EDC Bit Ratchets
-
@m47mu74nt said:
This thread is going to be super interesting !
I carry the Victorinox ratchet, and the only complain I have with it is the incompatibility with Leatherman bits on the inline slot.I've been curious about the Victorinox ratchet. I am not a fan of pass-through ratchets, though. Not to mention this is quite expensive to get. But I'd like to get my hands one one, if only to try it out.
-
@GearedForwards said:
I don't know why, but something always looked 'wrong' about those flat form factor ratchets
Enjoying the thread, I've wanted a Topeak ratchet for years but never jumped on it, this might show some good alternatives

Yeah, those cheap flat ratchets are all over the place. You can even find it with no brand, that's how cheap they are.
The Topeak on the other hand, now that's a ratchet. A bit expensive to get, and I do not want bike-specific tools with it. I haven't seen any set with just the ratchet, bits, and case, and maybe an extension. Well, I actually have, but it was not branded by Topeak.
That's the interesting part of this whole thing.
Most of these micro ratchets share manufacturers and therefore parts, and you can find the exact same tool from a few brands, or the same head on different tools. The Topeak for example, is the exact same tool sold by Granite and Blue Point, and it is almost the same as the Giant ratchet, and the PK ratchet, which also come under other brands. -
@ReamerPunch said:
The Topeak on the other hand, now that's a ratchet. A bit expensive to get, and I do not want bike-specific tools with it. I haven't seen any set with just the ratchet, bits, and case, and maybe an extension. Well, I actually have, but it was not branded by Topeak.The Lite DX version I posted is the closest I've found, in that the only bicycle-specific tool in the package is a pair of little nylon-plastic tyre levers... which you can easily chuck or give to a cyclist friend at work. It has the bits, ratchet and a 6mm extension, leaving room for a few more extras of your choosing.
UK Amazon has them for about £22, currently. -

I just ordered it. And the Prestacycle one.
The Topeak cannot be missing from this thread I think. Although it is almost identical to my PK Tools ratchet. But the Topeak has a dozen bits, so I'll cannibalize the set once it's here. :D
The Prestacycle looks great, too. A big longer, a bit more robust, and the extension can fit through the head for the T-handle configuration. And it's not that expensive for what it is. -
Also, I've been looking closely at the Klein one. Adam is using it in the Toolbox Challenge. Small head, 72 teeth, good quality, I like the finger hole too. And this is probably the only one not branded by anyone else. It only comes with four bits and the socket adapter, but that's fine, already have hundreds of bits. ::)

I have decided not to get the Wiha one.
The head is the same as the CyclingDeal Cigar kit ratchet, that I have. More on that when I review it.
But the Wiha does not have an in-line driver, and it is heavier. And I already have that head in another ratchet, so I don't know. It does have a nice case with a ton of good quality bits, so I'll think about it. It might be on sale one day.

-
On the subject of ridiculously small keychain-sized ratchets, I found these guys:
https://www.enjukuracing.com/products/hks-tone-ratchet-key-holder-set.html
https://www.amazon.com/HKS-Tone-Ratchet-Key-Chain/dp/B084S532XDThe first one comes with a quick-release 1/4 drive insert, and has a direction switch.
The second one has no ratchet insert, so you need to buy it separately, no direction switch (use other side to change direction), but does have a cool bonus pivot, and is cheaper...
I was tempted to get the first one because of quick-release and direction switch.If you hook it up to this adapter from 10mm to magnetic hex bit (https://www.amazon.com/GEDORE-7RB-6-Adaptor-Hex-10/dp/B004ISRGIO) instead of using the quick-release insert, you can make it directly accept hex bits instead of chucking on a larger 1/4 drive to hex bit adapter...
These things are ridiculously small and definitely keychain sized (~ 2"), to the point where it might actually impair their functionality as a ratchet. With practice you can make it work. But I guess they are cool fidget toys that can double as a real ratchet in times of need... The 3"-4" long ratchets might be more usable if the goal is real-world use.
Also finger ratchets like these that directly accept bits would maybe make sense for EDC (bonus made in USA): https://www.amazon.com/gp/product/B00DTEDYAM/
-
Interesting thread and great reviews on each.
-
@lsalzman said:
On the subject of ridiculously small keychain-sized ratchets, I found these guys:https://www.enjukuracing.com/products/hks-tone-ratchet-key-holder-set.html
https://www.amazon.com/HKS-Tone-Ratchet-Key-Chain/dp/B084S532XDThe first one comes with a quick-release 1/4 drive insert, and has a direction switch.
The second one has no ratchet insert, so you need to buy it separately, no direction switch (use other side to change direction), but does have a cool bonus pivot, and is cheaper...
I was tempted to get the first one because of quick-release and direction switch.If you hook it up to this adapter from 10mm to magnetic hex bit (https://www.amazon.com/GEDORE-7RB-6-Adaptor-Hex-10/dp/B004ISRGIO) instead of using the quick-release insert, you can make it directly accept hex bits instead of chucking on a larger 1/4 drive to hex bit adapter...
These things are ridiculously small and definitely keychain sized (~ 2"), to the point where it might actually impair their functionality as a ratchet. With practice you can make it work. But I guess they are cool fidget toys that can double as a real ratchet in times of need... The 3"-4" long ratchets might be more usable if the goal is real-world use.
Also finger ratchets like these that directly accept bits would maybe make sense for EDC (bonus made in USA): https://www.amazon.com/gp/product/B00DTEDYAM/
Those are quite neat. True, they could be too tiny to actually use effectively. The Ares is only 85mm, and although heavier, could very easily live on a key-chain.
-
@Tasky said:
^ That's pretty much what I was gonna say about the Topeak.One thing I have found is that the inline driver, the lack of knurling really robs you of grip and power... but a sleeve of Sugru built up flush with the driver end, with some ribs or chequering laid in with a credit card edge, before leaving it to cure overnight, does work rather well!! ;)
I've seen two ratchets that address this quite convincingly.
The Blackburn Big Switch ratchet has knurling on the in-line driver.
Looks like Topeak-sized, but even more expensive. I also have no use for the extra bike stuff, and I haven't seen it available in other sets.

