-- Soldier On! --
-
@Nix said:
More Soldier action today.
Used the Soldier to cut the above pork loin section into kabobs.

Taking off the "silver skin" or fascia from the loin seemed trickier with the serrated blade than I expected. Maybe it was just me, but I think a plain edge would have done a bit better. Cubing the meat up was easy with this sharp knife, however.
Cubed meat got marinated for an hour or so in olive oil, vinegar, garlic, garlic, garlic, salt & pepper, and some herbs. A bit more salt & pepper, then on to a hot grill. Served with grilled onions and (not shown) tomato salsa. T'was goooood!

sounds greatI tried the 08 serrated edge on the silver skin of a pork loin a few weeks ago and ended up using a Vic SE pairing knife as the SE tore it up a bit
For the loin I first dry it off with paper towels and then a light coating of olive oil. Then coat it in a mixture of brown sugar, garlic powder, chili powder, cayenne, mustard powder, salt and pepper. Into air fryer for 20 minutes at 200C, comes out great
-
@comis said:
Doesn't matter what it really mean, the picture said it all. Looks yummy!That's cute. I have taught little guy to stay away from anything that's shiny on my table, and knives are dangerous
toytool only meant for dad. So far the devious plan to keep all the goodies to myself is working out quite well, but knowing him, it is just a matter of time he will start eyeing my toys.I tried an approach based on mutual respect with my older kid...
Since his early years he can see and even touch most of my tools and SAKs... And my training Jian swords, Dao swords, Hook swords, a Kuan Dao (the list goes on). But only with supervision and asking first. Worked very well. He never got any of these things without asking first.
He got his first SAK and first toolbox with circa seven years old.
Let's see how It works with my little girl in the future.(In the pic, he dissassembling a bed last year)

Enviado de meu Moto Z2 Play usando o Tapatalk
-
I tried the 08 serrated edge on the silver skin of a pork loin a few weeks ago and ended up using a Vic SE pairing knife as the SE tore it up a bit
For the loin I first dry it off with paper towels and then a light coating of olive oil. Then coat it in a mixture of brown sugar, garlic powder, chili powder, cayenne, mustard powder, salt and pepper. Into air fryer for 20 minutes at 200C, comes out great
Sounds excellent! -

@Hevy (CT-782) said:
I tried an approach based on mutual respect with my older kid...
Since his early years he can see and even touch most of my tools and SAKs... And my training Jian swords, Dao swords, Hook swords, a Kuan Dao (the list goes on). But only with supervision and asking first. Worked very well. He never got any of these things without asking first.
He got his first SAK and first toolbox with circa seven years old.
Let's see how It works with my little girl in the future.(In the pic, he dissassembling a bed last year)

Enviado de meu Moto Z2 Play usando o Tapatalk
-
I bet it was...even though the onions are underdone for my liking. I like my onions burned (I know, I'm a wacko).
@Hevy (CT-782) said:
Coffee is always needed to keep the rithm.Sweet mug!

Day 60
Two-thirds of the way through! Broke down some boxes today.
[attach id=0 msg=2330043]

-
Day 59: Fruit Ninja

-
Day 61
The surprise box arrived!


-
D +60
Again, another street scene
(can't believe it's 2 months already!)

-
@ReamerPunch said:
Day 61The surprise box arrived!


-
Day 61

-
@Hevy (CT-782) said:
I tried an approach based on mutual respect with my older kid...
Since his early years he can see and even touch most of my tools and SAKs... And my training Jian swords, Dao swords, Hook swords, a Kuan Dao (the list goes on). But only with supervision and asking first. Worked very well. He never got any of these things without asking first.
He got his first SAK and first toolbox with circa seven years old.
Let's see how It works with my little girl in the future.(In the pic, he dissassembling a bed last year)

Enviado de meu Moto Z2 Play usando o Tapatalk
That's really cool.
Since many of us are knife enthusiats, so this may not need more introduction, but Kuan Dao is a type of Chinese polearm which has a long blade attached to the top of the handle, and usually with a spike at the end. One of the most well known weapons was the Green Dragon Crescent blade yielded by General Guan Yu, in frictional story "Romance of Three Kingdoms". The legendary weapon was said to have weighted at roughly 20kg. And that's how the weapon got it's name Guan(Kuan) dao (sword).
In reality, no one really knows whether General Guan did yield the Green Dragon Crescent or whether it did weight 20kg, but General Guan being one of the most fearsome and loyal warrior is well respected by all the armed/police/militia forces within the Chinese culture till today. A modern movie adaptation of Guan Yu, just for fun:
https://youtu.be/5EHvtuEgjII?t=45 -
**Day 58
**

No use till now, just posing with to a marble run the little guy loved so much.
-
Thanks for that explanation - I for one certainly learned something new, Comis!

Day 61 (D+60)
It’ll be another day at the keyboard, but on firing up the computer, the trackpad tells me the batteries are running low already - shows how much I’ve been using it I suppose! At least swapping eneloops around isn’t that much of a problem! The keyboard is still at 85%….

-
@Simon_Templar said:
Geez, youAussiesKiwis got some nasty critters <shudder>Fixed.
-
DAY 61:
-
@Rizio Il Ghiro said:
Thanks for that explanation - I for one certainly learned something new, Comis!
Day 61 (D+60)
It’ll be another day at the keyboard, but on firing up the computer, the trackpad tells me the batteries are running low already - shows how much I’ve been using it I suppose! At least swapping eneloops around isn’t that much of a problem! The keyboard is still at 85%….

I have a dumb home improvement question for everyone--I recently got a electric hand drill and was drilling holes on metal carbinet frames.
I noticed I did need to exert a fair amount of force in order for the drill bit to go thru that 2mm sheet, but if I push too hard the chuck will no longer be able to hold onto the drill bit, and the bit may loosen and slide all the way inwards. Once I created a 2-3mm lead hole, enlarging the hole was way easier.
I have some experience with a drill press, and holding onto the drill bit never seem to be a problem(the chuck wasn't keyless). But these keyless chuck on electric hand drill seemed weaker.
Is there anyway to deal with this? Will changing to all metal chuck solve the problem? Or do people simply let the drill bit slide all the way in, before enclosing the grip?(which may cut and ruin the grip if it slip under pressure?)
-
Are you locking the chuck? Crank and tighten down on the bit then go back the other way a click.
-
Day 59
Catchup day 59
Tinkering in workshop
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
