Curl Owners Club
-
@roamingcat said:
Thanks for the ideas gents ! I have a first gen Wave and I am quite happy to swap over the saw to my Curl. As I haven't taken apart a full size LM multitool yet, any advice/ tips/ what to watchout for would be appreciated. More concerned how to put it back together, especially with the locking mechanism on one end and slip joint spring on the other.If all you're doing is putting a saw in, I think you just need to yank the pivot out and make the tool swap. It should be as simple as maintaining any locking folding knife, just be aware that they use security bit Torx.
-
Assuming you already have a pair of Torx T10 security bits, make sure that you have some loc-tite.
You shouldn't have to take the whole Wave apart to remove the saw.
Removing the saw from a Wave is pretty easy, since the male half of the pivot screw threads into the saw side of pivot pin. So all you have to do is unscrew the pivot screw on the saw side and slide the saw off of the pivot. You shouldn't have to remove the entire pivot pin to take the saw off. Be sure to save the bronze washer that's between the saw and the frame.
Note: You might have to pull the whole pivot pin out to remove the saw, but it all depends on which side the pivot screw threads into. It works equally well either way, and I've dissembled and reassembled my Wave so many times that I'm not sure of the original orientation of the pivot.
Removing the file from the Curl is exactly the same (I'm assuming this, based on the visual similarity of the tools and their use of standard Wave parts).
-
Appreciate the advices gentlemen, thanks
. Sounds like a less daunting task then I first thought :). Thats my next project for the weekend. You all have a great weekend ahead! -
I cringe at the thought of replacing the file with a saw, but different strokes for different folks :)
Please post some pics when you're done.
-
Just ordered mine! $65.02 thanks to the coupon code from Poncho!
-
-
@roamingcat said:
Thanks for the ideas gents ! I have a first gen Wave and I am quite happy to swap over the saw to my Curl. As I haven't taken apart a full size LM multitool yet, any advice/ tips/ what to watchout for would be appreciated. More concerned how to put it back together, especially with the locking mechanism on one end and slip joint spring on the other.As already mentioned you donβt need to take it all apart, just the screw that holds the bit you want to take out. Did a video a while back taking apart my Surge, it will give you an idea what to expect. Nothing to be afraid of.
https://youtu.be/e2Mtq5y-KKMa -
D*mn you Poncho65!!

I've been such a good boy lately, but I can't pass up the curl at $65 shipped.

Also, I will never judge women for having 50 pairs of shoes we are all just as sick.
-
@DavisNikolov said:
As already mentioned you donβt need to take it all apart, just the screw that holds the bit you want to take out. Did a video a while back taking apart my Surge, it will give you an idea what to expect. Nothing to be afraid of.
https://youtu.be/e2Mtq5y-KKMaThank you.

-
Glad to help you all

I am in the same boat by ordering mine as well though

-
-
@hsherzfeld said:
As you say, different strokes for different folks. I use my Wave's saw probably 5x more often than the file. I'm already planning the mod.π€’
-
@Poncho65 said:
I use a file (especially a diamond file) way more than a saw and am glad to have a tool coming with this toolset


My first post here was asking about modding my Wingman to replace the scissors with a file, so I'm with ya! I even purchased a Wave file from eBay, and now I have no reason to mod or even use my Wingman anymore :(
-
Keep the Wingman as is because it will probably be discontinued soon if it isn't already
and the prices of them will go up :ahhh -
And a plain edge blade
:D -
@hsherzfeld said:
But it has a saw! :ahhhMore importantly, I don't have one yet π
-
The Sidekick is a good multitool. It was my first Leatherman, way back in 2012 when I was a junior in high school (and the Sidekick was only $30! :ahhh). It's not an entry-level Leatherman anymore, now that the price has basically doubled. >:(
I loved the spring-loaded pliers.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better π
Register Login