The Synchros Lighter has knurling on the stem. Also a good approach. I do not know which of the two I would like better. Maybe the Blackburn, I think. Kinda curious to try out both. Maybe one day. But the Synchros is way up there. I can get two Topeaks and a Happy Meal for one Synchros.

-
-
@ReamerPunch said:
I've seen two ratchets that address this quite convincingly.
The Blackburn Big Switch ratchet has knurling on the in-line driver.I agree, the Blackburn is likely the better of the two, as the knurled section is thicker. The Synchros is a bit thin on the stem and, having large hands, I built up the stem of my Topeak for the same reason.
-
I'm not sure if this counts, but I use this a LOT at work...
![DhGYzc0[1].jpg](/assets/uploads/_imported_attachments/migrated/529882_DhGYzc0%5B1%5D.jpg)
-
Good work thank you for this thread and those who offered their thoughts. I have loved the idea of a mini ratchet and a while ago I made one to fit my LM bit holder. It was decent but not compact per se. I enjoy seeing everything and while I am not a fan of the pass thru ratchets I am intrigued.
Looking forward to the next installments.
-
@ReamerPunch said:
Thanks!
I've got more to post. Waiting for another two to ship any day now. And I am thinking about ordering the two I mentioned above.

Would you accept "help" so you can get the Vic Ratchet?
(I am really curious of how it performs against the others)- I'm sure a big comparison table could be super useful
-
I am open to suggestions.

I am thinking of making a table or two. I'll see if I can get it started today. -
@charlie fox said:
I'm not sure if this counts, but I use this a LOT at work...It sure does!

I've seen that before. And it's not that expensive. I would prefer an in-line driving socket instead of a bottle opener, but it does have several functions. Do you find the bottle-opener notch annoying at all?
-
@Aloha said:
Good work thank you for this thread and those who offered their thoughts. I have loved the idea of a mini ratchet and a while ago I made one to fit my LM bit holder. It was decent but not compact per se. I enjoy seeing everything and while I am not a fan of the pass thru ratchets I am intrigued.Looking forward to the next installments.
Thanks.

I've got a couple on the way, and looking around for more.
I particularly like those with an in-line driver, it is really handy. -
Also I found this online.
But again, this might be a bit too small to use effectively. The Ares may be a bit heavy for a key-chain, but it is short. The Topeak and its kin may be a tad long, but they are lightweight. Pros and cons to each, I guess.

