Maybe in the market for a new diver…
-
@nate j said:
Not sure about 10 bar / 100m water resistance. Seems like that may or may not end up OK. I think I’d really rather have the 20 bar / 200m minimum. Especially if I’m going to drop a couple hundred bucks (or more) on watch, I’d be mad if it ended up with water in it.I have looked on Amazon some. It’s starting to annoy me how much they push sponsored listings though, especially when the sponsored items don’t meet the search criteria.
20 bar is the new 100m, I think. In the 80's we were all jazzed "my watch can go down a football field!" Even though only elite athletes can free dive that depth.
I just figure a 20 bar watch can take not just more pressure but a bit more non-dive related punishment.
Thanks a lot fellas...
-
@ThundahBeagle said:
20 bar is the new 100m, I think. In the 80's we were all jazzed "my watch can go down a football field!" Even though only elite athletes can free dive that depth.I just figure a 20 bar watch can take not just more pressure but a bit more non-dive related punishment.
Thanks a lot fellas...
1 bar is equal to about 10 m of static water pressure, so 10 bar =100m, 20 bar =200m.
Additionally, it’s important to remember that these are static depth pressure ratings, so don’t account for movement, impact, shock loads, etc. This is why 200m is widely recommended as the standard for worry-free water wear (exclusive of SCUBA); not because anyone is free-diving to that depth.
Also note differences between “Diver’s 200m” and “200m”…
-
My diving computer is rated at 80m only. Based on the "internet" I should only use it in light rain... :)
I also have diving cameras that are rated to 25m, 40m and 60m. Unless you decide to open them underwater, they can go up to 40m, with no issue, despite what the internet says.I doubt 100m or 200m will have any practical difference, if made by decent companies. The whole thing about 100m stationary being e.g. 200m when moving assumes you are moving at super speeds. People, much more mathematically gifted than me have done the maths and there is very little difference if any for people swimming or diving. It appears to be more of a salesman story that stuck around, rather than based on anything.
There are even watches with 300m and 1000m WR, which basically makes them heavier. Tougher? Not really as they mostly use the same movements and the case may be stronger but the movement is not.
If you want tough, just get a G-shock.Basically buy what you like, and ignore the depth rating. Anything over 50m WR, from a decent maker will be fine.
-
@nate j said:
1 bar is equal to about 10 m of static water pressure, so 10 bar =100m, 20 bar =200m.Additionally, it’s important to remember that these are static depth pressure ratings, so don’t account for movement, impact, shock loads, etc. This is why 200m is widely recommended as the standard for worry-free water wear (exclusive of SCUBA); not because anyone is free-diving to that depth.
Also note differences between “Diver’s 200m” and “200m”…
Right. That much I know. Just when I was a kid, 100m was all I ever really saw or could afford. And then there is ISO compliance. Without getting into the watch specs, when you see "Divers 200m" on the face of a Seiko, that's usually ISO compliant like the skx009 Pepsi bottle for example
-
@dks said:
My diving computer is rated at 80m only. Based on the "internet" I should only use it in light rain... :)
I also have diving cameras that are rated to 25m, 40m and 60m. Unless you decide to open them underwater, they can go up to 40m, with no issue, despite what the internet says.I doubt 100m or 200m will have any practical difference, if made by decent companies. The whole thing about 100m stationary being e.g. 200m when moving assumes you are moving at super speeds. People, much more mathematically gifted than me have done the maths and there is very little difference if any for people swimming or diving. It appears to be more of a salesman story that stuck around, rather than based on anything.
There are even watches with 300m and 1000m WR, which basically makes them heavier. Tougher? Not really as they mostly use the same movements and the case may be stronger but the movement is not.
If you want tough, just get a G-shock.Basically buy what you like, and ignore the depth rating. Anything over 50m WR, from a decent maker will be fine.
Interesting stuff.
Screw down crown and case back make me feel better, though I’m not sure if it makes any practical difference.
-
To lighten up the thread, here are some photographs.
Some "diver's" and also two "pilot's" together with a "climber's"
These are all at least 200m WR and those with a metal bracelet have been used in the sea, some for diving too. Apart from the Steelflier, all are or were users and all were bought new. Best value are the Casio and the Addiesdive. The Casio has a non factory bracelet, as it came with a rubber band.The San-Martins have quickly adjustable bracelets. I do not think the others have anything similar.
Screw-down case back in all apart from the Vostok.
Remember that G-shocks do not have a screw down case back and neither does my diving computer . :)



-
Nice looking watches.

