Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

June Pocket Rocket Challenge

Scheduled Pinned Locked Moved Swiss Army Knights Forum
1.8k Posts 1 Posters 61.8k Views
  1. Home
  2. Tool Talk
  3. Swiss Army Knights Forum
  4. June Pocket Rocket Challenge
June Pocket Rocket Challenge
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • ElevenBlade Offline
    ElevenBlade
    Posts: 3,409
    ElevenBlade Offline
    ElevenBlade
    wrote on last edited by
    #1643 Quote Reply

      @Nix said:

      Go on....

      :rofl:

      Merit Badges
      SAK STACK Challenge 30 Days SAKMC Camo SAK Soldier 30 Day Challenge Paracord The Pioneer X Challenge OCD Squad Minimal SAK Challenge 111mm SAK Challenge 30 day challenge - 58, 65 and 74mm SAKs 30 Day Combo Edge Challenge LM Micra Challenge Buck 30 Day Challenge SAK-alike Challenge Black-out EDC 30-Day Challenge
      1 Reply Last reply
      • ElevenBlade Offline
        ElevenBlade
        Posts: 3,409
        ElevenBlade Offline
        ElevenBlade
        wrote on last edited by
        #1644 Quote Reply

          @GearedForwards said:
          Carbide pull throughs hog off way too much metal, partially through people using too much force with them and them being misused. They're marketed as all you need, but it'd be like touching up your edge with 100 grit stones...

          The ceramic pull through on the Vic is pretty incapable of the same kind of hogging since it's fine ceramic, it's more intended as a 'hone' it's actually the sole reason I bought the sharpener. In my misguided youth I sold off my previous system whenever I upgraded, leaving me with only the Wicked Edge and stones topping out at 600 grit. The Vic has so far proved good at rejuvinating a few blades like my dull old Swisscard with a couple dozen swipes of the pass through so I'm fairly happy with it. The stone is good enough, it's just a step beyond honing, ideally you'd strop or use the pull through before letting the edge need the stone.

          Quick aside, so many people are unhappy in Amazon reviews because they expected an easy sharpener and then scratch up or mess up their knives, it's convenient but you still have to know how to actually sharpen to use it, which I think defeats the purpose of the product to some degree (unless they actually include instructions that is).

          Overall pretty happy with it... besides it coming apart immediately and needing an hour of love with a micro drive and straight pin.

          Great info here. I'm currently planning on getting a sharpening system that would do well for Opinel knives, and of course Victorinox as well. Using a carbide pull through I was able to get a nice sharp edge, presumably because there's a full flat grind without a secondary bevel on the Opinel, but you know how rabbit holes can be. Since I was able to get a notable difference, I'm wondering if there are other options besides a) table top systems with clamps or b) a proper set of stones.

          Is Vic the way to go for a pull through sharpener, or are there other good options?

          Merit Badges
          SAK STACK Challenge 30 Days SAKMC Camo SAK Soldier 30 Day Challenge Paracord The Pioneer X Challenge OCD Squad Minimal SAK Challenge 111mm SAK Challenge 30 day challenge - 58, 65 and 74mm SAKs 30 Day Combo Edge Challenge LM Micra Challenge Buck 30 Day Challenge SAK-alike Challenge Black-out EDC 30-Day Challenge
          1 Reply Last reply
          • Nix Offline
            Nix
            Posts: 24,263
            Nix Offline
            Nix
            wrote on last edited by
            #1645 Quote Reply

              @GearedForwards said:
              The ceramic pull through on the Vic is pretty incapable of the same kind of hogging since it's fine ceramic, it's more intended as a 'hone' it's actually the sole reason I bought the sharpener.

              I'd like it better if the ceramic elements were cylindrical rods instead of squared off blocks. I've only used the pull-through feature to really, really lightly de-burr an edge. Again, I run into the difficulty that I use the stone freehand (Meaning I sharpen consistently at an angle of 12-60º on any given stroke. ;) ) but the ceramics are set for a specific angle*.

              I'll try using the stone element a bit more often. Sometimes a stone smoothes out with a bit of use.

              I do like the way the stone and cap can be inserted into the stone's sheath and the sheath used as a handle. Very Vic. Very handy.