-

Giant Ratchet Tool
(can also be found branded by Liv, the sister company of Giant Bicycles)
Max torque rating: 30 Nm / 22 ft lb
Weight: 32g
Kit weight: 123g
Length: 93mm
Head width: 15mm
Head clearance with standard bit: 25.5mm (adds 0.5mm)
Teeth count: 52
Minimum swing arc: 7°
Bit retention: spring
In-line driver retention: magnet
Bit material: S2 steel
Handle material: Chromium-Vanadium steel
Price: $22, with 9 S2 steel bits
Bits: Flat 4, Allen 2/2.5/3/4/5/6, Torx 10/25Accessories
The Giant comes with nine S2 steel bits, a bit holder, and a plastic case with rubber friction caps on both ends. When closed there is some rattling but a foam pocket is included, to cushion the set a little. The bit holder has eight slots, and a loop which is a little large to hold a bit tightly. The ratchet cannot fit in the case with the bit in either socket. The ninth bit can be carried in the loop if it is lined with some plastic to make it fit tighter. Or it could be carried at the bottom of the foam pocket, under the rest of the bits. Note that the set does not come with any Phillips bits, so this may require some additions to function as an edc kit. Still, Phillips bits are extremely common and easy to source.
Dimensions
This is minuscule, with the same length and ratcheting head of the PK ratchet and their kin (Topeak, Katana, Sonic, Granite, etc). It is marginally heavier than the PK, at 32 grams, and its stem flairs to one end. This is insignificant size-wise, and it will occupy virtually the same space as the PK ratchet.Teeth Count
The exact same head as the PK Tools ratchet, the Giant has 52 teeth, for a 7 degree swing arc. This is quite impressive for how tiny the head is and makes the ratchet easy to use even in confined spaces.
Bit Retention
The spring on the Giant is not as tight as the PK ratchet spring, making bits easier to remove. The spring is by no means weak, and holds the bits firmly.
The magnet on the Giant is smaller than the PK ratchet's magnet, allowing for stubby bits to be removed without hassle, while still holding them securely.Bit compatibility
Stubby bits can be removed easily from either end.
Standard double-ended bits and Leatherman bits can be used in the ratcheting head, as long as one end is thin enough to pass through the hole.
The in-line driver socket is too shallow for double-ended bits to engage, so they turn freely and cannot be used. Leatherman bits barely engage, but can be used in a pinch, although they will have a lot of movement left and right.
Standard bits that have a more pointed back, like Wiha bits, bottom out flush with the bit retention disk. This makes the head add no length to the bit, essentially allowing the bit clearance to be the same length as the bit. This also allows those bits to be removed very easily, by pushing the back end with a thumb.
PK on the left, with a common Chromium-Vanadium bit, does not sit flush; the ratchet head adds 0.5mm to the bit.
Giant on the right, with a standard Wiha bit. It sits flush with the back of the ratchet head, no length added.

Switch action
The switch is different than that of the PK ratchet. While both sit in a scalloped spot to aid use, the Giant's switch is also fluted for its entire length, which allows it to be operated a little more easily. It is low-profile, it does not protrude at all, and has no wobble.Ease of use
Although the Giant looks like the PK with only a few cosmetic differences, this is not the whole story. The in-line driver's magnet of the Giant is smaller, so stubby bits will not require pliers to remove them. The spring is also not as overly tight as the PK ratcheting head, so again, bits are a little easier to use. The switch is also different, easier to operate with a thumb.
The Giant has a finger groove which improves ergonomics when using the in-line driver. Although no knurling exists, this groove offers a natural position for your thumb and index to lock in, and the tool will not slip.
There is also a knurled finger wheel on the ratcheting end, to make quick work of somewhat loose screws.
Of course, the 52 teeth allow for a seven degree swing, making it quick to use. There are other ratchets with higher teeth counts, but they are not as tiny as this.
The top rubber cap has ridged sides to make it easier to remove. The bottom cap can also be removed, and they are interchangeable. They are friction caps and fit the case very securely.
The branding, drawing, and list of bits are printed on the case, so they will wear off eventually.
Construction Quality
Flawless. The Giant ratchet has excellent fit and finish. Everything is chamfered beautifully. The finish is consistent. The magnet is perfectly centered. The ratcheting action switch has no play. The ratcheting socket has been fitted perfectly with even less wobble than the PK. The writing on the knurled wheel is also a bit more crisp and easier to read compared to the PK ratchet.
The bits and case are also excellent, with precision machining and tight fitment.Portability
The Giant comes in a flat carrying case, that will fit in any pocket. There is also some room for a couple more bits. The included foam pocket will help cushion the set in the case and limit rattling.The ratchet itself is microscopic and will fit in any edc pouch, occupying very little real estate. It will also fit in a pen sleeve. The hole in the ratcheting end also allows the ratchet to be clipped to a pack or even belt-loop with a quick release clip or carabiner.

Value
This costs a bit more than the PK ratchet, and includes nine S2 steel bits, a bit holder, foam pocket, and a plastic carrying case with rubber caps.Conclusion
This may seem expensive at first glance, but the Giant is quite different than the PK. The magnet is smaller, the spring is not as tight, and the switch is easier to operate. The quality is even higher, the ergonomics are better, and it has nine S2 steel bits and a nice case, and it is not much more expensive. If you are only after a tiny ratchet, get the PK. If you are after an even better tiny ratchet with great bits and a case, get the Giant.
Pros
-S2 steel bits.
-Exceptional quality and finish.
-Knurled disk allows quick turning of loose fasteners with fingertips.
-Ratchet end compatible with many double-ended bits.
-Being able to refer to a micro ratchet as "Giant" is amusing.Cons
-None.If you liked this ratchet, also check out:
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login