-
@Echotech said:
The 1970’s bronze diver is one of 100 from TC-9 in the UK. MTO member Peter Van Niekerk (sorry for mangling the spelling Pete) had a similar one he showed me, couldn’t resist when I saw itG'Day Echo
The TC-9 has aged beautifully!!! They are such good watches.
Nate, have a look at the Casio ProTrek / Pathfinder range too. Solar, and the Ti versions are great watches on bracelets. Most of the new ones are 200m, analogue with a digital component. I have some of the digital ones and they wear great and are tough enough for deep swimming.
+1 on Citizen eco-drive divers. They JUST work, accurate and will run for months on minimal charge. All mine are on rubber straps though.Cheers, Pete
-
@dks said:
To lighten up the thread, here are some photographs.
Some "diver's" and also two "pilot's" together with a "climber's"
These are all at least 200m WR and those with a metal bracelet have been used in the sea, some for diving too. Apart from the Steelflier, all are or were users and all were bought new. Best value are the Casio and the Addiesdive. The Casio has a non factory bracelet, as it came with a rubber band.The San-Martins have quickly adjustable bracelets. I do not think the others have anything similar.
Screw-down case back in all apart from the Vostok.
Remember that G-shocks do not have a screw down case back and neither does my diving computer . :)Very nice!
-
The TC-9 has aged beautifully!!! They are such good watches.
Nate, have a look at the Casio ProTrek / Pathfinder range too. Solar, and the Ti versions are great watches on bracelets. Most of the new ones are 200m, analogue with a digital component. I have some of the digital ones and they wear great and are tough enough for deep swimming.
+1 on Citizen eco-drive divers. They JUST work, accurate and will run for months on minimal charge. All mine are on rubber straps though.Cheers, Pete
Thanks Pete.
The Casio Protrek line looks very capable, but the styling isn’t quite what I’m after.
Citizen remains a strong contender, though I’m not thrilled with how expensive they are now.
-
@ThundahBeagle said:
That TC-9 Turtle is a real beaut!Thanks ThundahBeagle

The TC-9 has aged beautifully!!! They are such good watches.
Cheers, Pete
G'day Pete, yeah i've been really pleased with it.....have you ordered one othe 20th anniversary MTo SAK Mecahincs? They're being send to Ralph (Huntsman) for us to collect, sounds like lunch to me

-
I think I’m converging on a Citizen Promaster diver.
Looking back at my original specs vs. the models I’m considering:
-
Bracelet with extra links available - Check, and Citizen has even agreed to adjust the size for me up to what I need.
-
Solar powered - Yes, Citizen’s well-regarded Eco-Drive
-
Tool-less micro adjustment or a built-in wetsuit clasp - Yes, on the models I’m considering
-
Luminous hands and markers - check
-
All-analog display - check
-
Second hand - check
-
Day and date - Compromising here, as these have date but not day
-
Water resistance: Ideally at least 200M - Yes, Diver’s 200M
-
Size: Prefer a larger case diameter - 41mm - I’d prefer larger, but

-
Price: I was originally hoping for under $200, or even under $300 - Not quite, but I can probably get one for under $350 or so, if I can catch a 25% off sale.
-
Crystal - Strong preference for sapphire - check
Now, to pick a color, since there are 3 options:
Stainless steel, black face & bezel (BN0261-51E) - Seems like the classic, conservative choice. Similar to most of the watches I’ve owned. Offers the best contrast and readability, since the hands and markers are a pale green.
Stainless steel, blue face & bezel (BN0260-54L) - Blue seems less serious and more fun than black. But I can see myself looking at the blue and thinking, “Hmmm, kinda wish I’d gotten the black.” Harder to envision the reverse.
“Gold-tone” stainless steel, green face & bezel (BN0262-59W) - I think this looks fantastic, but have a few reservations…
“Gold-tone” stainless steel means there is a thin layer of gold or gold-colored metal on top of stainless steel. I’m fairly hard on watches, and I’m looking for something to wear daily or almost daily, hopefully for years. I would be disappointed if the “gold-tone” started to wear off/wear through after 1, or 2, or even 5+ years. I have seen watches where this has happened, and it looks like smurf IMO.
Also, I feel like it might be too flashy/gaudy/over-the-top for some occasions.
So, which color would you get, and why?