              • I have a Spyderco Sharpmaker. I usually take the triangular elements out of the base and use them freehand, too. I guess I don't like having to conform to other people's angles. :rofl:
              Merit Badges
              Hook User ALOX with Scissors ALOX Colors Level 3 The Pioneer X Challenge Camo SAK Birth Year SAK Minimal SAK Challenge Sporkman Paracord LM Rebar Challenge MTO Tool MTo Store User Zip Tie User Victorinox Spirit Challenge EDC Pocket Dump Challenge Santa 111mm SAK Challenge Fire Making OCD Squad Scale Changer Buck 110 Challenge Buck User Mod User 111mm Collector Level 1 SAKMC Fishing SOG Power Challenge Axe User Chuck Yeager Challenge Outdoor Cook LM Wave Challenge The Huntsman Challenge Titanium Mora User SAK STACK Challenge 30 Days Fixed Blade Challenge Toothpick User The SUPER Challenge Hacker Traditional Folder Challenge MTo Anniversary Challenge 30 Day Axe Challenge PST 30 Day Challenge Chili Award Buck 112 Ranger 30 Day Challenge Fieldmaster 30 Day Challenge Victorinox SwissTool Challenge Soldier 30 Day Challenge 30 Blades 30 Days Spyderco 30 Day Challenge The Nessmuk Challenge Skeletool 30 Day Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge Gas Station MRE challenge 30 day challenge - 58, 65 and 74mm SAKs GEC Challenge SAK STACK Challenge 60 Days Delemont 30 Day Challenge Soldier On 90 Day Challenge Pen Challenge
              1 Reply Last reply
              • Nix Offline
                Nix
                Posts: 24,263
                Nix Offline
                Nix
                wrote on last edited by
                #1646 Quote Reply

                  @ElevenBlade said:
                  Is Vic the way to go for a pull through sharpener, or are there other good options?

                  The Spyderco Sharpmaker is a nice tool. :tu:

                  Merit Badges
                  Hook User ALOX with Scissors ALOX Colors Level 3 The Pioneer X Challenge Camo SAK Birth Year SAK Minimal SAK Challenge Sporkman Paracord LM Rebar Challenge MTO Tool MTo Store User Zip Tie User Victorinox Spirit Challenge EDC Pocket Dump Challenge Santa 111mm SAK Challenge Fire Making OCD Squad Scale Changer Buck 110 Challenge Buck User Mod User 111mm Collector Level 1 SAKMC Fishing SOG Power Challenge Axe User Chuck Yeager Challenge Outdoor Cook LM Wave Challenge The Huntsman Challenge Titanium Mora User SAK STACK Challenge 30 Days Fixed Blade Challenge Toothpick User The SUPER Challenge Hacker Traditional Folder Challenge MTo Anniversary Challenge 30 Day Axe Challenge PST 30 Day Challenge Chili Award Buck 112 Ranger 30 Day Challenge Fieldmaster 30 Day Challenge Victorinox SwissTool Challenge Soldier 30 Day Challenge 30 Blades 30 Days Spyderco 30 Day Challenge The Nessmuk Challenge Skeletool 30 Day Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge Gas Station MRE challenge 30 day challenge - 58, 65 and 74mm SAKs GEC Challenge SAK STACK Challenge 60 Days Delemont 30 Day Challenge Soldier On 90 Day Challenge Pen Challenge
                  1 Reply Last reply
                  • cbl51 Offline
                    cbl51
                    Posts: 1,724
                    cbl51 Offline
                    cbl51
                    wrote on last edited by
                    #1647 Quote Reply

                      @ElevenBlade said:
                      Great info here. I'm currently planning on getting a sharpening system that would do well for Opinel knives, and of course Victorinox as well. Using a carbide pull through I was able to get a nice sharp edge, presumably because there's a full flat grind without a secondary bevel on the Opinel, but you know how rabbit holes can be. Since I was able to get a notable difference, I'm wondering if there are other options besides a) table top systems with clamps or b) a proper set of stones.

                      Is Vic the way to go for a pull through sharpener, or are there other good options?

                      I've had great luck with the bottom ring of a coffee mug. A light touch up after breakfast to start the day. Some soup bowls work good too!

                      1 Reply Last reply
                      • ElevenBlade Offline
                        ElevenBlade
                        Posts: 3,409
                        ElevenBlade Offline
                        ElevenBlade
                        wrote on last edited by
                        #1648 Quote Reply

                          @Nix said:
                          The Spyderco Sharpmaker is a nice tool. :tu:

                          When you're as clumsy as me, would you be able to keep the angle steady? Do you just need to keep the blade perpendicular to the base? Is there an advantage to using this over a set of stones? (I'm guessing the answer is yes, and that it's actually easier to maintain a consistent angle) Can it get as sharp as 8000-10,000 grit stones? Am I asking too many questions? :whistle:

                          Merit Badges
                          SAK STACK Challenge 30 Days SAKMC Camo SAK Soldier 30 Day Challenge Paracord The Pioneer X Challenge OCD Squad Minimal SAK Challenge 111mm SAK Challenge 30 day challenge - 58, 65 and 74mm SAKs 30 Day Combo Edge Challenge LM Micra Challenge Buck 30 Day Challenge SAK-alike Challenge Black-out EDC 30-Day Challenge
                          1 Reply Last reply
                          • ElevenBlade Offline
                            ElevenBlade
                            Posts: 3,409
                            ElevenBlade Offline
                            ElevenBlade
                            wrote on last edited by
                            #1649 Quote Reply

                              @cbl51 said:
                              I've had great luck with the bottom ring of a coffee mug. A light touch up after breakfast to start the day. Some soup bowls work good too!

