EDC Bit Ratchets
-

Milwaukee mini ratchet
Warranty: Lifetime
Weight: 77g
Bit kit weight: 25g
Length: 109mm
Head width: 20mm
Head clearance with standard bit: 35mm (adds 10mm)
Teeth count: 90
Minimum swing arc: 4°
Bit retention: spring and magnet
In-line driver: no
Bit material: Chromium-Vanadium steel
Handle material: Chromium-Vanadium steel
Price: $22 with 5 stubby bits and bit holder
Bits: Phillips 1 and 2, Slotted 3/16" and 1/4", 1/4" square adapter
Features: 5/16" (8mm) nut driver, integral carabiner/finger loop, knurled finger wheelAccessories
The Milwaukee mini ratchet comes with five stubby bits and a bit holder.
The bit holder holds the bits securely. It has a loop to attach to the ratchet's integral carabiner. It has the bit sizes clearly visible next to each bit place. When attached to the ratchet, the shape of the bit holder sits perfectly against the ratchet, but will swing freely. It would have been even nicer if the bit holder would attach magnetically on the ratchet, or with pins, or something that would make the set one solid, silent piece. The bit holder is a little wider than it could have been.
The bits are stubby. Even the socket adapter is stubby, which is unusual.
The Klein 65200 mini ratchet comes with the exact five bits the Milwaukee does.
Dimensions
Definitely on the larger side of mini ratchets, the Milwaukee is 109mm long and weighs 77 grams. It is hefty and bulky, and arguably awkwardly so. The head is tall due to the 8mm nut driver on the back, and the other end is also very wide, due to the integral carabiner.
Bottom right: LaBear Folding, CROM, Anvanna, Pro Bike, Railer, Engineer, Granite, Geinxurn, Klein, Milwaukee, PrestaCycle, Rujoi Flex-headTeeth Count
The Milwaukee has 90 teeth. This is interesting, considering that the Klein 65200 mini ratchet, which has seemingly the same head as the Milwaukee, has 72 teeth. 90 teeth means the Milwaukee has a minimum swing arc of 4 degrees.Bit Retention
The Milwaukee has good but not overly tight bit retention. The stubby bits it comes with can be removed easily with fingers. The Klein, which shares the head and retention system of both spring and magnet, had much firmer bit retention.Bit compatibility
Double-ended bits do not engage and cannot be turned. Leatherman bits barely engage and have significant play side-to-side.
Switch action
The switch is very short and flat. It would be very difficult to have it accidentally bump against something and have the ratchet direction change. It has good retention, and it is very easy to operate.Ease of use
Pretty much as good as the Klein mini ratchet.
The knurled finger wheel protrudes enough from the head and it is the easiest wheel to operate so far. The ratchet is long and provides excellent torque. The stem is flat compared to the cylindrical ones of most ratchets. This helps with grip and comfort. The finger loop allows for various grip configurations.
The head is narrow and has a high teeth count, even higher than the Klein.
Due to the 5/16" nut driver on the back of the head, the head is arguably taller than is needs to be. It adds 10mm to an inserted bit's clearance, which is the second worst, behind the Titan swivel-head ratchet, which adds 13mm. Stubby bits will aid in reaching fasteners in tight spots, but it only comes with four.
Construction Quality
The Milwaukee mini ratchet is very well-made. The finish is flawless. The moving parts operate smoothly with no issues whatsoever.
The carabiner gate has excellent retention and stays in the frame convincingly.Portability
The main focus of the Milwaukee ratchet in comparison to the Klein was portability. The fixed loop has evolved into an integral carabiner, and is the best of both worlds. The carabiner eliminates the need for additional clips, works as intended, and there is still plenty of room to use the loop in various grips, just like the Klein. Ergonomics are unaffected, which is a pleasant surprise, considering the placement of the spring gate.
The bit holder is also designed to attach to the carabiner, allowing for a few bits to piggy-back.
The ratchet is still a little heavy for edc, and rather awkward to store in an edc pouch. The head and carabiner end are much wider than conventional mini ratchets. Where a Mulwark/Topeak/Wera etc could slide into a wallet, pen sleeve, edc pouch, the Milwaukee cannot.

