Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

Ozark Trail MULTIFORCE - A Leatherman Inspired Multitool

Scheduled Pinned Locked Moved Cheap and Cheerful (or otherwise!)
133 Posts 1 Posters 38.9k Views
  1. Home
  2. Tool Talk
  3. Cheap and Cheerful (or otherwise!)
  4. Ozark Trail MULTIFORCE - A Leatherman Inspired Multitool
Ozark Trail MULTIFORCE - A Leatherman Inspired Multitool
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • pomsbz Offline
    pomsbz
    Posts: 2,595
    pomsbz Offline
    pomsbz
    wrote on last edited by
    #108 Quote Reply

      Is the saw like a LM, i.e. cutting on the reverse cut or dual direction like on a SAK? I've wanted a dual direction on my Charge forever and am wondering about doing a mod.

      "It is better to lose health like a spendthrift than to waste it like a miser." - Robert Louis Stevenson

      Merit Badges
      Outdoor Cook Time Lord Level 1 Time Lord Level 2 Mod User Scale Changer Camping Carabiner User Fire Making Flashlight Titanium Zip Tie User Photographer Hacker SAKMC Traditional Folder Challenge
      1 Reply Last reply
      • ChopperCharles Offline
        ChopperCharles
        Posts: 1,404
        ChopperCharles Offline
        ChopperCharles
        wrote on last edited by
        #109 Quote Reply

          I think you got a bad one. Neither of my Multiforces have any play, the lockup from the liner lock is strong and secure.

          Charles.

          Merit Badges
          Flashlight Hacker Mod User Time Lord Level 1 Fire Making 30 Blades 30 Days
          1 Reply Last reply
          • mikekoz Offline
            mikekoz
            Posts: 637
            mikekoz Offline
            mikekoz
            wrote on last edited by
            #110 Quote Reply

              Don't feel too bad. Years ago I bought an American made knife by Bear and Son that did the same thing and it cost me $80.00. Several times I meant to send it back to B&S but life kept getting in the way! I still have the knife, and it is a beauty, but never got it fixed. It would have no affect on its usability if I ever decided to carry it though. I would suspect your multitool would be the same way. I wish I knew of a way to fix that. If the play was horizontal, I would say adjust the pivot screw, but I am not sure if that would help in this case. I have two of these tools (Walmart Multiforce version) and neither has this problem. Can you send it back to the seller?

              1 Reply Last reply
              • ReamerPunch Offline
                ReamerPunch
                Global Moderators
                Posts: 12,187
                ReamerPunch Offline
                ReamerPunch
                Global Moderators
                wrote on last edited by
                #111 Quote Reply

                  I could remove the scale and try to bend the liner to make it engage as much as it can. Pushing the liner all the way reduces the play a bit.

                  It took a month and a half to get here, so I do not want to wait who knows how long for them to receive it and for me to receive a replacement, and risk a package getting lost on the way. If they would even agree to replace it. Best I can hope for is a partial refund, but I still have not received a refund for the Premium Shipping I paid, and the tool was $24 or something. It could be worse.

                  EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                  Merit Badges
                  Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                  1 Reply Last reply
                  • Happy Gilmore Offline
                    Happy Gilmore
                    Posts: 1,065
                    Happy Gilmore Offline
                    Happy Gilmore
                    wrote on last edited by
                    #112 Quote Reply

                      @TazzieRob said:
                      Oof, that's a lot, for sure! No way to fix it, I assume?

                      I actually had this problem with a leatherman surge where the locking mechanism wasn't cut well..Not sure how to fix it...probably you could exchange it with a new one if you are willing to go through the agony of an exchange.

                      1 Reply Last reply
                      • Graywolf503 Offline
                        Graywolf503
                        Posts: 1
                        Graywolf503 Offline
                        Graywolf503
                        wrote on last edited by
                        #113 Quote Reply

                          Just ordered DEWALT Bit Set with 6-in-1 Flip and Switch Driver System, 7-Piece (DW2336)
                          from Amazon. These bits are the same size as the one in the multiforce but it gives you more bit options. Great for cheaply increasing the number of bit types! Currently $12.99!

