SAK Stack Challenge 2026
-
That works for me.
My only problem is... I need to organize which one I'm going to use first the Cybertool or something 6 layers and larger first. Or should I go with the largest layer size back down to 6 layers and then the Cybertool.
I better hurry though because we're only 7 days away from finishing up the Barlow challenge and I'm not ready for this one.
Ahhhh!!!!

-
@AzteCypher said:
That works for me.My only problem is... I need to organize which one I'm going to use first the Cybertool or something 6 layers and larger first. Or should I go with the largest layer size back down to 6 layers and then the Cybertool.
I better hurry though because we're only 7 days away from finishing up the Barlow challenge and I'm not ready for this one.
Ahhhh!!!!

I'm sure you will think of something! 
-
So, to reiterate: if you go to SAKwiki, along the right side of the page, each basic size/family is listed from largest to smallest, by manufacturer. Out from each size is a layer list: 1, 2, 3, 4, 5, and +. Some sizes only go as high as 3 or even 2 layers. The only ones that have a "+" are Victorinox 111mm and 91mm, and Wenger 85mm. There are also some "+" layers under 85mm Delemonte collection; those are good too. They're just Wenger designs that were produced after the Victorinox takeover.
I've looked at everything listed under the "+" layers, and found only one that would probably be disqualified. That one is the Wenger SGT Shortix Plus. If you look at it, you will see why. Of course if you happen to have one in your collection and really want to use it, it might be possible to make an exception. Especially if you happen to have SGT gas chromatography equipment and plan to use it to maintain that.

After all, it is large and heavy enough.Outside of the "+" layer SAKs, any Cybertool qualifies.
-
got it.... -
I'm super duper excited for this challenge. I keep looking at the Swiss Champ on my kitchen table with longing... of course, I'll miss my Barlows when I'm on the other side of it!
-
I'll miss the Barlows as well. I'm going to have to do a month or two of no challenges just so I can carry my Barlows again.

-
I like my Swisschamp so much that I bought another, much older one.

-
Excited for this one and glad any Cybertool variant counts. I am traveling out of country in early November and th
the Cybertool 29/S will be a safer option to bring vs oneof my larger ones. But over 60 days, I will get a chance to use them all. -
@MrToolJunkie said:
Excited for this one and glad any Cybertool variant counts. I am traveling out of country in early November and th
the Cybertool 29/S will be a safer option to bring vs oneof my larger ones. But over 60 days, I will get a chance to use them all.
-
I've checked the (+) on SakWiki and I'm good to go. Mainly I'll use my SwissChamps, but I have some other cool SAK that qualify and they don't get much use. If I fail, it won't be the first time I face planted on a challenge.

- WECSOG (60)
- IMR4198 (30)
- Barry Rowland (30 tentative)
- AzteCypher (60!!!)
- MTSAK (60)
- Yanossauro
- JonesE (30 tentative)
- Echotech (60)
- nakken (30)
- mathmitch7 (60)
- UscgSal (30)
- LoopCutter (30). (SwissChamp)
- BPRoberts (30)
- MrToolJunkie (60)
- Alan K. (30 up to 60)
- Fireman (30)
-
@Fireman said:
I've checked the (+) on SakWiki and I'm good to go. Mainly I'll use my SwissChamps, but I have some other cool SAK that qualify and they don't get much use. If I fail, it won't be the first time I face planted on a challenge.
- WECSOG (60)
- IMR4198 (30)
- Barry Rowland (30 tentative)
- AzteCypher (60!!!)
- MTSAK (60)
- Yanossauro
- JonesE (30 tentative)
- Echotech (60)
- nakken (30)
- mathmitch7 (60)
- UscgSal (30)
- LoopCutter (30). (SwissChamp)
- BPRoberts (30)
- MrToolJunkie (60)
- Alan K. (30 up to 60)
- Fireman (30)
Good deal! Looking forward to see what you bring to the table.
-
- WECSOG (60)
- IMR4198 (30)
- Barry Rowland (30 tentative)
- AzteCypher (60!!!)
- MTSAK (60)
- Yanossauro
- JonesE (30 tentative)
- Echotech (60)
- nakken (30)
- mathmitch7 (60)
- UscgSal (30)
- LoopCutter (30). (SwissChamp)
- BPRoberts (30)
- MrToolJunkie (60)
- Alan K. (30 up to 60)
- Fireman (30)
- Miicat_47 (30)
-
@Miicat_47 said:
- WECSOG (60)
- IMR4198 (30)
- Barry Rowland (30 tentative)
- AzteCypher (60!!!)
- MTSAK (60)
- Yanossauro
- JonesE (30 tentative)
- Echotech (60)
- nakken (30)
- mathmitch7 (60)
- UscgSal (30)
- LoopCutter (30). (SwissChamp)
- BPRoberts (30)
- MrToolJunkie (60)
- Alan K. (30 up to 60)
- Fireman (30)
- Miicat_47 (30)
Welcome!
-
I will follow this challenge to see uses on big tools, its awlways interesting to see what kinda pictures and uses everyone does
-
I would like to join this one - great opprtunity to carry something bigger than my usual single layers:
- WECSOG (60)
- IMR4198 (30)
- Barry Rowland (30 tentative)
- AzteCypher (60!!!)
- MTSAK (60)
- Yanossauro
- JonesE (30 tentative)
- Echotech (60)
- nakken (30)
- mathmitch7 (60)
- UscgSal (30)
- LoopCutter (30). (SwissChamp)
- BPRoberts (30)
- MrToolJunkie (60)
- Alan K. (30 up to 60)
- Fireman (30)
- Miicat_47 (30)
- z1913 (30 up to 60)
-
Something I've awlways done for this challenge is track:
-
Approximately how often do I use each tool (once or twice total, most weeks, most days, etc.)
-
What was them most interesting use for each one.
It's neat to see what "weird" tool you actually use awl the time (it's the fish scaler!), and see if you can fill the bingo card.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