-
-
I’m a big Citizen fan Nate and reckon it’s a great choice

My dive master is 35+ years old and the dive “computer“ (not really a computer but you know what I mean) still works perfectlyAll three are nice looking watches, I always go the green option when there is one, but I too have my reservations about the gold taking scratches. The blue is classy and I’d probably choose that, the black a little plain but you’d never regret it, classic
Always a fun decision to have

-
@nate j said:
I think I’m converging on a Citizen Promaster diver.Looking back at my original specs vs. the models I’m considering:
-
Bracelet with extra links available - Check, and Citizen has even agreed to adjust the size for me up to what I need.
-
Solar powered - Yes, Citizen’s well-regarded Eco-Drive
-
Tool-less micro adjustment or a built-in wetsuit clasp - Yes, on the models I’m considering
-
Luminous hands and markers - check
-
All-analog display - check
-
Second hand - check
-
Day and date - Compromising here, as these have date but not day
-
Water resistance: Ideally at least 200M - Yes, Diver’s 200M
-
Size: Prefer a larger case diameter - 41mm - I’d prefer larger, but

-
Price: I was originally hoping for under $200, or even under $300 - Not quite, but I can probably get one for under $350 or so, if I can catch a 25% off sale.
-
Crystal - Strong preference for sapphire - check
Now, to pick a color, since there are 3 options:
Stainless steel, black face & bezel (BN0261-51E) - Seems like the classic, conservative choice. Similar to most of the watches I’ve owned. Offers the best contrast and readability, since the hands and markers are a pale green.
Stainless steel, blue face & bezel (BN0260-54L) - Blue seems less serious and more fun than black. But I can see myself looking at the blue and thinking, “Hmmm, kinda wish I’d gotten the black.” Harder to envision the reverse.
“Gold-tone” stainless steel, green face & bezel (BN0262-59W) - I think this looks fantastic, but have a few reservations…
“Gold-tone” stainless steel means there is a thin layer of gold or gold-colored metal on top of stainless steel. I’m fairly hard on watches, and I’m looking for something to wear daily or almost daily, hopefully for years. I would be disappointed if the “gold-tone” started to wear off/wear through after 1, or 2, or even 5+ years. I have seen watches where this has happened, and it looks like smurf IMO.
Also, I feel like it might be too flashy/gaudy/over-the-top for some occasions.
So, which color would you get, and why?

I'm a bad reference point for your color selection. I've been eyeing up the BN0264-53E. Meets your specs but not your price point, by a fair margin. Sounds like your last color choice would be my first.

I have the sibling to the NY0155-58X with fully lumed face. Mine is not and I regret not getting the NY0155-58X as mine is white faced. But both of those are automatics, not solar powered so also not meeting your criteria. The lume on my Citizen is second only to the Zelos watches I own (I don't believe they make any solar watches).
From your post black on black is the way to go. You'll second guess yourself on the other two, the gold not being you at all. Blue is interesting but probably the most common of watch face colors out there. Seems like you're looking for a true tool watch and the best readability of the bunch. I have a couple of watches I'll be parting with because as I age my eyesight ain't so great, even for an analog watch and in poor light, pfft, forget it.
Good luck, good sir.
-
-
@nate j said:
I think I’m converging on a Citizen Promaster diver.Looking back at my original specs vs. the models I’m considering:
-
Bracelet with extra links available - Check, and Citizen has even agreed to adjust the size for me up to what I need.
-
Solar powered - Yes, Citizen’s well-regarded Eco-Drive
-
Tool-less micro adjustment or a built-in wetsuit clasp - Yes, on the models I’m considering
-
Luminous hands and markers - check
-
All-analog display - check
-
Second hand - check
-
Day and date - Compromising here, as these have date but not day
-
Water resistance: Ideally at least 200M - Yes, Diver’s 200M
-
Size: Prefer a larger case diameter - 41mm - I’d prefer larger, but

-
Price: I was originally hoping for under $200, or even under $300 - Not quite, but I can probably get one for under $350 or so, if I can catch a 25% off sale.
-
Crystal - Strong preference for sapphire - check
Now, to pick a color, since there are 3 options:
Stainless steel, black face & bezel (BN0261-51E) - Seems like the classic, conservative choice. Similar to most of the watches I’ve owned. Offers the best contrast and readability, since the hands and markers are a pale green.
Stainless steel, blue face & bezel (BN0260-54L) - Blue seems less serious and more fun than black. But I can see myself looking at the blue and thinking, “Hmmm, kinda wish I’d gotten the black.” Harder to envision the reverse.
“Gold-tone” stainless steel, green face & bezel (BN0262-59W) - I think this looks fantastic, but have a few reservations…
“Gold-tone” stainless steel means there is a thin layer of gold or gold-colored metal on top of stainless steel. I’m fairly hard on watches, and I’m looking for something to wear daily or almost daily, hopefully for years. I would be disappointed if the “gold-tone” started to wear off/wear through after 1, or 2, or even 5+ years. I have seen watches where this has happened, and it looks like smurf IMO.
Also, I feel like it might be too flashy/gaudy/over-the-top for some occasions.
So, which color would you get, and why?

