Small tinker appreciation.
-
Question about peoples' experience with the opener layer on the 84mm models.
I realized that all of my opening has been done with 91, 93, and 111mm models. Each one does have a noticeable difference with the bottle opener. Not a bit deal, but I do find that I need a bit of adjustment when I get used to one or the other. I realize I can do an experiment myself, but I would want a good sample size of data points - and I don't want to form such an important opinion when I am drunk with a belly full of fish.
My question is - does anyone have an opinion of the opener on the 84mm models in comparison to the others? Suffice it to say I have done enough opening in my day to have a preference for good performance characteristics for both the bottle and can opener. I would trust that they perform adequately if and when needed. But as an example, I don't like the bottle opener on a LM Micra. Based on that I don't think I would want to use a Rambler bottle opener.....
And so, I wonder if anyone has opinions on the Tinker small or any other in that weight class.
-
@ElevenBlade said:
Question about peoples' experience with the opener layer on the 84mm models.I realized that all of my opening has been done with 91, 93, and 111mm models. Each one does have a noticeable difference with the bottle opener. Not a bit deal, but I do find that I need a bit of adjustment when I get used to one or the other. I realize I can do an experiment myself, but I would want a good sample size of data points - and I don't want to form such an important opinion when I am drunk with a belly full of fish.
My question is - does anyone have an opinion of the opener on the 84mm models in comparison to the others? Suffice it to say I have done enough opening in my day to have a preference for good performance characteristics for both the bottle and can opener. I would trust that they perform adequately if and when needed. But as an example, I don't like the bottle opener on a LM Micra. Based on that I don't think I would want to use a Rambler bottle opener.....
And so, I wonder if anyone has opinions on the Tinker small or any other in that weight class.
The 84mm openers work just fine. They only have a little less leverage than the larger frames. I use them as drivers mostly. Of course they aren't as strong as the 93mm and 111mm ones, yet they can take a surprising amount of torque.
There are untold opinions to be had on the 84mm knives, just about all positive. Have you read the rest of the thread?

I'm a big big fan of the current two layer cellidor models. I don't like going without the openers layer. Lately the Tourist has been my favourite as I like the small blade. The corkscrew is handy as a nail cleaner and knot loosener that also holds the mini SD. The Sportsman is similar if you don't mind going without the small blade. It was my favourite for ages. The Tinker Small is more comfortable to hold than the corkscrew models, but is pipped by the Recruit if you don't use the back tools. The Recruit is also very light. A great knife if again you don't need the back tools. It's also cheap new and very available used for hardly anything, if you live in the States.
Lots of people love the alox 84mm knives. They pocket well and look nice but based on the Voyageur, the only alox 84mm I have, I find them too skinny in the hand.
In my experience the Rambler's bottle opener works pretty well, for such a tiny tool.
I trust you've had a great night and aren't too hungover by the time you read this!

-
I keep a small Tinker in my kitchen on our phone charging station. I've opened a great many cans with it. I don't open any bottles tho. The can opener is just as great IMO as all Vic can openers. The handle is smaller so a slight adjustment to holding it.
-
-
Congrats. Its a great pocket size with lots of capability. -
Are the Phillips drivers the same size on both?
-
I agree the small Tinker is small but takes on big responsibilities I carry it everyday !
@cbl51 said:
I was gifted a small tinker recently. I've had tinker in the past, and I liked it, but I gifted it off to someone who needed it more than me. I've been thinking of getting another SAK, and an 84mm one though. Washington D.C. and federal building regulations limit the size of the knife. My Vic bantam passes, but although I like the bantam, it's lacking a little. The compb tool is a little limiting. So I was ready to pull the trigger on a recruit, when this small tinker comes in the mail.I love it!
Never having had a small tinker, I love the full compliment of tools, but the smaller size makes a difference in dress casual pants and "going downtown." Being a person who likes small pocketknives like Case peanuts and Vic classics. the small tinker fits in with my 'maximum minimalism' theory of operations. I guess being a lifelong light weight backpacker has left an influence on my psyche that runs deep. I always pick the smallest item that will get the job done. Monoculars instead of even compact binoculars, small compact car, compact firearms. I really love the small tinker.
Now if only Victorinox would make a pioneer junior! :D
-
Welcome!I agree. The Small Tinker or Tourist would be fine for an EDC. but for me, over the years I've needed scissors. It's unfortunate that scissors don't come in an 84mm SAK any more. The 85mm SAKs lose a point in my estimation because while they are shorter than a 91mm, they are wider than their 91mm counterpart.
But I might have found a solution to my scissor problem... we'll see.
-
At the risk of taking some fire for asking, can I get a Small Tinker that isn't red? I think the tool set looks fantastic, but after growing up with decades of the "swiss army red", I like my new knives to have a bit of variety to them. At the very least, make it easier to tell them apart!
I just got a Donuts printed full-sized Tinker from SMKW. The printing is really too fragile to EDC, but a small tinker to take with me sounds amazing.
-
@ElevenBlade said:
Welcome!I agree. The Small Tinker or Tourist would be fine for an EDC. but for me, over the years I've needed scissors. It's unfortunate that scissors don't come in an 84mm SAK any more. The 85mm SAKs lose a point in my estimation because while they are shorter than a 91mm, they are wider than their 91mm counterpart.
But I might have found a solution to my scissor problem... we'll see.
You could just by an Evowood and sand each scale down 1.5mm and have virtually the same thing. I'm just happy, after all these years of not having 84mm w/scissors easily available, to have the Delemonts as a viable option.
-
@NutSAK said:
You could just by an Evowood and sand each scale down 1.5mm and have virtually the same thing. I'm just happy, after all these years of not having 84mm w/scissors easily available, to have the Delemonts as a viable option.Well, possibly....
What I wouldnt mind .... An Evo S17 (corkscrew) with the EvoS18 scales (yellow). I haven't seen the yellow grippy scales available for replacement. chunky or not, the yellow evogrop scales look nice, but I'd rather not have the EvoS18 with the phillips. -
@ElevenBlade said:
Welcome!I agree. The Small Tinker or Tourist would be fine for an EDC. but for me, over the years I've needed scissors. It's unfortunate that scissors don't come in an 84mm SAK any more. The 85mm SAKs lose a point in my estimation because while they are shorter than a 91mm, they are wider than their 91mm counterpart.
But I might have found a solution to my scissor problem... we'll see.
It may be the solution you already have in mind, otherwise you may consider adapting Wenger scissors to work in the 84mm frame (fairly easy). 91mm scissors can be used as well but it's a bit more work (requires a backspring modification).
-
@bobartig said:
At the risk of taking some fire for asking, can I get a Small Tinker that isn't red? I think the tool set looks fantastic, but after growing up with decades of the "swiss army red", I like my new knives to have a bit of variety to them. At the very least, make it easier to tell them apart!I just got a Donuts printed full-sized Tinker from SMKW. The printing is really too fragile to EDC, but a small tinker to take with me sounds amazing.
You can get new 84mm red, black, or white scales on ebay. Not a ton of choice but it's something :D
-
So just buy the Red and some replacement scales, and manually mod to White or Black... 🤔 Well, better to know one's options. thanks for this!
-
@bobartig said:
So just buy the Red and some replacement scales, and manually mod to White or Black... 🤔 Well, better to know one's options. thanks for this!That's pretty much what you have to do with most of the 91mm as well, especially if you want colours like yellow or blue, as most are only red or a very small selection of scale options.
If you're careful with removing the scales and use warm water (~70 C) you can reuse the scales (at least once).

I've been reaching for the Tinker Small quite a bit lately. Such a nice carry :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