                              Pretty much what I've been doing for the last couple of years :facepalm:

                              Merit Badges
                              SAK STACK Challenge 30 Days SAKMC Camo SAK Soldier 30 Day Challenge Paracord The Pioneer X Challenge OCD Squad Minimal SAK Challenge 111mm SAK Challenge 30 day challenge - 58, 65 and 74mm SAKs 30 Day Combo Edge Challenge LM Micra Challenge Buck 30 Day Challenge SAK-alike Challenge Black-out EDC 30-Day Challenge
                              1 Reply Last reply
                              • Nix Offline
                                Nix
                                Posts: 24,263
                                Nix Offline
                                Nix
                                wrote on last edited by
                                #1650 Quote Reply

                                  @ElevenBlade said:
                                  When you're as clumsy as me, would you be able to keep the angle steady? Do you just need to keep the blade perpendicular to the base? Is there an advantage to using this over a set of stones? (I'm guessing the answer is yes, and that it's actually easier to maintain a consistent angle) Can it get as sharp as 8000-10,000 grit stones? Am I asking too many questions? :whistle:

                                  You've got the idea: blade stays perpendicular to the base and the edge is stroked down the triangular "rods".

                                  I think it is easier to keep a consistent angle with the Sharpmaker than with stones. (Unless, like me, you treat the rods like stones....)

                                  The Sharpmaker comes with two sets of rods medium (grey) and fine (white). To start, use the corners of the grey rods (more aggressive), then the flats. The switch to white rods, corners first, then flats.

                                  I can get a really nice edge using the white rods. Especially if I strop afterwards. Is it a 10K grit edge? I don't think so. I use a 12K stone to finish my straight razor for shaving. I am guessing that Murray Carter could use the white rods to get a shaving edge, but I don't think I could. I have a small pink ceramic stone that I picked up at a woodworking shop. That beauty is extra-fine and puts a super edge on a sharpened knife. I sometimes go from grey to white to pink.

                                  I haven't settled on any one system. I have water stones, diamond plates, Arkansas stones, Sharpmaker, Edgepro, and some ceramic rods. They all work. Even a good coffee cup will work, but definitely strop the edge...on Carl's belt. :rofl:

                                  Merit Badges
                                  Hook User ALOX with Scissors ALOX Colors Level 3 The Pioneer X Challenge Camo SAK Birth Year SAK Minimal SAK Challenge Sporkman Paracord LM Rebar Challenge MTO Tool MTo Store User Zip Tie User Victorinox Spirit Challenge EDC Pocket Dump Challenge Santa 111mm SAK Challenge Fire Making OCD Squad Scale Changer Buck 110 Challenge Buck User Mod User 111mm Collector Level 1 SAKMC Fishing SOG Power Challenge Axe User Chuck Yeager Challenge Outdoor Cook LM Wave Challenge The Huntsman Challenge Titanium Mora User SAK STACK Challenge 30 Days Fixed Blade Challenge Toothpick User The SUPER Challenge Hacker Traditional Folder Challenge MTo Anniversary Challenge 30 Day Axe Challenge PST 30 Day Challenge Chili Award Buck 112 Ranger 30 Day Challenge Fieldmaster 30 Day Challenge Victorinox SwissTool Challenge Soldier 30 Day Challenge 30 Blades 30 Days Spyderco 30 Day Challenge The Nessmuk Challenge Skeletool 30 Day Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge Gas Station MRE challenge 30 day challenge - 58, 65 and 74mm SAKs GEC Challenge SAK STACK Challenge 60 Days Delemont 30 Day Challenge Soldier On 90 Day Challenge Pen Challenge
                                  1 Reply Last reply
                                  • GearedForwards Offline
                                    GearedForwards
                                    Posts: 2,720
                                    GearedForwards Offline
                                    GearedForwards
                                    wrote on last edited by
                                    #1651 Quote Reply

                                      @ElevenBlade said:
                                      Great info here. I'm currently planning on getting a sharpening system that would do well for Opinel knives, and of course Victorinox as well. Using a carbide pull through I was able to get a nice sharp edge, presumably because there's a full flat grind without a secondary bevel on the Opinel, but you know how rabbit holes can be. Since I was able to get a notable difference, I'm wondering if there are other options besides a) table top systems with clamps or b) a proper set of stones.