Value
At $22 with five stubby bits, this may seem as average, but compared to the Klein, it only gets better.Conclusion
The Milwaukee mini ratchet is the evolution of the Klein 65200. Fortunately, there are only improvements here.
The finger loop is now an integral carabiner, with the same ergonomics. The bit holder can be attached to the ratchet or your keys. The head has 90 teeth compared to the Klein's 72. The bit retention is much more forgiving. Both come with the same bits, so nothing was lost. The Milwaukee costs two dollars less than the Klein. Last and arguably most important, the Milwaukee has a lifetime warranty, compared to the Klein's one-year warranty. This is an obvious and significant upgrade. If you were thinking of getting the Klein, the Milwaukee offers more and costs less. Where the similarities end, the Milwaukee keeps going.This is recommended over the Klein, but do keep in mind that it is still long, heavy, adds 10mm to a bit's clearance, and will not fit in an edc pouch as effortlessly as most other mini ratchets. If you are looking for a slim, lightweight mini ratchet to tuck into your wallet, maybe keep looking.

Pros
-Lifetime warranty.
-90 teeth.
-Integral carabiner.
-Well-made.
-Excellent ergonomics.
-Finger loop allows various grips and tethering options.Cons
-Heavier than average.
-Head adds 10mm to bit clearance.
-With no bit inserted, the head is 20mm tall.
-Comes with only 5 bits.
-One end is very wide due to carabiner loop.If you liked this ratchet also check out:
-
The stats so far.
I have not included price because many have changed.
The Leatherman ratchet adapter is not included because it is not a bit ratchet.

-
Oh boy...


-
Wera also has a bicycle set in a nice wallet like the PrestaCycle, but it is double the price of the PrestaCycle. >:(

-
-
@ReamerPunch said:
Oh boy...
That looks like a pretty nice set, though the ratchet seems a little bulky for my liking.
-
-
Silly question. But would threading your keychain through the ratchet head eventually wear it out? I've had a few things wear eventually.
-
@Old Boy said:
Silly question. But would threading your keychain through the ratchet head eventually wear it out? I've had a few things wear eventually.Theoretically it might I suppose. I have a 711L mini ratchet on my keys, with a copper circle carabiner, so it is softer than the ratchet head, so it will wear before the ratchet does. So, if you are going to attach a mini ratchet to something with a carabiner, get a soft metal carabiner, like aluminium, copper, or brass, and you should be ok.
-
@ReamerPunch said:
I wouldn't say it's bulky.
I took a look at the doorknobs in my apartment. Much to my surprise, they appeared to be press-fit. None of them have any visible screws. So it'll probably be a while before I have any great need for a bit ratchet. I'll continue to follow this thread with interest, though.
-
@ReamerPunch said:
Theoretically it might I suppose. I have a 711L mini ratchet on my keys, with a copper circle carabiner, so it is softer than the ratchet head, so it will wear before the ratchet does. So, if you are going to attach a mini ratchet to something with a carabiner, get a soft metal carabiner, like aluminium, copper, or brass, and you should be ok.Thanks!!!

-
@ReamerPunch said:
So, if you are going to attach a mini ratchet to something with a carabiner, get a soft metal carabiner, like aluminium, copper, or brass, and you should be ok.Copper or brass will probably be chrome plated and that's hard. If you're worried about wear from your attachment method, only a plastic carabiner or cord seem safe. But my hunch is that wear from the carabiner is probably not the main source of failure in a ratchet.
-
I'm totally obsessed with this thread. Thank you for doing all the work.
Regarding tooth count, I get it that the higher the number the better in small spaces, but I believe that also limits the level of torque you can exert. Eg High teeth count = low torque, low teeth count = high torque.Anyone know what's the sweet spot for tooth count for these mini-ratchets? Like I totally can see why low teeth count is better for the larger ratchets.
I work in an office and occasionally use my tools so would love to hear from the super users out there.
-
@Old Boy said:
I'm totally obsessed with this thread. Thank you for doing all the work.
Regarding tooth count, I get it that the higher the number the better in small spaces, but I believe that also limits the level of torque you can exert. Eg High teeth count = low torque, low teeth count = high torque.Anyone know what's the sweet spot for tooth count for these mini-ratchets? Like I totally can see why low teeth count is better for the larger ratchets.
I work in an office and occasionally use my tools so would love to hear from the super users out there.
First of all, thank you so much for the enthusiasm.

