Shop projects
-
This would be a fun project
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
@SteveC said:
This would be a fun project- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Pretty cool. Btw hello Steve

Although I would not have made it a flat bottom boat. -
@tattoosteve99 said:
Pretty cool. Btw hello Steve

Although I would not have made it a flat bottom boat.
-
@SteveC said:
This would be a fun project- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Well, have you started yet?

-
@tattoosteve99 said:
Although I would not have made it a flat bottom boat.Flat-bottom hulls, they make the rockin' boats go 'round...
::)
-
Due to some unfortunate purchasing of a TV walls setup we ended up with on made for buildings with a smaller distance between the joist in the wall. Thus it needs to be fastened to something than spans wide enough to hang it up. I thought that would be a nice little project to test a new toy I got some time ago on sale, and maybe add some pictures here in the process.
So I started with a leftover piece of 3mm steel sheet that happened to be suitable wide but too long. So it had to be cut, and I get to try my new toy.
-
So the new little toy is a, eh, something, that mounts on the angle grinder. It serves three purposes - gather dust via the vacuum coupling, having a straight edge to follow for straight cuts, and a cut depth setting. I try to avoid doing much inside that spreads dust in general, and metal dust in particular, so this is a nice little addition. It worked very well - very little escaped from that test cut.
-
After that I got to try another new addition, a small 125mm angle grinder, to just clean up all the edges and round the corners. Note the narrow grip compared to the other angle grinder - this one is very easy to grip.
-
The old steel sheet had a lot of character and rusty patina. It is to be spray painted later so at least the rust have to go. Some steel brushing does that just fine.
-
This needs to hang on the wall so some holes will be needed. Some marking tools are good to locate those.




-
-
Next is putting the actual TV hanger on and finding a sensible position for it.
- The TV hanger.
- Using a distance tool to place it 1cm from the top edge, and in the middle lengthwise.
- When in the right spot make some marks for where the holes to secure this position should be.
- Making some quick holes with a hydraulic punching tool.




-
- Holes made - going on the prepare for welding.
- Removing paint and patina in the areas that will later be welded.
- Cleaning up the same areas with acetone.
(An important note on acetone by the way is that is self-ignites quite easily - thus the paper or rag used need to be dispersed of safely in a fireproof bin or soaked in water.)



-
I was going to do the actual welding too, but that hit a stumbling block. It is -12 degree Celsius in the workshop, and the welding machine refuse to cooperate at that temperature. So I've turned on some heat and hopefully the machine will warm up enough to finish this later.
-
After a few hours the workshop was warm enough for the welding machine to operate properly. So:
- Preparing for welding. The screws and clamps hold the TV holder in the right position and contribute to minimize welding distortions.
- Welding pretty much done. The edges of the TV holder was quite rounded so it took more heat than anticipated to get in those nooks. So some paint melted off here and there. No worries as long as it kept away from the actual weld areas.
- Finished with welding and removed clamps and screws. Later on the welds will be cleaned up and the bottom area spray painted matte black similar to the rest.
- Just a curiosity for those who haven't seen one: A welding stool. It can be tipped in three positions giving different sitting heights. Simple and great!
Hope someone found it remotely interesting :)




-
Weld done!

Spoiler:

-
By the power invested in me by heat, electrons, and the mighty Fronius, I declare the parts joined in lowly welding. (Until something do them part).

-
Good job
And the welding chair is a good idea 
Sent fra min M2002J9G via Tapatalk
-
I so wish I could weld, I mean I can, I’ve done my share on cars, I like stick, but I just can’t now because of my seizures, I can’t be around the flashing lights! That one project I did from parts which was a recumbent trike from like 4 bikes all I used was nut and bolt, grinder and drill, that thing would have been soooo much better welded! Here’s a video the Mrs took when I was testing it out,,
JR -
That cycle looks good. I can imagine how welding would make it easier though.
I have machines for a few different welding processes for metal and few of them flashes much as such. Dirty base materials/ rust/ paint and whatnot will misbehave but they shouldn't be in a good weld in the first place.
Stick welding - random flashes and sparks.
MIG welding - less random flashes and sparks, but still there.
TIG weldiing - no random flashes or sparks, a single continuous light with turn on and off and intensity under your control.
Gas welding - similar to TIG welding.
Resistance welding - literally done in a single flash in a fraction of a second. I usually just close my eyes and fire. (If the weld itself is covered you can't even see the flash).
(There are many others too, but I don't have those).Then there is brazing as opposed to welding - the filler additive melts, but the base metals don't. The process has some advantages and disadvantages compared to welding. As a mad plumbarian you likely know it very well already. (I think some bikes are built like that rather than with welding?) Two options I find interesting is the option to braze using induction coils or high temperature ovens - the temperature makes the additive melt but not so high that the base materials get soft. (The base material can still have all kinds of reactions to being heated and cooled, but that might be for better and worse).
I'd like to try brazing with an oven or inductive coils, but so far I haven't had an excuse to spend time exploring - I imagine a sturdy setups and repeated failures will take more time and money than than justifiable for what I typically do.
-
Never really stopped in here before. Shame. Some good work here.
This is not really work IN the shop so much as it is work ON the shop. The house...the work bench is in the basement:
[attach id=0 msg=2499547]




-
^^^ Second and third picture give an idea the condition of the logs when I got here. Dry, peeling, exposing some wood. Second pic, bottom rows give a good example. Second pic top rows after HAND sanding and restaining with Sikkens (PPG) ProLux.
Top and bottom picks are front of house while work in progress. Too pic is the corner closest to driveway. Bottom pic wide view of front
-
I finally decided that hand sanding was out of the question if I wanted to get this done before I die someday. Took my Milwaukee grinder with a Diablo wheel and tried to touch the logs very gently.
Finished product front wall of the house:


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login