                                      Is Vic the way to go for a pull through sharpener, or are there other good options?

                                      If you want to just use a pull through then I'd just get the Vic dual sharpener and make sure you keep on top of your edges, which is pretty easy to do since they made it as portable as a sharpie.

                                      If you want a beginner/intermediate system then the rod systems are where you want to go. The angle is set by the rods, most systems give you at least two different angles to choose from and pack down self contained.

                                      The Sharpmaker is great and was my last system (I regret selling it tbh, I should have kept it to keep my sharpening options more rounded), but if you're unsure what you want and don't want to drop a lot of money to test it then I recommend getting the Lansky Turnbox. It's the same principle as the Sharpmaker but less bells and whistles:

                                      -Two set angles

                                      -Coarse and fine ceramics

                                      -Packs down into the small block of wood that actually makes it a system. It's literally 6 holes drilled into a block of wood.

                                      As for the Sharpmaker, Spyderco does make higher grit rods that will fit it if you really want, they're not the cheapest of things though.

                                      Merit Badges
                                      14th Anniversary Anything Goes Challenge Spyderco 30 Day Challenge Minimal SAK Challenge Poker Face Challenge 30 Day Weight-loss Challenge The Batman 30 Day Challenge Titanium Fire Making 30 day challenge - 58, 65 and 74mm SAKs Toothpick User Scale Changer Delemont 30 Day Challenge Paracord Gas Station MRE challenge
                                      1 Reply Last reply
                                      • GearedForwards Offline
                                        GearedForwards
                                        Posts: 2,720
                                        GearedForwards Offline
                                        GearedForwards
                                        wrote on last edited by
                                        #1652 Quote Reply

                                          @Nix said:
                                          You've got the idea: blade stays perpendicular to the base and the edge is stroked down the triangular "rods".

                                          I think it is easier to keep a consistent angle with the Sharpmaker than with stones. (Unless, like me, you treat the rods like stones....)

                                          The Sharpmaker comes with two sets of rods medium (grey) and fine (white). To start, use the corners of the grey rods (more aggressive), then the flats. The switch to white rods, corners first, then flats.

                                          I can get a really nice edge using the white rods. Especially if I strop afterwards. Is it a 10K grit edge? I don't think so. I use a 12K stone to finish my straight razor for shaving. I am guessing that Murray Carter could use the white rods to get a shaving edge, but I don't think I could. I have a small pink ceramic stone that I picked up at a woodworking shop. That beauty is extra-fine and puts a super edge on a sharpened knife. I sometimes go from grey to white to pink.

                                          I haven't settled on any one system. I have water stones, diamond plates, Arkansas stones, Sharpmaker, Edgepro, and some ceramic rods. They all work. Even a good coffee cup will work, but definitely strop the edge...on Carl's belt. :rofl:

                                          Do... do you at least put the rods flat in the sharpmaker like they intend or do you Nix that approach too? :facepalm:

                                          When are you going to go whole hog and get a Wicked Edge 3.0? We know you still have the storage space :pok:

                                          I got my first real strop (well piece of leather dedicated to the purpose) recently with my whittling starter kit, but for the life of me not sure how to cleanly spread the green compund it came with, it's really hard at room temp, do I need to heat it up? :think:

                                          Hopefully it'll do better than a belt does :dunno:

                                          Merit Badges
                                          14th Anniversary Anything Goes Challenge Spyderco 30 Day Challenge Minimal SAK Challenge Poker Face Challenge 30 Day Weight-loss Challenge The Batman 30 Day Challenge Titanium Fire Making 30 day challenge - 58, 65 and 74mm SAKs Toothpick User Scale Changer Delemont 30 Day Challenge Paracord Gas Station MRE challenge
                                          1 Reply Last reply
                                          • SteveP Offline
                                            SteveP
                                            Posts: 1,321
                                            SteveP Offline
                                            SteveP
                                            wrote on last edited by
                                            #1653 Quote Reply

                                              Great info everyone, thank you.

                                              Maybe more in-depth than I'm ready for at this point though. :(

                                              Seems I read somewhere that the pull-through on the Vic sharpener is angled specifically at 20 degrees, the standard angle for SAKs. (Which coincidentally is the angle from the thickness of the nub on the toothpick, according to NikGyver. So it can be used to get the correct angle when free-handing.)

                                              For now I'll stick with the Vic sharpener and stay on top of blade maintenance. Should I pick up a used SAK in way bad shape, then I might try some of that in-depth info!

