Combo Edge Challenge 2/22-3/2/22
-
-
@Alan K. said:
One more day!
:ahhh
:ahhh
:ahhh -
@SurgeUk said:
Sorry EB I have no idea how I missed this response
::)No worries!

:D
Nothing wrong with that, I'm always looking for a reason to celebrate.@Sos24 said:
I just realized my old Benchmade 940 has a combo edge. I think this will be the perfect reason to dig it out.Sounds great.
I just pulled out a little something special for this challenge myself. An old friend will be making an appearance.This is going to be fun

-
Day 01
Today I selected a first gen Myerchin Titanium rigging knife model 377P. It is 3/4 serrated with the non-serrated portion towards the tip of the blade. I used it to open a box of cat litter.

-
Day 1
Titan Swivel Head ratchet
Aeloa key-chain ratchet
GreaTalent ratchet kit
Ovatt ratchet kit
And Engineer pliers with the cover


-
DAY 1 Part of the torture of the Toolbox Challenge was having a new Signal sitting around. Now I can carry it for a month!


-
<u>DAY 1</u>
Excellent start awl

Today the Wingman will be my erm....Wingman

Not much use anticipated as I need to be out and about and can't really carry it (locking blade and no reasonable excuse ::))
Don't you just love British knife laws


-
Day 1 of

BuckTool 360

Read ReamerPunch's excellent review of the BuckTool 360:
/post/1936624 -
Powernoodle Day 1
*
Spyderco Resilience Lightweight. 4.2" (107mm) 8Cr13MoV blade, 4.4 oz (125 grams). The relatively large expanse of plain edge is good for push cutting envelopes, peeling apples, etc., while the serrated portion rips through packing straps, tape, rope, etc.*
-
@ReamerPunch said:
Day 1Titan Swivel Head ratchet
Aeloa key-chain ratchet
GreaTalent ratchet kit
Ovatt ratchet kit
And Engineer pliers with the cover


Great start! thats a lot of fun gadgets you have there
@Fireman said:
DAY 1 Part of the torture of the Toolbox Challenge was having a new Signal sitting around. Now I can carry it for a month!


The Signal is one of the best Leatherman Tools these days, I think. I can think of a thousand times in the past that I could have used the hammer on the end, instead of the frame of my Leatherman Wave.

BuckTool 360

Read ReamerPunch's excellent review of the BuckTool 360:
/post/1936624Nice! I was really hoping to see the BuckTool in the mix. A friend of mine still has this as his only pliers based MT
@powernoodle said:
Powernoodle Day 1
*
Spyderco Resilience Lightweight. 4.2" (107mm) 8Cr13MoV blade, 4.4 oz (125 grams). The relatively large expanse of plain edge is good for push cutting envelopes, peeling apples, etc., while the serrated portion rips through packing straps, tape, rope, etc.*
Glad to see the dedicated folder in the fray - seems to be more common in the wild, and nearly all the new stuff at ShotShow and BladeShow is a folder.
@Alan K. said:
Day 01
Today I selected a first gen Myerchin Titanium rigging knife model 377P. It is 3/4 serrated with the non-serrated portion towards the tip of the blade. I used it to open a box of cat litter.Rigging knives are a great shape for EDC... sheepfoot blades in general. The tip of the blade is directed at a forward angle, which makes it great for piercing into boxes and such
Off to a great start!
I'll post mine in about 10 hours from now, still within Day1 for me.
-
Good luck everyone !

-
@ElevenBlade said:
The Signal is one of the best Leatherman Tools these days, I think. I can think of a thousand times in the past that I could have used the hammer on the end, instead of the frame of my Leatherman Wave.
I've also used a Buck 110 like that. :-\

-
@ElevenBlade said:
I could have used the hammer on the end, instead of the frame of my Leatherman Wave.I foresee an EDC Hammer Challenge in our future.
-
@powernoodle said:
I foresee an EDC Hammer Challenge in our future.Echotech has been there, done that :D
/post/2275198
-
A pic of the BuckTool 360's combo blade in action:

-
**Day 1 **
The knife that got it all started. Its been about 20 years that I've had this knife. It was the first one that I bought that I put a lot of thought behind. I thought that this would be a great all-rounder, good for cutting and scraping, and ....
... even tightening some screws in a pinch. Turns out, it's rubbish for tightening screws... who'd've thunk it? But it's excellent at tearing thought things, and it's tough as nails.I'll be using this for the first 10 days of the challenge.
Today's use was to put a nick in an orange peel, to get it going. That's about it so far.

-
Day 1
The 940 helped open some ground beef for dinner

It also helped break down some boxes but no picture. -
Day 2 of

I chose the Stanley FatMax today and used the combo blade to cut a nylon rope. It did okay, but I did need to make a second pass due to the shortness of the blade:

You can find more pictures of the Stanley FatMax and its sibling, the Dewalt MT16, in this thread from Chako:
/post/940605
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

