Applying new scales..
-
Thanks for the how to. I ran into a small problem with my side lock Adventurer.
There is a very small, v shaped spring in the lock, that rest in the scale. Beware, that rascal is hard to find if you drop it. Once the spring was found it was a snap to do. I now have shiny new scales on my Adventurer, and some blue sapphire scales on my Champion. I used a small hobby vise to press the scales on.
Thanks again :D -
-
Cant you just use bear hands like when crushing walnuts :D
-
Looks about right, and its how I do it. Costume hands and all. :D
-
Cant you just use bear hands like when crushing walnuts :D
Bear hands???


-
Were did the pictures go
:ahhh :ahhh.Do I need a 'Hulk' to help me ?
Is a 'Barney' required?Seriously WTF happened to the 'instructional' pics

-
Maybe a Mod could copy these to the first reply..
:D
-
Thanks Allan
.
What is the best glue to use when putting on used scales , Goop glue is not available in OZ

-
@MultiMat said:
Thanks Allan
.
What is the best glue to use when putting on used scales , Goop glue is not available in OZ

If you want to stick them on forever than I've used a two-part epoxy before. I've also used Superglue but I have had this form a dimple in the scale over the pin where the glue seems to have slightly softened the cellidor. I've had a thought that it might depend on the brand of superglue as to whether this happens or not (slightly different formula's perhaps ???) but that's only a guess. Most I've used have been fine.
-
Great thread and pics. This is one of the threads that got me started modding SAKS. :D
Mat last mods i did i reused scales i reinstalled the scales with no glue and they held fine. Might be worth a try.
Mike -
Just remember to clean the brass pins with some steelwool ect. if you're
applying those see-through translucent scales on older SAKs..
-
-
@AHB said:
Just remember to clean the brass pins with some steelwool ect. if you're
applying those see-through translucent scales on older SAKs..
Or, if you're a bit of a tart, polish them and make little patterns on them to show through :P
A perfect example of not knowing when to stop me thinks :-[
-
Just remember to clean the brass pins with some steelwool ect. if you're
applying those see-through translucent scales on older SAKs..
Or, if you're a bit of a tart, polish them and make little patterns on them to show through :P

A perfect example of not knowing when to stop me thinks :-[Tart or not, that's a great piece of work..

-
So, I just tried this out with the stock scales on my Recruit...seems like they just pop right on and off? Do you really need glue on there? It seems pretty sturdy as it is ???
-
@markn951 said:
So, I just tried this out with the stock scales on my Recruit...seems like they just pop right on and off? Do you really need glue on there? It seems pretty sturdy as it is ???If it's new scales you don't need glue, but if you're reusing old scales you might wanna use a bit, just to make sure.. :)
-
So, I just tried this out with the stock scales on my Recruit...seems like they just pop right on and off? Do you really need glue on there? It seems pretty sturdy as it is ???
If it's new scales you don't need glue, but if you're reusing old scales you might wanna use a bit, just to make sure.. :)
mate!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