                                              Merit Badges
                                              Hacker Mod User Scale Changer 30 day challenge - 58, 65 and 74mm SAKs Duct Tape Flashlight Toothpick User Daredevil challenge Scaler User SAK STACK Challenge 30 Days Modified SAK Challenge 30 Days and 30 SAKs Discontinued SAK/MT Challenge Explorer 30 Day Challenge MacGyver 30 Day Challenge
                                              1 Reply Last reply
                                              • GearedForwards Offline
                                                GearedForwards
                                                Posts: 2,720
                                                GearedForwards Offline
                                                GearedForwards
                                                wrote on last edited by
                                                #1654 Quote Reply

                                                  @SteveP said:
                                                  Great info everyone, thank you.

                                                  Maybe more in-depth than I'm ready for at this point though. :(

                                                  Seems I read somewhere that the pull-through on the Vic sharpener is angled specifically at 20 degrees, the standard angle for SAKs. (Which coincidentally is the angle from the thickness of the nub on the toothpick, according to NikGyver. So it can be used to get the correct angle when free-handing.)

                                                  For now I'll stick with the Vic sharpener and stay on top of blade maintenance. Should I pick up a used SAK in way bad shape, then I might try some of that in-depth info!

                                                  Prevention is usually better than cure!

                                                  ...until you fall deep enough you just want the sharpening stuff to have it. One of us. One of us. :pok:

                                                  Merit Badges
                                                  14th Anniversary Anything Goes Challenge Spyderco 30 Day Challenge Minimal SAK Challenge Poker Face Challenge 30 Day Weight-loss Challenge The Batman 30 Day Challenge Titanium Fire Making 30 day challenge - 58, 65 and 74mm SAKs Toothpick User Scale Changer Delemont 30 Day Challenge Paracord Gas Station MRE challenge
                                                  1 Reply Last reply
                                                  • Nix Offline
                                                    Nix
                                                    Posts: 24,263
                                                    Nix Offline
                                                    Nix
                                                    wrote on last edited by
                                                    #1655 Quote Reply

                                                      @GearedForwards said:
                                                      Do... do you at least put the rods flat in the sharpmaker like they intend or do you Nix that approach too? :facepalm:

                                                      When are you going to go whole hog and get a Wicked Edge 3.0? We know you still have the storage space :pok:

                                                      I got my first real strop (well piece of leather dedicated to the purpose) recently with my whittling starter kit, but for the life of me not sure how to cleanly spread the green compund it came with, it's really hard at room temp, do I need to heat it up? :think:

                                                      Hopefully it'll do better than a belt does :dunno:

                                                      :rofl:

                                                      Uhhhh....I don't see how the base would support a flat rod. My Sharpmaker is really old. It is possible that newer versions have that option. I just jam a rod between my outstretched thumb and middle finger of my left hand. The knife to be sharpened goes in my right. Somehow it all works out.

                                                      The Wicked Edge looks very good, but not nearly as much fun as freehanding. And those mechanical sharpeners always take a bit of time to set up. It is so much easier to pull out a stone and touch up an edge. It is hard to argue against devices like the Wicked Edge, but I encourage people to become comfortable with freehand sharpening. It is easy to carry a small stone while you are out on a trip. Vic's are not known for great edge holding, but if you have a small stone it is easy to touch up an edge. Which is why I got the Vic sharpener in the first place.

                                                      I really like the Sharpmaker, but I can't recall when I last used the base...... :dunno:

                                                      With stropping compound, I have tried heating the compound first. I find it goes on too thickly.

                                                      Now I don't worry about getting an even coating of compound on the strop. I just rub the cold, hard compound over the surface in a couple directions. I rub it on without a lot of pressure, but I think the friction of rubbing it on still heats it enough to get it to stick to the strop.

                                                      As I strop the blade, the compound gets worked over the surface (to an extent). I think it is better to have too little compound on the strop rather than too much. I am a devoted stropping practitioner, but I'm sure there are some tips and tricks I could learn.

                                                      My thoughts on stropping as of this date:

                                                      • Top grain leather is better than the split side (balsa wood, thin cardboard, and thick paper can serve, too).
                                                      • A rigid strop (as compared to an old barber's belt strop) is best.
                                                      • Use a light amount of compound. If it builds up, remove it with steel wool or a scraper.
                                                      • Strop enough, but not too much. Over-stropping is a thing.
                                                      • Use a low angle to strop. A high angle can dull the edge, especially if you end up chasing an edge while over-stropping. If the low angle isn't doing the job, raise it slowly.....
                                                      • Green compound is great, the others (black and pink) are not needed (with possible exception of shaving razor)
                                                      • Slow and steady strokes seem to work best for me. Some gys like speedy stropping, but I haven't seen an advantage with that.

