot and got nothing, which is why I called it the Les Stroud Tautline Hitch.
Quite a handy friction hitch and easy to tie.
-
I like it!
-
How did I knot know about Knot-tober

Great stuff everyone

Would be fantastic to have a post at the end with a list of links to the knot posts as a reference.
I use a clove hitch regularly for tying loads on my trailer, and a simple quick "trucker's hitch" for cinching down the load which isn't too hard to take out of the rope at the end.
I have a free app on my phone which can be good reference for many of the knots shown here.
Fascinating to see how a knot is constructed and how it does what it does. Amazing to see how the same knot can be tied in multiple different ways, either with all the steps or with multiple loops and just take this one over another etc and bam!
-
For sure!

-
Period 3 Knot - Marlinspike Hitch
This is a pretty basic knot

- The Marlinspike Knot starts by forming a loop with the working end going behind the standing.
- Move the loop so that it lays overtop of the standing end with the standing line bisecting the loop
- From behind the knot, push the portion of the standing line that lies inside the loop up into the loop to form a partial loop perpendicular to the original loop
- slide a stick, screwdriver, marlinspike, etc through the new partial loop, overtop of the first loop
- pull on both end to tighten
Here is a picture of the knot, taken at an angle, prior to slide stick through so the partial loop can best be seen.

This knot is used to help pull a rope/knot tight by pulling on the stick rather than just gripping and pulling on the rope. This is especially help with cold or sore hands, or if there is weight or tension on the rope. When pulling it is best to put a hand on each side or if the stick is too small and rope thin then fingers on each side of rope. Carabiners can also be used in place of sticks and fasten gear to them.
It is able to be used for making a quick ladder by placing rope with a marlinspike knot on each side of each rung. I would not want to have to use this for any kind of height due to the sticks only being held in place by tension on the knots. But if wanting to form a ladder to use a hanging storage where small bags or other objects hang from the rungs, it works well for that.
I’ve used it as a quick temporary replacement handle on a pull cord in the past. Here is a picture of the Marlinspike knot on a stick (dog treat).

-
@ReamerPunch said:
My third entry is the Les Stroud Tautline Hitch
This was shown by Les Stroud in Survivorman - 7x03 - Transylvania Part 2.
It is a variation of the Tautline Hitch.
It is a good way of securing a tent line around a tree/tent peg.
Even under tension, it can be tied very easily and adjusted to secure the line.
It creates an adjustable loop, but it is not a noose. It is a friction hitch. Pulling the line will not tighten the loop. There is too much friction.
To adjust the loop, the cord must be held and the knot moved with the other hand.How to tie it:
-
Once the cord passes around the tree or anchor point, you will have the taut line and one loose end.
-
Pass the end over the line.
-
Pass the end through the loop three times (or more if you want more friction).
-
Pass the end around the loop from under it and go through the small loop from above.

-
Pull the end away from the anchor point, while pushing the coils so they line up and stack neatly onto each other.
-
Secure the end with a half hitch, by going over the line and coming through from under.

This knot allowed my clothesline to be tied with no length wasted. I anchored the line to two hooks and tied this knot with the otherwise excess length to the line. Voila. A little more space for clothes.


And as an extra bonus, here is Les Stroud himself showing us how to tie it.

He calls it the Bill Mason Knot.
https://www.youtube.com/watch?v=OfAMKjgKpXwNice one, seems to be a very handy knot to know

Sent fra min FRD-L09 via Tapatalk
-
-
@Sos24 said:
Period 3 Knot - Marlinspike HitchThis is a pretty basic knot
Might be basic, but it is a great knot to know and have in the back of your mind!
I like to hang my pack up off the ground when out hiking or camping. I'll use a bit of cordage to fix a line to a tree limb, then your Marline Spike hitch to turn a branch or carabineer into a hanger. It can also be handy to use to capture a toggle which can then be used with a loop or grommet.
When I use it, I do try to keep the knot loaded.

-
Great knots for this period.
. That Les Stroud is one I'll have to learn. Marlinspike, this knot looks like one I'll also need to have in my back pocket. -
I have a booklet with 20 common knots. I never used any of them.
The most useful knot I´ve seen here is Steve´s fish hook knot. Useful for my flies, all my other hooks are eyeless.
-
I've got a spoiler knot just for you, Ron.
I'll post it up soon. :D
-
TIP
When you tie with nylon fishing line, always wet the knot with a bit of spit before pulling tight.
If you don´t, the nylon will suffer friction burns and the knot will knot be as strong; your line may break. -
Here is the spoiler knot I selected with Ron in mind:
Ashely calls it the "Espalier Knot". He says it gets used to draw a plant up to a support using a length of twine.

It has three nice virtues: 1) it is simple and easy to tie, 2) it gets tighter as you tie it, 3) it provides 2:1 leverage, so it can be made quite tight.
I start with a Cow hitch, the two tails run through a bight:

and snugged up a bit:

The two tails are then used to form two 'half-knots', just one tail twisted over the other twice:

Note that the knot is fairly loose at this point. However, as the tails are tightened up, they draw the slack out of the knot and ball uo to form a little button that catches or jams into the bight:

Left like this, the two half knot would slip apart, so the knot is secured and finished with a half-hitch, using one of the tails, and catching under the double half-knots:

Here it is all tightened up:

The pressure from the two half-knots locks the half-hitch, which is itself locking the two half-knots. Pretty clever!
What has essentially happened here is that we've made a small button that is holding a bight in place. This is not a super-secure knot; however, I've found it to be remarkably reliable.
In addition to tying up plants, I've used it to secure parcels wrapped with paper. It is so simple and self-tightening, that it becomes a fun one to use. Today I used it to bundle up a few canes that I collected while cleaning up the garden a bit. I'll post that use below.
-
Espalier Knot in use today:
Honestly, Sos24's double constrictor might have been a better choice for this task, but since I had the Espalier knot on my mind, I used it:
Cow hitch (aka Ring Hitch) around a bundle of canes:

Snugged up a bit

The tails used to form two half-knots:

Drawn tight to make a button:

Locking Half-hitch added:

And snugged down (with sister knot shown also):

You can see I trimmed off the excess twine from the tails.
It sounds a bit complicated, but it can be done remarkably quickly once you get the idea and your fingers get a bit of practice.
Hope it proves to be useful to some of you!

-
Ahh fiddle sticks.
the marlin spike hitch was my next one.
I'll be physically doing my next knot tomorrow, and then uploading it the next day - so there's a very good chance that by the time I actually do it, it'll already be taken, or taken between doing it and putting it up!
Hopefully I can think of something obscure enough....
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