                          1 Reply Last reply
                          • Happy Gilmore Offline
                            Happy Gilmore
                            Posts: 1,065
                            Happy Gilmore Offline
                            Happy Gilmore
                            wrote on last edited by Happy Gilmore
                            #114 Quote Reply

                              swiss tech just made a clone. Not having a pocket clip, bit holder...yea..its not nearly as good...

                              1 Reply Last reply
                              • ReamerPunch Offline
                                ReamerPunch
                                Global Moderators
                                Posts: 12,187
                                ReamerPunch Offline
                                ReamerPunch
                                Global Moderators
                                wrote on last edited by
                                #115 Quote Reply

                                  Still, I enjoy the variation. :D

                                  EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                                  Merit Badges
                                  Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                                  1 Reply Last reply
                                  • sloatdog Offline
                                    sloatdog
                                    Posts: 5
                                    sloatdog Offline
                                    sloatdog
                                    wrote on last edited by
                                    #116 Quote Reply

                                      Glad I stumbled across this thread about the OT Multiforce....
                                      happened to be in Bentonville, AR at the Walmart Mothership.
                                      Picked me one up and truly impressed.
                                      THANKS FOR THE RECOMMENDATION

                                      Sent from my iPhone using Tapatalk Pro

                                      1 Reply Last reply
                                      • Jim the Brave Offline
                                        Jim the Brave
                                        Posts: 1,334
                                        Jim the Brave Offline
                                        Jim the Brave
                                        wrote on last edited by
                                        #117 Quote Reply

                                          Not a single one of them available on eBay right now... astounding

                                          This life is merely a staging ground for eternity. Are you preparing for the rest of forever?

                                          Merit Badges
                                          Hook User EDC Pocket Dump Challenge Toothpick User Pen Challenge Axe User Hobo User Chainsaw User 30 Days and 30 SAKs Fire Making
                                          1 Reply Last reply
                                          • PitCarver Offline
                                            PitCarver
                                            Posts: 3,025
                                            PitCarver Offline
                                            PitCarver
                                            wrote on last edited by
                                            #118 Quote Reply

                                              @Jim the Brave said:
                                              Not a single one of them available on eBay right now... astounding

                                              My Walmart still had some in stock after Christmas.

                                              Addicted to sharp pointy things.

                                              Merit Badges
                                              Paracord Scale Changer Camo SAK Traditional Folder Challenge Flashlight Zip Tie User Minimal SAK Challenge 30 day challenge - 58, 65 and 74mm SAKs Fishing Chuck Yeager Challenge 30 day Spartan Challenge Keychain Challenge MiniChamp 30 day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Alox Addict Challenge Hobo User Discontinued SAK/MT Challenge MTo Anniversary Challenge SOG Power Challenge Chainsaw User 30 Day Keychain Pliers Challenge 30 Day Cadet Challenge 20th Anniversary Anything Goes Challenge 30 Day Marlin Spike Challenge 30 Day Barlow Challenge
                                              1 Reply Last reply
                                              • Adam5 Offline
                                                Adam5
                                                Posts: 8,411
                                                Adam5 Offline
                                                Adam5
                                                wrote on last edited by
                                                #119 Quote Reply

                                                  The Walmarts in my area (Raleigh, NC and surrounding towns) have it in stock.

                                                  I made the Multiforce my EDC ever since reading this thread at the beginning of January. I have been very happy with it. I had been carrying a Suspension the past few years and found it to be okay. The Multiforce is a definite step up IMO. I like it so much that I bought a second one recently to have as backup in case I lose the one I carry.

                                                  MT Scissors Comparison & Spreadsheet

                                                  Merit Badges
                                                  Gas Station MRE challenge The SUPER Challenge Hacker Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge Fishing Fire Making PST 30 Day Challenge LM Rebar Challenge Tool Box Challenge The 30 Day MiniTool Challenge 30 Day Combo Edge Challenge LM Crunch 30 day Challenge Off Brand MT Challenge Level 2 Traditional Folder Challenge LM Wave Challenge MTO Rotation Challenge One Piece Collector  30 Day Vintage SAK Challenge LM Surge Challenge Level 3 Case XX 30 Day Challenge Bond 30 Day Challenge
                                                  1 Reply Last reply
                                                  • ReamerPunch Offline
                                                    ReamerPunch
                                                    Global Moderators
                                                    Posts: 12,187
                                                    ReamerPunch Offline
                                                    ReamerPunch
                                                    Global Moderators
                                                    wrote on last edited by
                                                    #120 Quote Reply

                                                      HX Outdoors branded one. Satin and black.




