Glass Breakers
-
@Jim the Brave said:
Ok, good deal. So do they really wear out?My Resqme wore out in that the spring broke. But had nothing to do with any usage. Just metal fatigue of some sort and the plastic casing was getting some cracks. Probably due to sun exposure as I kept it as a spare inside the car clipped to the visor.
So best to test it once in a while for replacement. Don’t want to find out in the worst possible way. 😂
-
Good idea.

-
@Aloha said:
I'd agree you should check your window to be certain. I recently test drove a 2021 Rav4 that did not have laminated side windows. I think ( very well may be wrong ) that only the upper trim levels or luxury vehicles will have side laminated glass.Not a lawyer, but to my understanding that should not be. At least not in the US.
Federal Motor Vehicle Safety Standard 226 (FMVSS226) requires that all cars produced/sold (don't know which one) after September 1st 2017 must have laminated side-windows.Unless that has changed again. Or I'm misinformed. Or maybe they have improved tempered glass, so it meets the requirement of FMVSS226.
-
I just received a StatGear GovX rescue knife in a confiscation lot from Las Vegas. I had not been familiar with them either, but this one seems to be in great shape and has a spring-loaded glass breaker. (I tried it out on my wooden desk, works great! :D )
The GovX knife seems to be a very legitimate rescue tool, with 4 hard-core useful features...the main knife blade (liner lock drop point with partial serration), the hook blade belt cutter on a separate fold out blade, also liner locking, the spring-loaded glass breaker, and a functioning led-light, which shines directly inline with the main blade or hook blade when they are deployed. After seeing a number of different low-grade "rescue knives" or knives with rescue functions pass through my hands in the last few months, I'm impressed with the package included on this knife. Since y'all have educated me on the science of glass breakers, I now appreciate the spring-loaded one in this knife. :)
-
Just ordered a second-hand LM Raptor in good shape. Let me break a few glasses and I'm gonna let you know how it performs when they let me outta jail :D
-
@ddogu said:
Just ordered a second-hand LM Raptor in good shape. Let me break a few glasses and I'm gonna let you know how it performs when they let me outta jail :DSounds good.
You might get that old red letter warning: "Warning! This thread has not been active for more than 90 days. Do you really want to reply to it?"
-
@Aloha said:
We've had some discussions on self extracting from a car and with laminated glass you're going to have to be prepared more so. I think a saw or serrated blade could cut the inner material
. I'd want something with length but your first order of business is breaking then puncturing thru the material within.Gloves would be a good idea.
Although laminated side windows were in use while before I retired, we didn't encounter them often. There were a lot of windshield removal techniques (unnecessary IMO but that's another topic). There are specific rescue saws for glass, but an axe also works (small chops, not like a lumberjack).
If you're injured, I don't think you're going to cut your way out with a small saw blade. If you're not injured, check to see if you can put down windows or open doors. Also, you might be able to lie on your back and use both feet kick out broken laminated glass more or less in one piece.
-
@Fireman said:
Although laminated side windows were in use while before I retired, we didn't encounter them often. There were a lot of windshield removal techniques (unnecessary IMO but that's another topic). There are specific rescue saws for glass, but an axe also works (small chops, not like a lumberjack).If you're injured, I don't think you're going to cut your way out with a small saw blade. If you're not injured, check to see if you can put down windows or open doors. Also, you might be able to lie on your back and use both feet kick out broken laminated glass more or less in one piece.
I know one thing that shatters a whole safety glass window instantly..... Try to drill a hole in it with a drill. My dad did that..... "POP" the whole thing disintegrated.
-
Thank you Fireman. I sure wouldn't want to have extract myself.
-
@Jim the Brave said:
I know one thing that shatters a whole safety glass window instantly..... Try to drill a hole in it with a drill. My dad did that..... "POP" the whole thing disintegrated.Drilling a hole for...never mind.
That would do it though. My favorite trick was using the car antenna, if the car had a metal antenna mounted near the windshield. -
@Fireman said:
Drilling a hole for...never mind.
That would do it though. My favorite trick was using the car antenna, if the car had a metal antenna mounted near the windshield.Well to tell the truth, the reason he was trying to drill a hole through it, was to attach a bolt because he was having a hard time getting the glass to stay on the crank riser.
Come to think of it, though, I can think of a few other reasons somebody might want to drill a hole in one.....
-
@Jim the Brave said:
Well to tell the truth, the reason he was trying to drill a hole through it, was to attach a bolt because he was having a hard time getting the glass to stay on the crank riser.Come to think of it, though, I can think of a few other reasons somebody might want to drill a hole in one.....
I'm don't mean to pick on your dad, but I can see it all happening. Patience...patience...POP. It's pretty incredible what they can withstand while fully up in the frame, but that they are relatively easy to break with pressure on a small point.
-
@Fireman said:
I'm don't mean to pick on your dad, but I can see it all happening. Patience...patience...POP. It's pretty incredible what they can withstand while fully up in the frame, but that they are relatively easy to break with pressure on a small point.Yes, it's the nature of the whole thing.
-
A glass breaker isn't really necessary unless your day job is fire/rescue. Any MT with a inline phillips screwdriver can be used to break glass. A needle nosed plier MT might work as well. it's all about focussing all your force on a single point.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
