powerlock owners club,
-
Thanks, Farmer!

-
I now have a PowerLock!
to Barry Rowland for making it happen.[attach id=0 msg=2529284]
The tip of the can opener is a little kinked, but that's not worth worrying about. I've already put the Phillips to use on a loosey-goosey doorknob. It handled the job better than I expected it would.
[attach id=1 msg=2529284]
I was kinda surprised to see that it includes a 1/4" driver. That may come in handy. Of course, I've put the blade to use. This particular PowerLock is likely to have a plain edge blade swapped in.
[attach id=2 msg=2529284]
The pliers, being geared are subject to Newton's Third Law of Motion. Since I'm more accustomed to Leatherman and Gerber pliers, that will take some getting used to. The gears awlso make the tool a little longer than I expected, yet it rides surprisingly well in the "fifth pocket" of my Carhartts.
So far, I'm pleased with it. I look forward to doing more extensive testing and making a few customizations. Thank you again, Barry!

![PowerLock_Owners'Club_28_April_2025(1)[1].jpg](/assets/uploads/_imported_attachments/migrated/584939_PowerLock_Owners'_Club_28_April_2025_(1)%5B1%5D.jpg)
![PowerLock_Owners'Club_28_April_2025(2)[1].jpg](/assets/uploads/_imported_attachments/migrated/584940_PowerLock_Owners'_Club_28_April_2025_(2)%5B1%5D.jpg)
![PowerLock_Owners'Club_28_April_2025(3)[1].jpg](/assets/uploads/_imported_attachments/migrated/584941_PowerLock_Owners'_Club_28_April_2025_(3)%5B1%5D.jpg)
-
Outstanding Dan! Welcome to the club!
-
Hey, congratulations on your newest Farmer!!! Hope you enjoy yours as much as I do mines; sadly did not participated as my Traveler proyect hasn't arrived. Most Powerlocks end up with the small screwdriver from the can opener bent slightly but it does not hinder its performance and, in any case, it cam be ground down to make the opener blade full sized. What I find as the most prized feature is the pliers head being a real needlenose, engineered to be the strongest when loosening (also the Vic's Swisstool and Spirit series have this last feature) and its compound leverage; boy does it grip! Anyhow, just here to say enjoy!

-
Congrats Farmer X on you new PowerLock. I hope it gives you years of faithful service. Your looks like the exact same setup I started the challenge with.
Barry, great job on making it happen.

JonesE
-
Thanks JonesE!

-
Thanks, y'awl!
As Juan noted, the pliers have a very fine tip. That could come in very handy. I'm also giving some thought to replacing the hex driver with a C-4 spike. -
This is it noble SOG knights!

-
This arrived today (finally); this was supposed to be my project base for the Power challenge (in which I did not participate) but, after cleaning it and upon closer inspection decided against modding for the following: has the early, squared tip and short cutters "USA" pliers head of the early models, along with no cap crimper; has "Patent pending" instead of the patent number and, has different combo blade (more pronounced serrations), different flat drivers (similar to the ones in the Paratool, but with lock nicks/stops); dedicated can/bottle opener, similar in shape to the one in the early Paratool and "claw type" of Leatherman's, no awl, and a nice cutting, roun tip file. The scissots, adapter, Phillips and saw are very similar to the ones on versions 1 and 2. The only reference to something similar was a mention of a sale in Ebay, made by gregozedobe back in 2012 in which the description stated as it being a "First Production SOG Powerlock"; sadly there were no pictures (or became unavailable). I like it as it is (even with the chewed cutters and reprofiled small driver, and my homemade socket adapter spring) and will be part of the collection but, would like to know if it could really be such an early production model; does anyone have something similar/have pictures that could correlate with my description; anyone more knowledgeable that could shed some more light?
Thanks for looking, and for tolerating ALL THIS! [attach id=0 msg=2529548] [attach id=1 msg=2529548]

-
I'm not a lot of use as far as knowledge goes on this Juan, but it's identical to the one I was issued 20+ years ago. No guards, pliers head with USA, etc. I've been looking for this one for years, so I'd definitely not mod this one. The older generations are getting to be harder to find, and more pricey when you do find them.
Nice find!! -
Juan, I don’t know much about the PowerLock and there generations. However, I would say it is definitely early. I have an Edmonds made P3 that has the same serrated blade, can opener, and slotted drivers. So I would say your PowerLock was made in Edmonds. Washington.
JonesE
-
Barry, JonesE; thank you!

-
I'm no SOG expert, but I'd say that's pretty early, and a great find!

I've had a chance to test out my PowerLock a little more extensively. As expected, the blade works well. The cap lifter seemed kinda small to me, but it handled the cap on a bottle of Jones Soda with nary an issue. While Victorinox need not worry about losing the title of Gold Standard of Multitool Scissors, those on the PowerLock work pretty well (and unlike SAK scissors, they do their best work at the tips). The awl works exceedingly well on the soft plastic of water bottles and my nicotine pouch cans. Hopefully I'll be able to take it to some leather soon.
-
That awl is a good one Dan! It definitely gets it done!
-
Thanks for the feedback Farmer.
I can attest that the SOG awl is one wicked little beast; I've used it on coconuts and, thanks to its length, makes having fresh coconut water a breeze!
-
Well, I was not ready for Barry's challenge (to which I'm still very sorry about not participating) but, I am for Farmer's !!!
The handle finally arrived, and went quickly to work to have my custom Powerlock Traveler (seen here with my very first PL, a black oxide B61).
[attach id=0 msg=2529730]
Inspired by JonesE, I built it using a Powergrab's pliers head and let me tell you, what a gamechanger: with only a small modification to the PL's handles, and you gain: a pommel, a magnetic bit driver, a true needlenose tip, and a sleeker appearance, and all without loosing nothing but the cap crimpers (but you will still have anvil style crimpers so, nothing big for me).
[attach id=1 msg=2529730] [attach id=2 msg=2529730]


-
Juan that's great!!

-
Due to my work, I need to have bladeless tools at work so, decided to copy the S61TR down to the robertson but with a kick: I added the v-cutter and, since the small flat driver from the can opener was broken, reprofiled the opener to a full blade one; the rest of the tools is standard SOG affair. My only gripe is that I might look for an early, round tipped file, as the spare one I had is of the scored-lines-type and is almost useless (good for my nails though!). So far, it has rekindled my likeness to the PL series, and will probably be replacing the Bladed Bladeless for work EDC. [attach id=0 msg=2529732] [attach id=1 msg=2529732]


-
Thanks Barry!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login