                                                      Merit Badges
                                                      Hook User ALOX with Scissors ALOX Colors Level 3 The Pioneer X Challenge Camo SAK Birth Year SAK Minimal SAK Challenge Sporkman Paracord LM Rebar Challenge MTO Tool MTo Store User Zip Tie User Victorinox Spirit Challenge EDC Pocket Dump Challenge Santa 111mm SAK Challenge Fire Making OCD Squad Scale Changer Buck 110 Challenge Buck User Mod User 111mm Collector Level 1 SAKMC Fishing SOG Power Challenge Axe User Chuck Yeager Challenge Outdoor Cook LM Wave Challenge The Huntsman Challenge Titanium Mora User SAK STACK Challenge 30 Days Fixed Blade Challenge Toothpick User The SUPER Challenge Hacker Traditional Folder Challenge MTo Anniversary Challenge 30 Day Axe Challenge PST 30 Day Challenge Chili Award Buck 112 Ranger 30 Day Challenge Fieldmaster 30 Day Challenge Victorinox SwissTool Challenge Soldier 30 Day Challenge 30 Blades 30 Days Spyderco 30 Day Challenge The Nessmuk Challenge Skeletool 30 Day Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge Gas Station MRE challenge 30 day challenge - 58, 65 and 74mm SAKs GEC Challenge SAK STACK Challenge 60 Days Delemont 30 Day Challenge Soldier On 90 Day Challenge Pen Challenge
                                                      1 Reply Last reply
                                                      • Nix Offline
                                                        Nix
                                                        Posts: 24,263
                                                        Nix Offline
                                                        Nix
                                                        wrote on last edited by
                                                        #1656 Quote Reply

                                                          Also: I love the Sharpmaker's rods for honing serrated blades. Simple scalloped serrations (Like Vic's or most kitchen knives) can be sharpened easily with the Sharpmaker's rods angled to use the corners. :tu:

                                                          Merit Badges
                                                          Hook User ALOX with Scissors ALOX Colors Level 3 The Pioneer X Challenge Camo SAK Birth Year SAK Minimal SAK Challenge Sporkman Paracord LM Rebar Challenge MTO Tool MTo Store User Zip Tie User Victorinox Spirit Challenge EDC Pocket Dump Challenge Santa 111mm SAK Challenge Fire Making OCD Squad Scale Changer Buck 110 Challenge Buck User Mod User 111mm Collector Level 1 SAKMC Fishing SOG Power Challenge Axe User Chuck Yeager Challenge Outdoor Cook LM Wave Challenge The Huntsman Challenge Titanium Mora User SAK STACK Challenge 30 Days Fixed Blade Challenge Toothpick User The SUPER Challenge Hacker Traditional Folder Challenge MTo Anniversary Challenge 30 Day Axe Challenge PST 30 Day Challenge Chili Award Buck 112 Ranger 30 Day Challenge Fieldmaster 30 Day Challenge Victorinox SwissTool Challenge Soldier 30 Day Challenge 30 Blades 30 Days Spyderco 30 Day Challenge The Nessmuk Challenge Skeletool 30 Day Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge Gas Station MRE challenge 30 day challenge - 58, 65 and 74mm SAKs GEC Challenge SAK STACK Challenge 60 Days Delemont 30 Day Challenge Soldier On 90 Day Challenge Pen Challenge
                                                          1 Reply Last reply
                                                          • Sos24 Offline
                                                            Sos24
                                                            Global Moderators
                                                            Posts: 11,507
                                                            Sos24 Offline
                                                            Sos24
                                                            Global Moderators
                                                            wrote on last edited by
                                                            #1657 Quote Reply

                                                              Day 29
                                                              The Ambassador got a needed cleaning and sharpening after cutting tape, velcro with adhesive and aluminum foil.

                                                              Merit Badges
                                                              Paracord Flashlight Mod User Toothpick User Scale Changer The Pioneer X Challenge One Piece Collector Traditional Folder Challenge MTo Anniversary Challenge Hook User Titanium Carabiner User Modified SAK Challenge Explorer 30 Day Challenge Gun User LM Crunch 30 day Challenge Discontinued SAK/MT Challenge Buck 112 Ranger 30 Day Challenge Fieldmaster 30 Day Challenge Victorinox Spirit Challenge SAK STACK Challenge 30 Days 30 Blades 30 Days 14th Anniversary Anything Goes Challenge Spyderco 30 Day Challenge Skeletool 30 Day Challenge Minimal SAK Challenge 30 day EDC Challenge 111mm SAK Challenge Poker Face Challenge Farmer X Challenge SAKMC Fire Making 30 Day Bladeless Challenge Gas Station MRE challenge GEC Challenge 30 day challenge - 58, 65 and 74mm SAKs Daredevil challenge SAK-alike Challenge 30 Day Combo Edge Challenge Loaded Pockets 30 Day Challenge Santa Chuck Yeager Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Case XX 30 Day Challenge LM Micra Challenge 30 Day Flashlight Challenge LM Signal Challenge 30 Day Fire starting Challenge Buck 30 Day Challenge 30 Day Modular Tool Challenge MacGyver 30 Day Challenge Black-out EDC 30-Day Challenge 30 Day Keychain Pliers Challenge 30 Day Magnifying Glass Challenge 20th Anniversary Anything Goes Challenge
                                                              1 Reply Last reply
                                                              • Hevy (CT-782) Offline
                                                                Hevy (CT-782)
                                                                Posts: 1,837
                                                                Hevy (CT-782) Offline
                                                                Hevy (CT-782)
                                                                wrote on last edited by
                                                                #1658 Quote Reply

