Leatherman SIDEKICK / WINGMAN Owners Club
-
-
@Gareth said:
I've never tried but looking at them side by side they actually might.I've never much liked the sprung head in the Sidekick so this sounds like a great idea.

Thanks Gareth!
I like the load of the Wingman it’s just that the pliers don’t really work for me — the don’t seem to want to cut into anything properly. I found this old wave/charge plierhead and was thinking if it would be feasible to bring some fresh air into the Wingman.
For some strange reason, assembling something to resemble a Curl is cheaper here than actually buying a Curl on retail.
-
-
Thanks guys

-
@Zephon said:
Would a Wingman be able to take in the plier head of a wave/charge v1?Only problem I see is that the holes for the barrel screws are the same on both ends of the Wingman/SideKick platform but the Wave/Charge ones are larger on the plier head end than the other end
Might fill the plier head holes in with a softer metal and then redrill them to have a smaller diameter hole that would take the screws of the Wingman without a wobble 
-
-

I have no idea how this happened while I was opening the tool.

-
@Poncho65 said:
Only problem I see is that the holes for the barrel screws are the same on both ends of the Wingman/SideKick platform but the Wave/Charge ones are larger on the plier head end than the other end
Might fill the plier head holes in with a softer metal and then redrill them to have a smaller diameter hole that would take the screws of the Wingman without a wobble 
Thanks for the words of caution. All the while I thought it was just a drop-in.
-
-
-
This was a good platform and it's sad Leatherman went in the opposite direction cutting and removing features(Rev/Bolster) when if they would have expanded on this platform they could have something really fantastic for EDC.
-
@Poncho65 said:
:ahhh :ahhh :ahhhNo idea either ??? :ahhh Guess you have to take it apart to fix that? :o
Managed to untangle it without disassembly. Surprisingly the key was something like an odd angle of the opposite plier pivot- not the stuck one. I swear it was crazy! Good thing it happened at home and not in the field.
-
Glad you were able to fix it

-
Fresh off the table. I haven’t even had the chance to wipe clean the tools I used.
How I wish I can come across a plier head that I can simply drop into the Wingman.
Anyway, the mod here isn’t 100% perfect. A <1mm portion of the tip of the bit holder comes in contact with <1mm of the plier tip.
I think this gives extra value to the Wingman. Yeah, it adds a little extra cost since I bought the bit holder separately. Wish I had an awl to add on to this. I honestly don’t have the tools to grind something into an awl.
I’m doing the Rebar challenge now so I can’t comment on how this tool holds up. I’ll probably give feedback next month.
Edit: as it is, all in all, this Wingman with bit driver still costs half of what a Curl costs down here. And all I’m missing is an awl….
Edit 2: I can easily replace the PE blade with the saw and now I’ll have a bladeless Wingman.


-
Excellent bit of mod work, Zephon

-
Is there a difference between the pliers on a Rev and a Wingman/Sidekick? My Wingman pliers can’t cut anything right so I’m thinking of dropping in anything that would fit right away.
It can’t be that hard, right?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

