August Alox Addict Challenge 2023
-
@Grand_Banana said:
I will now start carrying the Electrician. This is by far my favorite Alox model and is usually paired with my LM Wave. The two-layer or three-layer Alox I think is ideal. No keyring nub is even better. One thing I don’t like about the setup with the electrician or pruner blade is the contact with the main blade compared with the can opener. Never noticed it until this morning .I had never noticed this either, so I just pulled out my old Electrician (OC w/brass liner) to check. Mine doesn't make contact. It's close, but I can slide a piece of paper between the main and wharncliffe with no friction. There also is no contact between the two blades of my pruner. Both knives have seen considerable use, and there are no rub marks on the blades from contact.
I do have some old users that have rub marks on the back of the main blade from the awl, but I think that's mostly from prior owners pushing too hard on the main blade when they opened it, causing them to rub together.
-
Day 20 bonus
New Alox Pruner came early
[attach id=0 msg=2435583]
@NutSAK said:
I had never noticed this either, so I just pulled out my old Electrician (OC w/brass liner) to check. Mine doesn't make contact. It's close, but I can slide a piece of paper between the main and wharncliffe with no friction. There also is no contact between the two blades of my pruner. Both knives have seen considerable use, and there are no rub marks on the blades from contact.I do have some old users that have rub marks on the back of the main blade from the awl, but I think that's mostly from prior owners pushing too hard on the main blade when they opened it, causing them to rub together.
Looks like was misremembering the pruner blade. It’s probably that darn saw blade and main blade contact I was thinking about max I have 2 electricians, the left most has been used quite a bit and the second middle left is new. Harvester hasn’t seen much use yet and the Pruner is new.
[attach id=1 msg=2435583]


-
@Grand_Banana said:
Looks like was misremembering the pruner blade. It’s probably that darn saw blade and main blade contact I was thinking about max I have 2 electricians, the left most has been used quite a bit and the second middle left is new. Harvester hasn’t seen much use yet and the Pruner is new.[attach id=1 msg=2435583]
Here are the only ones I have, old Electrician on the left, fairly recent production Pruner on the right. The main blade of the Electrician contacts the awl and there are light rub marks on it. None of this contact seems like anything to me, since I own many multi-blade traditional pocket knives that are much more prone to rub than a Victorinox.

-
Day 21
Pioneer slicing some clear heat shrink for cable labelling protection

-
DAY 20 The red Secretary posing...

-
Absolutely nothing today!
[attach id=0 msg=2435594]
-
Day 20
The new blues were yet on the table with my Farmer. So, the Electrician was slid into the pocket, just because no ring😉
Here it is laying in the sun while I fired up the grill for evening meal.
[attach id=0 msg=2435597]And, inside when I retrieved my 2nd set of bones, baby back pork ribs
[attach id=1 msg=2435597]

-
Day 20
Went to a festival with security today, so I ditched the pocket clip and just carried the FX in my back pocket with my bandana. Not a lot of uses lately.

-
Day 20:
Doing some light reading today, from the comfort of a hammock. I’ve also been cutting electrical tape and zip ties, while equipping my bicycle for some trail riding and bikepacking.


-
Day 20
Voyageur opened a popsicle which is one of my favorite things after a hot walk.

-
@Grand_Banana said:
Day 20 bonusNew Alox Pruner came early
[attach id=0 msg=2435583]
Looks like was misremembering the pruner blade. It’s probably that darn saw blade and main blade contact I was thinking about max I have 2 electricians, the left most has been used quite a bit and the second middle left is new. Harvester hasn’t seen much use yet and the Pruner is new.
[attach id=1 msg=2435583]
Nice addition
@LoopCutter said:
Day 20The new blues were yet on the table with my Farmer. So, the Electrician was slid into the pocket, just because no ring[emoji6]
Here it is laying in the sun while I fired up the grill for evening meal.
[attach id=0 msg=2435597]And, inside when I retrieved my 2nd set of bones, baby back pork ribs
[attach id=1 msg=2435597]Looks delicious
@BPRoberts said:
Day 20Went to a festival with security today, so I ditched the pocket clip and just carried the FX in my back pocket with my bandana. Not a lot of uses lately.
I hope it was enjoyable.
Doing some light reading today, from the comfort of a hammock. I’ve also been cutting electrical tape and zip ties, while equipping my bicycle for some trail riding and bikepacking.


Sounds like a lot of fun.
-
DAY 20
Harvester remained today in pocket. Used the main blade to pop top off of some hot sauce, and the cap lifter at the end of the day for a refreshing oat soda.
Launched from the Southwest
-
DAY 20
Some amazing Alox addictiveness going on here :ahhh
Helped out a friend at their greenhouse again. Carried the Farmer and the classic SD together today, those scissors came in handy. Also used the cap lifter on the farmer to open a bottle of fine sarsaparilla.
Cheers yawl


-
Day 20:
Spent the day just sitting out on the deck visiting with family, riding the 4 wheeler and golf cart with my kids, and ending the day playing on the hay bales with my two oldest. Perfect end to the last weekend of our summer break. My wife and I go back to work Thursday, and the kids start the following Tuesday. Josie will be in first grade, and Wylie will be starting preschool. This summer has flown by, and I'm not ready to give up my all-day everyday schedule with my wife and kids.


-
Day 21
Electricians, the OC has 98 stamped on the tang so maybe VIC were using up some Mod62 blades



-
@Echotech said:
Thought you might like to see the Brooklyn Bridge (NSW rather than NY) and CocoOf course!

@NutSAK said:
The main blade of the Electrician contacts the awl and there are light rub marks on it.I checked my Electrician (awlso OC with brass liners), and receipt paper will pass between the master blade and electrician's blade. Ditto the master blade and the awl. It's a tight squeeze, though.

@Echotech said:
Electricians, the OC has 98 stamped on the tang so maybe VIC were using up some Mod62 blades...Sounds about right. Either that, or the warranty folks did a blade replacement, and the Mod62 blade was what was available. Nice Electricians!

Another great day, y'awl!
Day 20
No use today, so here are some additional shots of the OC Electrician.
[attach id=0 msg=2435632]
[attach id=1 msg=2435632]
[attach id=2 msg=2435632]
.jpg)
.jpg)
.jpg)
-
DAY 21 Opening worm pills.


-
@MTSAK said:
Day 20:
Spent the day just sitting out on the deck visiting with family, riding the 4 wheeler and golf cart with my kids, and ending the day playing on the hay bales with my two oldest. Perfect end to the last weekend of our summer break. My wife and I go back to work Thursday, and the kids start the following Tuesday. Josie will be in first grade, and Wylie will be starting preschool. This summer has flown by, and I'm not ready to give up my all-day everyday schedule with my wife and kids.


Looks like fun
Some amazing Alox addictiveness going on here :ahhh
Helped out a friend at their greenhouse again. Carried the Farmer and the classic SD together today, those scissors came in handy. Also used the cap lifter on the farmer to open a bottle of fine sarsaparilla.
Cheers yawl


I love SAK scissors, they are so useful.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


yep one of the other I think