EDC Bit Ratchets
-
@ReamerPunch said:
Which ratchets are you talking about?
Like Facom Rotator Handle Ratchet 1/4'' but that doesnt have ability to put 1/4” bit straight without adapter. I would like to see one with ability to accept 1/4” bit without adapter
Only Tools Matters
-
Founded one but not sure about it ”FACOM R.PE360 - RATCHET FOR 1/4" BITS WITH ROTATOR HANDLE” is it good or bad choice. What ratchet you recommend for edc purpose? I need one with low swing arc and ideally bit adater on both end. I have Vic ratchet but it feels too high swing arc for tight places.
Only Tools Matters
-
looks cool !
how didn't I think about this ??? -
@m47mu74nt said:
for now I'll think of using SOG bit kit that are very slim + FACOM ratchet and adapter insteadSo I am now storing the USAG bits inside SOG bit kit holders, and ratchet + extention + socket adapter : this way it fits in the small mesh pockets of the 5.11 9x9 utility gear set (the USAG/FACOM standard box wouldn't)


-
-
@Antti Lammi said:
Like Facom Rotator Handle Ratchet 1/4'' but that doesnt have ability to put 1/4” bit straight without adapter. I would like to see one with ability to accept 1/4” bit without adapterOnly Tools Matters
I have not reviewed any ratchet like that yet. I hope to find one that is small.
-
@Antti Lammi said:
What ratchet you recommend for edc purpose? I need one with low swing arc and ideally bit adapter on both end. I have Vic ratchet but it feels too high swing arc for tight places.Low swing arc and driver on both ends.

Ares
I edc this. 72 teeth = 5° swing arc. Good size. Inexpensive. No problems with it.

Prestacycle
I like this one. 60 teeth = 6° swing arc. High quality. Comes in a nice, flat nylon wallet. You can put the extender through the head for T-handle.

Topeak
52 teeth = 7° swing arc. This is high quality and comes in a nice pouch with bits and an extender.

Rujoi
60 teeth = 6° swing arc. Flexhead. You can also have T-handle with this one. Many brands sell ratchets like this one.

Here is a size comparison. The Rujoi is a little longer than the PrestaCycle.

-
I think I need the Rujoi : the handle is a little different than the Facom/usag, and it could be better at some point
-
Hmm seems like i need to try Rujoi and Ares, both seems like i migh like those
Only Tools Matters
-
I got this Tone (Toh-neh, not 'tone') ratchet this morning and I am impressed. A nice compact package, with extension, twenty bits, and a tiny Tone logo sticker, in a drill bit container. That extension is truly amazing. But no spoilers. :D
This is available in Amazon Japan. Fast DHL shipping, five days from order to my door. I am very pleased with it and recommend it for a nice, compact edc set. Full review will follow soon.


-
The form factor of the box looks truly amazing

-
Yay

EDIT: Um, maybe not yay.

-
@m47mu74nt said:
The form factor of the box looks truly amazing
Everything fits in do nicely. No wasted space. Fits in a pocket like a dream.

-
@Antti Lammi said:
Like Facom Rotator Handle Ratchet 1/4'' but that doesnt have ability to put 1/4” bit straight without adapter. I would like to see one with ability to accept 1/4” bit without adapterOnly Tools Matters
They released a rotator bit ratchet!
https://www.youtube.com/watch?v=EBQKisiGjUU -
@ReamerPunch said:
They released a rotator bit ratchet!
https://www.youtube.com/watch?v=EBQKisiGjUUThat looks awesome, maybe need to but this instead others. Noticed that price bit salty for only ratchet but it has rotating handle and fairly low swing arc so i might forgive price for those.
Only Tools Matters
-
Thanks so much for all these reviews. I'm trying to figure out what to EDC, and this is great. I thought I might help out a bit.
I was at Harbor Freight and picked up the ICON set. You may notice some similarities to Facom.
Weight
Ratchet: 61g
Extension bar: 33g
Full case: 361gLength
Ratchet: 110mm
Extension bar: 100mmBit retention: spring detent
In-line driver bit socket: yes
In-line driver socket bit retention: magnet
Bit material: S2 steel
Handle material: Chrome Vanadium steel
Price: 45$ with 32 bits, 1/4" square adapter, extension, and case
Bits: Torx bits: T6, T7, T8, T9, T10H, T15H, T20H, T25H, T27H, T30H, T40H, Slotted bits: SL4, SL5.5, Phillips bit: PH1, PH2, PH3, hex bits: H1.5, H2, H2.5, H3, H4, H5, H6, H7, H8, H1/8 in., H5/32 in., H3/16 in., H1/4 in., Pozidrive bits: PZ1, PZ2, PZ3
Flex-head positions: 15° increments -
Looks very close to the FACOM/USAG one, even the box is "similar" but not "same" : it's shape might be even better ! (but the hinge, and the locking mechanism are identical for what I see)
Does it feature the "compact" socket adapter or the standard one?
-
Here is a mini ratchet from 711L (they make bicycle tools).
Link removed
[attach id=0 msg=2432748]
[attach id=1 msg=2432748]
[attach id=2 msg=2432748]



-
That is pretty small !

-
Wow, that's cute. I'd clip that on my keys. Rather price though. $30 US with no bits.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
















































