Compilation of threads with useful info for bladeless SAK mods + related talk!
-
-
Thinking:
New style main blade is 2mm, saw/file is 1.8mm. So in addition to the liner stamp, I also need a 0.2mm washer for it to be perfect.
I can glue a washer made from 0.4mm brass sheet on to a block of wood and sand it down, should be close enough. 
You would have to be careful every single time you close it, to avoid catching the saw/file on the small blade or the next liner. You'd also want to grind a suitable rest on the small blade spacer, and possibly a little bit of the liner next to it. -
Possibly an even better option would be a fish scaler instead.

Its 1.55mm thick, so you need a 0.35mm washer, and 0.4mm should be close enough, so no sanding.
And it would line up nicely with the small blade spacer, so its more... Elegant.
The only work you would have to do is grind/file a rest on the small blade spacer.Of course, this assumes that you want a fish scaler in the first place.

-
-
-
-
Sorry if this has been discussed elsewhere, but do you know where one can find 91mm back scales without the corkscrew/Phillips cutout? I'm planning a bladeless mod (completely removing the blade layer, not by putting another tool in the blade slot) so the cutout would look weird.
-
Unfortunately the 91mm line has not been made with any models that have no corkscrew cut-out.

Only the mini 84mm line and 93mm alox line have variations with no cutouts. (Or no cutouts at all, in the case of the 93mm alox line.)
You can make custom wood/metal scales for the 91mm line though.

-
I believe the scales to be symmetrical so two front scales might be a workaround if you are really intent on going for the red cellidor look. They wouldn't fit to the bushings and would require some drilling to make room for the bushings and then they would still need to be glued in place. But it should be possible...

-
-
Made with spares, no bushings so riveted then epoxied on the scales and back screwdriver had to be filed 1mm to sit flush. Sharpened edges on the can opener so good enough for boxes, and nice to keep on me and not have to worry about losing it.

.jpg)
-
Iโm still cutting my teeth on this forum (pun intended), but I thought this link might be a good addition to your list:
/topic/76301
I especially like multi-tool blade swaps, and the SAKโs blade layer delete mods. Ingenious!

Always good to see pics of what's possible!

@CustomKnifeMods said:
Made with spares, no bushings so riveted then epoxied on the scales and back screwdriver had to be filed 1mm to sit flush. Sharpened edges on the can opener so good enough for boxes, and nice to keep on me and not have to worry about losing it.
Nice minimalist SAK.
I like the idea of using a sharpened can opener on boxes, it's more controlled than a box cutter! -
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better ๐
Register Login
:ahhh 