I do not know the answer but I would also like to know.
Many ratchets come with a max torque rating, but I have not included it here because most ratchets do not list it and for many it is impossible to find.There are 40 bit ratchets reviewed in this thread so far (plus the Leatherman ratcheting adapter).

The teeth count varies from the abysmal 12 all the way to 90.
12 teeth: only one ratchet, so this is maybe considered too low.
16 teeth: 6 ratchets
36 teeth: two ratchets
38: only the Victorinox
46: only the Inwell
48: three ratchets
52 teeth: six ratchets
60 teeth: nine ratchets
72 teeth: seven ratchets
90 teeth: three ratchets16 teeth seems to be the norm with sandwich ratchets. And they work just fine. They all do. Teeth count has never been an issue for me. I do not use these to disassemble the Sydney Harbour Bridge, so they're ok. Sure, 72 or 90 teeth give a nice low angle of return if there is very limited space to swing the ratchet, but I have not encountered such a tricky fastener placement yet. Teeth count seems to be independent from price and quality. The Hazet is the most expensive and has 90 teeth, but so does the Titan. The Wera is expensive and has 60, but the Geinxurn is among the least expensive and has 72. The Mulwark has 16 and is kind of crude and cheap. The Anex also has 16 but is excellently finished and of very high quality.
Sure, the Wera is tougher than the Topeak, but it is more heavily built, so teeth count is secondary for this. The Hazet is probably the most robust, and has 90 teeth. The Stanley is also heavy built but has only 48 teeth.
The sandwich ratchets are not as resilient as one-piece ratchets, so maybe that's why 16 teeth is so common with them? Although that new Vessel sandwich ratchet is a sandwich design and has 60 teeth.
Until an expert comes along and enlightens us, all this seems to be dealer's choice.
I suggested Project Farm review mini bit ratchets, so I'm hoping we see a cool video in the future. :D -
WorkPro ratchet is in.


-
I eagerly await the review!

-
@ReamerPunch said:
I suggested Project Farm review mini bit ratchets, so I'm hoping we see a cool video in the future. :DThank you for the detailed answer. I think Project Farm is one of the best channels out there.
In my opinion I think the more teeth the better since as you said mini ratchets are more for less robust task. I say this because I had to install a battery bracket for my car one time and the Klein ratchet was the exact length of free space in the wheel well of the trunk and my back was complaining the whole time as I could only swing the ratchet a little at a time. All I could think of was how I should bought something better from your list. -
Blackburn down to $27 from $38 :ahhh
Topeak up to $45 from $31
Yeah, Blackburn has lifetime warranty, Topeak only 2 years with original receipt. If you were thinking of getting one or the other, I'd jump on the Blackburn now. Check the reviews by clicking on the buttons at the top of the page.Wera up to $35 from $32 :-
For less than double that, you can find the Tool-Check Plus (I found the Tool-Check plus 1 for $67.5). Ratchet, extension, 30 bits, 7 sockets, mini bit driver, and a holder for everything.
Or get the Tone set for $32. Same head, weight, length, 20 bits, arguably the best extension so far in this thread, and a case with belt clip.And a new PrestaCycle t-handle ratchet.

