ARC Owners Club
-
Delicate? That’s the first time I’ve heard the ARC described that way. What happened?
-
Is that yours?
-
I wouldn’t put too much credence in an isolated report on Reddit. I don’t know what’s going on with that one, but I think it’s safe to assume that we’re not getting the whole story. I use my ARC all the time and I don’t have even a hint of that problem. I’m sure if other folks had that problem, we would be seeing a ton of complaints. There’s nothing a Leatherman fan enjoys more than complaining about Leatherman

-
I took at look at my lightly used P2 and my daily carry Arc, seems like the metal on the frame used for locking it is indeed wearing out on my Arc.
Right now it is a good thing because it makes it easier to open and close, but I could see that in the future it could cause issues with pliers locking securely.
Leatherman engineers did say the metal frame would wear out long before the elastomar fittings would wear out, and I definitely believe they did the testing
-
@Rich_SD said:
I wouldn’t put too much credence in an isolated report on Reddit.Why not?
It's a good idea to have more than one source for information and comparison.
For example, how bad is the clip on the Leatherman Alpha, I found from a source other than MultiTool.org
-
It seems that the Leatherman ARC still has issues with the Replacement Wire Cutters. (?)
-
@Vadim said:
It seems that the Leatherman ARC still has issues with the Replacement Wire Cutters. (?)Replaceable cutters will break easier than built in cutters. The advantage is that you can replace them with new cutters in minutes. When you damage the built in cutters, you need to send the whole tool in for warranty repair. Which kind is better?
That comes down to personal preference. After years of use, I'm still thorn over which I prefer.@Vadim said:
For example, how bad is the clip on the Leatherman Alpha, I found from a source other than MultiTool.orgAgain, this is a design choice, not a design flaw. The Alpha's pocket clip wiggles a little bit, but it's a quick remove clip that you can remove and replace in seconds if it's in your way. I find the "play" annoying like a lot of other folks, but it does not affect the functionality at all. Which kind is better.
Again, personal choice. -
..
-
@Rich_SD said:
Replaceable cutters will break easier than built in cutters. The advantage is that you can replace them with new cutters in minutes. When you damage the built in cutters, you need to send the whole tool in for warranty repair. Which kind is better?
That comes down to personal preference. After years of use, I'm still thorn over which I prefer.Yeah, good point, send the whole tool in for warranty repair and pay for shipping because someone decided to put in weak wire cutters,
or buy the whole set from Leatherman, just in case the cutters break, and they break very easily.
Smart move by the company against the consumer.

-
@Rich_SD said:
Again, this is a design choice, not a design flaw. The Alpha's pocket clip wiggles a little bit, but it's a quick remove clip that you can remove and replace in seconds if it's in your way. I find the "play" annoying like a lot of other folks, but it does not affect the functionality at all. Which kind is better.
Again, personal choice.Not a design flaw, more of a poor fit and finish.
The clip on the Charge moves less, on the Alpha it moves more.
-
@Vadim said:
Yeah, good point, send the whole tool in for warranty repair and pay for shipping because someone decided to put in weak wire cutters,The Swisstool's from your video (or even the Leatherman's) built in cutters are not weak. Well, compared to tool-grade wire cutters, they might be. Again, that's a trade off when using a multitool.
@Vadim said:
Not a design flaw, more of a poor fit and finish.The clip on the Charge moves less, on the Alpha it moves more.
I'll wager that I have more Charges, Waves, and Surges than you do, and that's not my experience at all. The clip on the Surge has the least play, but again, so what? If you want to complain about things that don't matter, you can find a lot of fault in anything. Oh, on the Alpha, the new clips (I have all 4) have slightly less play if something that trivial is important to you.

-
@Rich_SD said:
The Swisstool's from your video (or even the Leatherman's) built in cutters are not weak. Well, compared to tool-grade wire cutters, they might be. Again, that's a trade off when using a multitool.I said nothing about Swisstool cutters, but Leatherman replaceable cutters.
The built in Leatherman cutters are MUCH better than replaceable cutters.
@Rich_SD said:
I'll wager that I have more Charges, Waves, and Surges than you do, and that's not my experience at all. The clip on the Surge has the least play, but again, so what? If you want to complain about things that don't matter, you can find a lot of fault in anything. Oh, on the Alpha, the new clips (I have all 4) have slightly less play if something that trivial is important to you.
Slightly less play compared to what, Charge/Wave?
From the video I saw, the clip on the Alpha is horrible.
-
@Vadim said:
I said nothing about Swisstool cutters, but Leatherman replaceable cutters.Uh, your original video compared the Swisstool's built in cutters with Leatherman's replacable cutters:
@Vadim said:
It seems that the Leatherman ARC still has issues with the Replacement Wire Cutters. (?)@Rich_SD said:
Replaceable cutters will break easier than built in cutters. The advantage is that you can replace them with new cutters in minutes. **When you damage the built in cutters, you need to send the whole tool in for warranty repair. **@Vadim said:
Yeah, good point, send the whole tool in for warranty repair and pay for shipping because someone decided to put in weak wire cutters,
I thought I was helping someone that clearly had very little experience with multitools and was forming his or her opinion from internet videos. I've been tipped off that you're a troll that visits here occasionally.
Still, everything I wrote is excellent information to anyone reading this in the future. 
-
@Rich_SD said:
Replaceable cutters will break easier than built in cutters. The advantage is that you can replace them with new cutters in minutes. When you damage the built in cutters, you need to send the whole tool in for warranty repair. Which kind is better?
That's right, that's exactly what Leatherman wants, buy more and more replaceable cutters because they are weak,
or send tool for a warranty repair again and again and pay for shipping.
Which kind is better?

-
@Rich_SD said:
Uh, your original video compared the Swisstool's built in cutters with Leatherman's replacable cutters:
I thought I was helping someone that clearly had very little experience with multitools and was forming his or her opinion from internet videos. I've been tipped off that you're a troll that visits here occasionally.
Still, everything I wrote is excellent information to anyone reading this in the future. 
@Vadim said:
Excellent information?It sounds like everything Leatherman has done or is doing, good or bad, you praise it, typical for fanboy.
There is no need for personal attacks and not what we do here on MTo.
Both of you knock it off.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
