Leatherman Signal challenge: October 2024
-
Day 3
Boxes. So much the boxes.
[attach id=0 msg=2499107]

-
<a href="https://flic.kr/p/2qkn2ru" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/54040370594_cb5e284120_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
So yesterday, I did use the Signal to break down boxes that came in. In total I broke down about five or so. The Signal performed admirably. Some quick observations was that I did experience some hot spots on my hand after the five boxes I broke down. I did get pinched once by the carabiner opening. I would say, if you are doing a lot of cutting wear some gloves. After the boxes were broken down, I did a Quick Look at the edge and it held up well. Edge was still sharp and would have handled more use before a touch up. Did get quite a bit of tape residue on the blade which was expected. I didn’t see any chipping. More to come.
JonesE
Boxes can take their toll on a blade
Time for an easy "mod".
I'll never need a ferro rod or signal whistle during my normal life. Also, as much as I like and use Leatherman diamond-coated files, the one on the Signal is too small for regular use. I picked up some replacement parts from Etsy for those 2 tools that hold extra bits and a Vic tweezer.
Here's the kit:

Here's the parts with the bits they will hold:


Here's where the tweezers go:


It came with a thumb stud too. I don't normally like them, but I'll give it a try:

The final product:


I have one on its way to use in place of the sharpener. Still debating on the one for the whoste/ferro rod because I sometimes use the ferro rod for making coffee just for fun.
@Juan el Boricua said:
Day 3Decommissioning and, scavenging of salvageable parts from an old, curbside bike. Sadly, the bit/tweezer holder got out of commission as the pliers loosened grip and the top-mount bit holder slammed onto it, breaking off the tip that held it on the handle's cutout and rendered it "unclipable"; you win some, you loose some. I'll see what can be done to salvage it. [attach id=0 msg=2499080]
Sounds like a challenging day for the Signal
@m47mu74nt said:
Day 3:
"High vis" with a homemade Lego firefighter 4x4, based on the yellow Land-rover Defender model from Lego Creator (only stickers, wheels and a few other pièces are still from the original model)[attach id=0 msg=2499058]
Very cute Lego truck
-
The Signal was on coffee making duty.
First opened the fresh bag of coffee, then battening some sticks into smaller pieces using the hammer on the Kodiak.


-
@ SOS , great pictures and use. Getting my coffee now!😉
-
Neat mods and fantastic Lego Landy...and I'm having some coffee with lunch!

Day 4
One Signal feature I won't take advantage of is the sharpener. I've said before, and I'll say again, that my sharpening skills are somewhere between lacking and nonexistent. But I can see it being useful for sharpening serrations.
[attach id=0 msg=2499169]

-
Day 4 Went with black today for a rainy Black Oxide Friday.
<a href="https://flic.kr/p/2qkygpS" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/54042563828_f1f7cf817f_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Day 4
Another reason that I have stayed away from the Signal is that I almost never need a mutitool saw. I'm sure it's very handy for camping, and that is the Signal's focus, but in my normal life I think I have used a multitool saw only a couple times. For my next easy mod, I'm going to replace the saw with something more useful to me. The easiest would be a diamond file from a Wave. I could also replace it with scissors from a Wingman. I have extras of both, so I can't decide.


-
Day 4:
Didn't do anything but opening packages todayTook an unrelated picture and couldn't find the right shade of blue and pink
[attach id=0 msg=2499186]

-
Time for an easy "mod".
I'll never need a ferro rod or signal whistle during my normal life. Also, as much as I like and use Leatherman diamond-coated files, the one on the Signal is too small for regular use. I picked up some replacement parts from Etsy for those 2 tools that hold extra bits and a Vic tweezer.
Here's the kit:

Here's the parts with the bits they will hold:


Here's where the tweezers go:


It came with a thumb stud too. I don't normally like them, but I'll give it a try:

The final product:


Okaaaay, I absolutely need this.
-
Day 4
Not much going on other than opening packages of new-to-me-goodies: Original Wave sheath, Stayglow Climber and an MP400.
[attach id=0 msg=2499208]
-
M47, you DO need them; they've been THAT good to me that 3 out 5 of mines sport them!
:D -
Most excellent pics in here 8)

-
Day 4
Removing the accursed flow restrictor in a new shower head.
[attach id=0 msg=2499221]

-
DAY 5:
Started with a failure : 1/4" bits are too wide to get to the screw hidden inside the chimney, gonna stand up and seek for a proper screw driver (but it's not a "Signal" failure, more a general multitool limitation)[attach id=0 msg=2499241]

-
Day 5
Plumbing and electrical for today. [attach id=0 msg=2499274]

-
Day 5
<a href="https://flic.kr/p/2qkN3xo" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/54045252100_212a4005d2_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Chilling with an afternoon cup of coffee.
-
Day 5 (part two)
Here are the results!
The Signal cut the straps to open the package, scraped off the sealer around the old faucet gasket, broke off one of the winged nuts, and opened the new sealer's tube; and I'm more aware of what a wuss I am! Even with ALL breakers off, I sweated like a roasting pork while replacing the receptacle, as it was one of the few instances in my life that I did not used insulated pliers to work.
[attach id=0 msg=2499298]
-
@JonesE: the black oxide is fantastic!

@Rich_SD: I think I'd go with the file. But I do find a saw useful when working in my yard.
@Juan El Boricua: you scored pretty well!

@Cypren: I hate those things, too. Why anyone ever thought that might be a good idea is beyond me.
@m47mu74nt: the locomotive looks kinda cool with the bit smokestack.
Another great day, y'awl!

Day 5
I got a new phone yesterday, which fixed the comms issue. And I got the old one out of its godawful soft inner,/hard outer case. The Signal helped to deal appropriately with that abomination.
[attach id=0 msg=2499299]
[attach id=1 msg=2499299]
In the below photo, the piece cut with the plain portion of the blade is at the left, and a piece cut with the serrated portion is at the right. The serrated portion seemed to cut easier, but the plain portion cut cleaner.
[attach id=2 msg=2499299]
.jpg)
.jpg)
.jpg)
-
Day 5
Breaking down boxes...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