-

Pro Bike ratchet set
(Ratchet can also be found branded by Feedback, LaBear, Machoman)
Weight: 61g with no extensions
Weight: 99g with both extensions
Set weight: 195g
Length: 75mm with no extension
Head width: 17mm
Head clearance with standard bit: 33mm (adds 8mm)
Teeth count: 90
Minimum swing arc: 4°
Bit retention: magnet
Extension retention: magnet
In-line driver retention: magnet
Bit material: Chromium-Vanadium steel
Handle material: Chromium-Vanadium steel
Price: $32 with 10 bits, bit holder, 2 extensions, wallet
Bits:
Phillips 1, Torx 25, 30, Flat 4, Allen 2, 3, 4, 5, 6, 8Accessories
The Pro Bike t-handle mini ratchet comes with two small extensions, a bit holder with 10 bits, and a tiny case.
The bits are very well made and fit their respective screws properly.
The bit holder is hard plastic. A rubber one would have been a little thinner.
The case is a clamshell, crush-resistant pouch, with a zipper and a belt-loop on the back. Inside it has a mesh pocket on each side.
With everything in one side, the other side is limited to thin items like a couple of credit cards, etc.
Dimensions
The main unit is 75 mm long with no extension installed, so extremely short, and weighs 61 grams, so definitely hefty.
The entire kit in the case weighs 99 grams, which is not all that much.
Bottom right: LaBear Folding, CROM, Anvanna, Pro Bike, Railer, Engineer, Granite, Geinxurn, Klein, Milwaukee, PrestaCycle, Rujoi Flex-headTeeth Count
The ratchet has 90 teeth, which is the highest we have seen so far, tying with the Titan swivel-head and Hazet mini ratchets.
This is more important with this ratchet, because of the two inline drivers.
Even with no extension in the top inline driver, the driver extends a little from the ratchet head, compared to regular ratchets. This makes this ratchet even more prone to obstructions.Bit Retention
All bit drivers on this set have magnets. All are of above average strength, and will work just fine.Bit compatibility
No bit driver is deep enough for double-ended bits.
Regular, stubby, long, and impact bits are fine.
Switch action
The switch feels just a little weaker than average, but it still has decent detent, and does not get reversed accidentally.Ease of use
This design is set up as a t-handle ratchet, with the short extension in either end. This provides excellent torque, considerably more than regular mini ratchets we have seen.
Of course, all connections are 1/4" hex, so many configurations are possible.
This has two inline drivers, which are handy.
The ratchet has 90 teeth, and even a knurled finger wheel.
Ergonomics are perfect, and the different configurations provide a variety of grips.
Top left: Anvanna and Pro BikeConstruction Quality
Construction feels fine. There are no visible imperfections with this set. Everything is chamfered, finished properly, nice and smooth.
Everything connects firmly with negligible wobble.Portability
The set is very compact, tucking in its case nicely. The whole set with case weighs only 99 grams, and the case even has a belt loop, so this will go unnoticed on a belt or even pocket.
The ratchet main unit is only 75mm long, so it can fit in Altoids tins, edc pouches, multi-tool sheath side-sleeves, etc.
Value
At $33 this is on the higher end of mini ratchet sets, though not by much.Conclusion
There are certainly ratchet sets that cost less and come with more, but they are not of this design. This is the first t-handle design ratchet so far.
It has been executed properly, with nice quality, 90 teeth, knurled wheel, and an extremely compact package. This offers many different configurations and grips, depending on required torque, reach, or comfort. Of course, it can be used as a right-angle ratchet. The inline driver that protrudes from the ratchet head may cause some issues with obstructions, compared to regular ratchets that do not have one, but even then, an inline driver can be used for those applications.For what it is and what it offers, this is an excellent option for edc. It has many useful features and the entire set comes in an extremely unobtrusive wallet that can be on a belt.
The main ratchet unit is nice and short, so this can be assembled or disassembled accordingly, to fit in specific pouches, tins, wallets, etc.
And the bits come in a bit holder, so even if you opt to ditch the wallet, the bits can still go in a pouch in their dedicated holder, instead of having them be loose.
Naturally, this design comes with its own pros and cons, and it will be up to you as to which outweigh which. If you want a regular right-angle ratchet, this is not one of those. If you need a t-handle ratchet, this will do nicely.
Recommended.
Pros
-T-handle design provides additional torque.
-Extremely compact kit.
-Many useful features for edc (knurled wheel, 90 teeth, inline drivers, belt loop, etc).
-Many different configurations possible.Cons
-Second inline driver protrudes from ratchet head, more prone to obstructions.If you liked this ratchet, also check out:
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




















