No kidding I just had one in my hands today as I dropped off one of my Orient Perpetual Calendars for repair. He only sells Luminox and Citizen, and there was the Promaster Eco Diver.
Very light. Felt much lighter than the G-Shock GST-S110 I was wearing at the time but much more legible with the black dial and white markings and hands. Everything stood out nicely especially the seconds hand. ISO 6425.
Really nice piece for $350, and he was offering 25% off of that so I could have walked out of there with it for $263 plus tax. Certainly less than a questionable, "near mint" SKX007 plus $100 shipping from Japan off of eBay.
Unfortunately I have some serious truck engine repair with the initial tear down this week, so I have to hold off. But although I am into automatic movement, this Eco Drive felt as light as my G-Shock G100 (hard to believe THESE are up around $100 or more now) and, like it, requires nothing to just put it on and go!
I think it would be a great choice. I liked the black, but I could see going for the dark blue as well. Anything else in this particular platform would seem strange, like more of a statement than a tool like this is meant to be.
-
-
I am going to wish you the best of luck with the eco drive citizen. I have had 2 failures in the past. both being on Promaster pilot watches. Maybe they have improved it lately. Never had issues with any other solar watch brand.
-
@kirk13 said:
Nate, while they won't meet a number of your requirements , have you had a look at Steeldiver and Addiesdive on AliExpress? They get good reviews on a number of FB watch groups and the start point on the prices aren't bad.I've not got any personal experience of Addiesdive ( dive style watches not being my thing, well not yet anyway), but I did order a Steelflier Dirty Dozen homage for around the £40 mark, and its stunning
What I find very interesting is that one Chinese knockoff brand is distancing itself from another Chinese knockoff brand for stealing their designs and logos. Well, not knock-off per se, since they aren't attaching the Seiko name to their Turtles. But it is interesting. No problem undercutting Seiko but dang it, when AddiesDive undercut SteelDive, the gloves were off.
Still, I wouldn't mind trying either one especially since DKS finds them suitable to the task and undoubtedly has more real dive experience than me. I just swim at the beach and deepest I go is snorkeling
-
@Echotech said:
All three are nice looking watches, I always go the green option when there is one, but I too have my reservations about the gold taking scratches. The blue is classy and I’d probably choose that, the black a little plain but you’d never regret it, classicI think you’re probably right about never regretting the black.
Have you had any experiences with their gold coating?
@buggs said:
I'm a bad reference point for your color selection. I've been eyeing up the BN0264-53E. Meets your specs but not your price point, by a fair margin. Sounds like your last color choice would be my first.
From your post black on black is the way to go. You'll second guess yourself on the other two, the gold not being you at all. Blue is interesting but probably the most common of watch face colors out there. Seems like you're looking for a true tool watch and the best readability of the bunch.
Looks like the BN0264-53E is essentially the same watch as the others, but in a limited edition color.
@ThundahBeagle said:
No kidding I just had one in my hands today as I dropped off one of my Orient Perpetual Calendars for repair. He only sells Luminox and Citizen, and there was the Promaster Eco Diver.Very light. Felt much lighter than the G-Shock GST-S110 I was wearing at the time but much more legible with the black dial and white markings and hands. Everything stood out nicely especially the seconds hand. ISO 6425.
Really nice piece for $350, and he was offering 25% off of that so I could have walked out of there with it for $263 plus tax.
I think it would be a great choice. I liked the black, but I could see going for the dark blue as well. Anything else in this particular platform would seem strange, like more of a statement than a tool like this is meant to be.
As I was reading the reviews on the Citizen website, I ran across several that said things like “Glad they made a diver that isn’t huge” and “looks great on my 7-inch wrist”. I did want something bigger, but was prepared to accept this 41mm case diameter for a watch that hit so many of the specs I wanted. But now I’m wondering if it will look like a toy or otherwise appear silly on my 10+” wrist. Having seen one in person, what’s your take on the size?
@Chako said:
I am going to wish you the best of luck with the eco drive citizen. I have had 2 failures in the past. both being on Promaster pilot watches. Maybe they have improved it lately. Never had issues with any other solar watch brand.Wow, that’s disappointing! I can see how multiple failures would make you leery of the brand. I have an older Citizen PCAT that has been solid for years, and they seem to have a pretty good reputation overall. Hoping yours were the rare lemons that snuck past QC, and not part of a larger trend.
I might very well go with the gold & green (let’s face it, something like this is as close as I’ll likely ever come to a real gold watch), if I could get a warm and fuzzy feeling that I would never have any issues with wear through or scratch through of the coating, but I just don’t have that feeling at present. I suppose I could pull the trigger on this one, and relegate it to beater status if the coating ever showed any issues.
As several folks have pointed out, black is classic and probably the safest choice.
So maybe I can make some progress and cross off the blue?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