                                                                  Day 29, Very late post...

                                                                  Today I took some notes using wife's Victorinox Signature

                                                                  Enviado de meu moto g(6) usando o Tapatalk

                                                                  Merit Badges
                                                                  SAKMC Discontinued SAK/MT Challenge Soldier On 90 Day Challenge
                                                                  1 Reply Last reply
                                                                  • GearedForwards Offline
                                                                    GearedForwards
                                                                    Posts: 2,720
                                                                    GearedForwards Offline
                                                                    GearedForwards
                                                                    wrote on last edited by
                                                                    #1659 Quote Reply

                                                                      @Nix said:
                                                                      :rofl:

                                                                      Uhhhh....I don't see how the base would support a flat rod. My Sharpmaker is really old. It is possible that newer versions have that option. I just jam a rod between my outstretched thumb and middle finger of my left hand. The knife to be sharpened goes in my right. Somehow it all works out.

                                                                      The Wicked Edge looks very good, but not nearly as much fun as freehanding. And those mechanical sharpeners always take a bit of time to set up. It is so much easier to pull out a stone and touch up an edge. It is hard to argue against devices like the Wicked Edge, but I encourage people to become comfortable with freehand sharpening. It is easy to carry a small stone while you are out on a trip. Vic's are not known for great edge holding, but if you have a small stone it is easy to touch up an edge. Which is why I got the Vic sharpener in the first place.

                                                                      I really like the Sharpmaker, but I can't recall when I last used the base...... :dunno:

                                                                      With stropping compound, I have tried heating the compound first. I find it goes on too thickly.

                                                                      Now I don't worry about getting an even coating of compound on the strop. I just rub the cold, hard compound over the surface in a couple directions. I rub it on without a lot of pressure, but I think the friction of rubbing it on still heats it enough to get it to stick to the strop.

                                                                      As I strop the blade, the compound gets worked over the surface (to an extent). I think it is better to have too little compound on the strop rather than too much. I am a devoted stropping practitioner, but I'm sure there are some tips and tricks I could learn.

                                                                      My thoughts on stropping as of this date:

                                                                      • Top grain leather is better than the split side (balsa wood, thin cardboard, and thick paper can serve, too).
                                                                      • A rigid strop (as compared to an old barber's belt strop) is best.
                                                                      • Use a light amount of compound. If it builds up, remove it with steel wool or a scraper.
                                                                      • Strop enough, but not too much. Over-stropping is a thing.
                                                                      • Use a low angle to strop. A high angle can dull the edge, especially if you end up chasing an edge while over-stropping. If the low angle isn't doing the job, raise it slowly.....
                                                                      • Green compound is great, the others (black and pink) are not needed (with possible exception of shaving razor)
                                                                      • Slow and steady strokes seem to work best for me. Some gys like speedy stropping, but I haven't seen an advantage with that.

                                                                      How old is... really old? I got mine something like 2013 I think? :think:

                                                                      You just turn the base over, the bottom accomdates the rods so you can use them as freehand stones:

                                                                      I really like my Wicked Edge, I could do with higher grit stones, but I really want to upgrade to the 3.0 at some point, probably after an eventual move :whistle:

                                                                      I have only really stropped on the raw side of a belt or the heel of my hand (does okay actually).

