Swisstool Spirit X (with clip)
-
Right, so I got my Spirit X from Tim, and here's my review. I'm quite excited about this one because I had been obsessing about it for some time. Not the decision as to whether to buy one, but about how to get a pocket clip on it. I do not have the ability nor tools to perform the excellent mod done by J-Sews, so I had to think of something else.
This something else is the Clipdraw, which I first read about on this forum. This is not so much a review of the Spirit X as it is one of the Clipdraw on one.
First up, the Clipdraw. Here's what I bought

http://www.clipdraw.com/store/index.php?rn=395&action=show_detailThe package is very comprehensive, with even alcohol cleaners to help prepare the surface. Installation was pretty straightforward. Just paste the adhesive onto the mounting plate, cut off excess then position it on the Spirit. Thereafter, just screw on the clip, and you're set. Here are the pictures of my new "clipped" Spirit
View closed

With pliers opened

Put it so it doesn't obstruct when using the blade. But anyway, it's pretty all right gripped in the palm, so even if you are using the file on the other side, there's no issue

Here's a super close up side view. You can see the clip itself isn't that great, curved a bit high. The tape and mounting plate are thick-ish, but that's a small compromise to make. It really isn't that bad when held in the hand. The fact that the colour is very similar makes it not so obvious.

I didn't get it right the first time. I put the Clipdraw below the rivet at first. This was how it looked

This was one of the things I worried about before getting the kit, that it would ride too high because i had to paste it below the rivet. After doing this, I realised that the tape is so thick and strong, it would run over the rivet safely. I pryed out the mounting plate with a screwdriver and the tape came out mostly cleanly. A little wipe with the alcohol swab, and you never knew it was there. Repositioned the clip, and now I'm a happy camper. The tape is incredibly strong. I didn't hang a weight to test it out, but it's safe to say it won't unadhere itself.
So, here's my final assessment of a Clipdraw Spirit X
Pros:
You get a pocket clip (duh)
Easy to install
Secure
Warranty remains (compared to J-sew's mod)Cons:
Tool may feel thicker
Doesn't look seamless like J-sew's mod -
Fine review and mod mate

Let us know how the clip holds up please :)
-
Looks good sir!

Does the adhesive bond well? Any concerns that it might come un-stuck accidentally?
-
Looks good

-
That looks really great.
Please let us know how well it stays in place over time. -
Very cool Silentio
Keep us updated on how it holds up mate 
-
nice job!

-
A little about the adhesive--it's strong. I mentioned I had to remove it once, and getting that done requires you to pry it off. Even then, it wasn't easy. Once you stretch the tape though, the material loses its stickiness. It's almost impossible to stretch the tape while the clip is on though, so I reckon I'm pretty safe.
Clipdraw has an image on its site showing a dumb bell weight hanging on its clip to demonstrate strength. I'm not inclined to try that out, but as far as I'm concerned, the strength of the steel clip itself is the weakest link in this setup. Of course, I've only carried it for 2 days, will report back if I find any signs of weakness. I could have some bias, because if there's one American company I admire more than Leatherman for quality products, it's 3M.
BTW, borrowed a nice camera for a little while, so here's another pic. I couldn't help using my new Spirit X as a test model :D Forgive the griminess, I forgot to wipe it down before shooting :P

-
Nice work! I have heard good things about Clipdraw. Please give us an update in a few months!

-
That's cool!
Yeah, 3M is a great company! I buy 3M products as much as possible!
-
Bandage on the index finger eh. By chance were you bitten by a serrated butter knife? ;)
-
The Spirit X doesn't have the peanut butter blade!
-
I stand corrected!

-
@J-sews said:
Bandage on the index finger eh. By chance were you bitten by a serrated butter knife? ;)I sliced through my nail when peeling potatoes. The tape (made by 3M, incidentally) is there to make sure it doesn't lift and leave my index finger nail-less.
BTW, has anyone found it hard to pull out a tool on the Spirit? I have weak nails I think, find it tough to pull the scissors sometimes.
-
The tool's are more difficult to get out compared to other MT's, but that's because there under spring tension :)
There is a knack to getting them out, usually hooking you little finger under the tool you need (as long as it's not the blade :D) will work :)
-
@Mike, Lord of the Spammers! said:
The tool's are more difficult to get out compared to other MT's, but that's because there under spring tension :)There is a knack to getting them out, usually hooking you little finger under the tool you need (as long as it's not the blade :D) will work :)
That's what I generally do.
-
Man, what's with you people and your weak sissy nails? :D
I actually have to bathe or soak my nails in hot water before I can cut them with anything. Yeah, they're tough. ::)
EDIT: By the way, thanks for doing this. Was gonna do the same myself but decided to hold off until someone slapped one on before me.
-
@One Lame Frog said:
Man, what's with you people and your weak sissy nails? :DI actually have to bathe or soak my nails in hot water before I can cut them with anything. Yeah, they're tough. ::)
EDIT: By the way, thanks for doing this. Was gonna do the same myself but decided to hold off until someone slapped one on before me.
Haha, I fully concede that I have "sissy" nails. I have trouble with the awl on SAKs even sometimes. Let me know how your own clipdraw application turns out.
Thanks, Mike, for the tip on opening.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login