                                                      EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                                                      Merit Badges
                                                      Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                                                      1 Reply Last reply
                                                      • ReamerPunch Offline
                                                        ReamerPunch
                                                        Global Moderators
                                                        Posts: 12,187
                                                        ReamerPunch Offline
                                                        ReamerPunch
                                                        Global Moderators
                                                        wrote on last edited by
                                                        #121 Quote Reply

                                                          Looks like a buyer was not happy.

                                                          Bad finishes and turnstiles that break and does not allow fit, seller shipping in time and shape but is multitool completely defrauded

                                                          EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                                                          Merit Badges
                                                          Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                                                          1 Reply Last reply
                                                          • KP526 Offline
                                                            KP526
                                                            Posts: 7
                                                            KP526 Offline
                                                            KP526
                                                            wrote on last edited by
                                                            #122 Quote Reply

                                                              Just got one from Walmart today! It seems to be perfect except for the plier tips get caught on the inside tools when closing. It doesn’t seem to cause much of an issue besides scrape it a bit. Otherwise it seems to be a perfect backup multitool.

                                                              My Collection: Rebar, Rev, Signal, Swisschamp, EvoS557, SOG PowerAccess :multi:
                                                              I ask a lot of questions ???

                                                              1 Reply Last reply
                                                              • ChopperCharles Offline
                                                                ChopperCharles
                                                                Posts: 1,404
                                                                ChopperCharles Offline
                                                                ChopperCharles
                                                                wrote on last edited by
                                                                #123 Quote Reply

                                                                  Looks like the HX branded one has some cutouts in the scales to make it lighter.

                                                                  Charles.

                                                                  Merit Badges
                                                                  Flashlight Hacker Mod User Time Lord Level 1 Fire Making 30 Blades 30 Days
                                                                  1 Reply Last reply
                                                                  • Happy Gilmore Offline
                                                                    Happy Gilmore
                                                                    Posts: 1,065
                                                                    Happy Gilmore Offline
                                                                    Happy Gilmore
                                                                    wrote on last edited by
                                                                    #124 Quote Reply

                                                                      found a new variant a few days ago. what I like about this one is the added small flat head.

                                                                      tool3.jpg

                                                                      1 Reply Last reply
                                                                      • jdindadell Offline
                                                                        jdindadell
                                                                        Posts: 42
                                                                        jdindadell Offline
                                                                        jdindadell
                                                                        wrote on last edited by
                                                                        #125 Quote Reply

                                                                          Picked up one of these based on the (resonably) glowing reviews. I underestand it is a sub 40 dollar tool, so my expectations were based on that.

                                                                          Straight out of the box the main blade (not the serrated one) was bent, so it was just about impossible to open. In an attempt to straighten it, it broke. Yes, I broke the bade with my hands... To be fair it cracked through the opening hole, which is the weakest area. Must be cast, or hardened too much (not correctly tempered?)

                                                                          Also, the scissors did not work, as the spring portion would slip off the moving side when, thus requiring a manual reset. This happened every time.

                                                                          General fit and finish is mediocre, compared to a 30 dollar gerber suspension nxt (picked that up last week) which may be the best value multi tool I have ever handled.

                                                                          I decided to follow maxlvledc's lead and convert it to a "multi knife"

                                                                          I swapped the serrated blade in the slot the regular blade was in, kept the saw on the opposite side. I plan to put the pocket clip (which was also improperly bent out of the box) onto the saw side as I am right handed and would like the serrated blade to fall under my thumb when removing the knife from my right front pocket.

                                                                          The 3 tools (scissors, flat driver and cap lifter) fit in the pliers slot quite well, however they will need to be slightly re-profiled to work as slip joint tools. I will post some pics when I get a chance to grind them. I bent the scissor spring flat and it works correctly now. Just had to shuffle the washers and all 3 of the tools fit nicely where the pliers head once was.

                                                                          Overall I am quite happy with this tool, although it remains to be seen how durable the cast bit driver is. A forged/machined bit driver would be nice, and a welcome upgrade to the wave/charge/surge series. I know there are some 3d printed parts out there, not sure how I feel about them. I will add some pics when I get home.