                                                                      Great tips though thanks! I looked at the DC4 combo stone recently, the leather pouch doubling as a strop was always a nice feature that appealed. Those sharpening cards (the one you carry in your wallet) are also nice but just too pricey over here to justify it since I don't really go anywhere to be away from my stuff anyway :facepalm:

                                                                      Merit Badges
                                                                      14th Anniversary Anything Goes Challenge Spyderco 30 Day Challenge Minimal SAK Challenge Poker Face Challenge 30 Day Weight-loss Challenge The Batman 30 Day Challenge Titanium Fire Making 30 day challenge - 58, 65 and 74mm SAKs Toothpick User Scale Changer Delemont 30 Day Challenge Paracord Gas Station MRE challenge
                                                                      1 Reply Last reply
                                                                      • Nix Offline
                                                                        Nix
                                                                        Posts: 24,263
                                                                        Nix Offline
                                                                        Nix
                                                                        wrote on last edited by
                                                                        #1660 Quote Reply

                                                                          @GearedForwards said:
                                                                          How old is... really old? I got mine something like 2013 I think? :think:

                                                                          You just turn the base over, the bottom accomdates the rods so you can use them as freehand stones:

                                                                          I think I got my Sharpmaker when the band R.E.M. was topping the charts and quiche was still popular. My base is just a chunk of plastic with holes in it. The underside is flat...sort of. Sal Glesser probably made it himself...in his garage...

                                                                          I think it came with some brass rods that served as a guard....not sure where those went. :think:

                                                                          Still works, though. :D

                                                                          Merit Badges
                                                                          Hook User ALOX with Scissors ALOX Colors Level 3 The Pioneer X Challenge Camo SAK Birth Year SAK Minimal SAK Challenge Sporkman Paracord LM Rebar Challenge MTO Tool MTo Store User Zip Tie User Victorinox Spirit Challenge EDC Pocket Dump Challenge Santa 111mm SAK Challenge Fire Making OCD Squad Scale Changer Buck 110 Challenge Buck User Mod User 111mm Collector Level 1 SAKMC Fishing SOG Power Challenge Axe User Chuck Yeager Challenge Outdoor Cook LM Wave Challenge The Huntsman Challenge Titanium Mora User SAK STACK Challenge 30 Days Fixed Blade Challenge Toothpick User The SUPER Challenge Hacker Traditional Folder Challenge MTo Anniversary Challenge 30 Day Axe Challenge PST 30 Day Challenge Chili Award Buck 112 Ranger 30 Day Challenge Fieldmaster 30 Day Challenge Victorinox SwissTool Challenge Soldier 30 Day Challenge 30 Blades 30 Days Spyderco 30 Day Challenge The Nessmuk Challenge Skeletool 30 Day Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge Gas Station MRE challenge 30 day challenge - 58, 65 and 74mm SAKs GEC Challenge SAK STACK Challenge 60 Days Delemont 30 Day Challenge Soldier On 90 Day Challenge Pen Challenge
                                                                          1 Reply Last reply
                                                                          • GearedForwards Offline
                                                                            GearedForwards
                                                                            Posts: 2,720
                                                                            GearedForwards Offline
                                                                            GearedForwards
                                                                            wrote on last edited by
                                                                            #1661 Quote Reply

                                                                              @Nix said:
                                                                              I think I got my Sharpmaker when the band R.E.M. was topping the charts and quiche was still popular. My base is just a chunk of plastic with holes in it. The underside is flat...sort of. Sal Glesser probably made it himself...in his garage...

                                                                              I think it came with some brass rods that served as a guard....not sure where those went. :think:

                                                                              Still works, though. :D

                                                                              Does it work if you're not actually using it? :think:

                                                                              Merit Badges
                                                                              14th Anniversary Anything Goes Challenge Spyderco 30 Day Challenge Minimal SAK Challenge Poker Face Challenge 30 Day Weight-loss Challenge The Batman 30 Day Challenge Titanium Fire Making 30 day challenge - 58, 65 and 74mm SAKs Toothpick User Scale Changer Delemont 30 Day Challenge Paracord Gas Station MRE challenge
                                                                              1 Reply Last reply
                                                                              • GearedForwards Offline
                                                                                GearedForwards
                                                                                Posts: 2,720
                                                                                GearedForwards Offline
                                                                                GearedForwards
                                                                                wrote on last edited by
                                                                                #1662 Quote Reply

                                                                                  Day 29

                                                                                  Not much work for the Executive today, itching to get back to the full variety now I've gotten back into EDC channels.

                                                                                  Today's picture is a test of a set up I'd use to record YT videos, I've been wanting to start an EDC channel for a long time. What do you guys think of the lighting and backdrop? :dwts:

                                                                                  Merit Badges
                                                                                  14th Anniversary Anything Goes Challenge Spyderco 30 Day Challenge Minimal SAK Challenge Poker Face Challenge 30 Day Weight-loss Challenge The Batman 30 Day Challenge Titanium Fire Making 30 day challenge - 58, 65 and 74mm SAKs Toothpick User Scale Changer Delemont 30 Day Challenge Paracord Gas Station MRE challenge
                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 81
                                                                                  • 82
                                                                                  • 83
                                                                                  • 84
                                                                                  • 85
                                                                                  • 89
                                                                                  • 90
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. Swiss Army Knights Forum
                                                                                  4. June Pocket Rocket Challenge
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0