                                                                          Still, way better than the gerber armbar, which was a total disappointment due to its non-locking driver.

                                                                          1 Reply Last reply
                                                                          • PitCarver Offline
                                                                            PitCarver
                                                                            Posts: 3,025
                                                                            PitCarver Offline
                                                                            PitCarver
                                                                            wrote on last edited by
                                                                            #126 Quote Reply

                                                                              @jdindadell said:
                                                                              Picked up one of these based on the (resonably) glowing reviews. I underestand it is a sub 40 dollar tool, so my expectations were based on that.

                                                                              Straight out of the box the main blade (not the serrated one) was bent, so it was just about impossible to open. In an attempt to straighten it, it broke. Yes, I broke the bade with my hands... To be fair it cracked through the opening hole, which is the weakest area. Must be cast, or hardened too much (not correctly tempered?)

                                                                              Also, the scissors did not work, as the spring portion would slip off the moving side when, thus requiring a manual reset. This happened every time.

                                                                              General fit and finish is mediocre, compared to a 30 dollar gerber suspension nxt (picked that up last week) which may be the best value multi tool I have ever handled.

                                                                              I decided to follow maxlvledc's lead and convert it to a "multi knife"

                                                                              I swapped the serrated blade in the slot the regular blade was in, kept the saw on the opposite side. I plan to put the pocket clip (which was also improperly bent out of the box) onto the saw side as I am right handed and would like the serrated blade to fall under my thumb when removing the knife from my right front pocket.

                                                                              The 3 tools (scissors, flat driver and cap lifter) fit in the pliers slot quite well, however they will need to be slightly re-profiled to work as slip joint tools. I will post some pics when I get a chance to grind them. I bent the scissor spring flat and it works correctly now. Just had to shuffle the washers and all 3 of the tools fit nicely where the pliers head once was.

                                                                              Overall I am quite happy with this tool, although it remains to be seen how durable the cast bit driver is. A forged/machined bit driver would be nice, and a welcome upgrade to the wave/charge/surge series. I know there are some 3d printed parts out there, not sure how I feel about them. I will add some pics when I get home.

                                                                              Still, way better than the gerber armbar, which was a total disappointment due to its non-locking driver.

                                                                              Which variation did you get, jdindadell, I've actually been quite impressed with the Ozark Trail version.
                                                                              Ps, I like my Gerber too. It's the best value on multitools that I have.

                                                                              Addicted to sharp pointy things.

                                                                              Merit Badges
                                                                              Paracord Scale Changer Camo SAK Traditional Folder Challenge Flashlight Zip Tie User Minimal SAK Challenge 30 day challenge - 58, 65 and 74mm SAKs Fishing Chuck Yeager Challenge 30 day Spartan Challenge Keychain Challenge MiniChamp 30 day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Alox Addict Challenge Hobo User Discontinued SAK/MT Challenge MTo Anniversary Challenge SOG Power Challenge Chainsaw User 30 Day Keychain Pliers Challenge 30 Day Cadet Challenge 20th Anniversary Anything Goes Challenge 30 Day Marlin Spike Challenge 30 Day Barlow Challenge
                                                                              1 Reply Last reply
                                                                              • jdindadell Offline
                                                                                jdindadell
                                                                                Posts: 42
                                                                                jdindadell Offline
                                                                                jdindadell
                                                                                wrote on last edited by
                                                                                #127 Quote Reply

                                                                                  @PitCarver said:
                                                                                  Which variation did you get, jdindadell, I've actually been quite impressed with the Ozark Trail version.
                                                                                  Ps, I like my Gerber too. It's the best value on multitools that I have.

                                                                                  Mine is a Ozark Trail Multiforce that I got directly from Walmart.

                                                                                  The quality and weight (lack of) on the Gerber NXT was quite surprising to me. It is a bit bulky but for the price it is very well finished.

                                                                                  I may re-profile the plier head to use it with a spare set of rebar handles that I have left over from an old wave project. The pivots that interface with the handles need to be flatter, and the pivot enlarged slightly. The plier head seems to be the best made part of the tool.

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 3
                                                                                  • 4
                                                                                  • 5
                                                                                  • 6
                                                                                  • 7
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. Cheap and Cheerful (or otherwise!)
                                                                                  4. Ozark Trail MULTIFORCE - A Leatherman Inspired Multitool
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0