Spirit Review (As seen on Messenforum.nl)
-
@Mr. Whippy said:
Nice write up!BTW, that Rally multi-function driver/opener/stripper is an awesome thing. The magnetized Phillips head is extremely good (and not at all slippery ;))
I gotta start carrying my Spirit more. I have a hard time working it over though--it's so pretty. :ahhh
See? That's the difference... Some people just love working over pretty things... :P :D
-
Nice score and review!
I love my Spirit and this won't be the last time I say that either. ;)
The spirit is the first MT that convinced me to EDC a MT. Even though I have Gerbers, LM Wave, Skeletool, a few SOG's and even its big brother the SwissTool. The Spirit with its combination of size, comfort, ergonomics, capabilities and drop-dead good looks inspired me to EDC it.
-
Nice write up and photos!

Although you can use the "medium flat head" on the can opener for slotted screws, I think it is actually a phillips driver.
I find it often works better than the "proper" phillips head on smaller screws.

-
-
@Nightshade said:
Great photos and review!!!
Don't be afraid of using a Spirit. They can take it. :D
I have been put one through it's paces. Been using it for the past 13 months and it has put my old favorites on the bench. I like the tool so much I have purchased two spares.
BO Spirit is nice. :3 -
How consistant is the BO finish?
-
The Bo finish on my Spirit S feels more like DLC than anything else. I use it almost daily and the only real worn spots are on the rivets.
-
@Nightshade said:
Great photos and review!!!
Don't be afraid of using a Spirit. They can take it. :D
I have been put one through it's paces. Been using it for the past 13 months and it has put my old favorites on the bench. I like the tool so much I have purchased two spares.Man that thing looks worked over. The first pic I've seen of a Spirit that actually looks like the tool gets used for something. I just found my Spirit's first battle scar today. A couple of fairly deep gouges on the small flat head. I've never used that tool so I can't even figure out how they got there. At first I was kinda upset that my precious Spirit was no longer pristine. On the other hand, I don't have to be afraid to use the thing any more. Time to start really putting it through it's paces I guess :D
-
@Nightshade said:
Great photos and review!!!
Don't be afraid of using a Spirit. They can take it. :D
I have been put one through it's paces. Been using it for the past 13 months and it has put my old favorites on the bench. I like the tool so much I have purchased two spares.Hows the phillips driver holding up ? All my one on my Swisstools get chewed up quite easily .Any chance of a close up pic ?
Dunc
-
Great photos and review!!!

Don't be afraid of using a Spirit. They can take it. :D
I have been put one through it's paces. Been using it for the past 13 months and it has put my old favorites on the bench. I like the tool so much I have purchased two spares.Hows the phillips driver holding up ? All my one on my Swisstools get chewed up quite easily .Any chance of a close up pic ?
Dunc
Could that be because you use them on pozidrive screws?
-
It's because they are all slippery. :P
-
@american lockpicker said:
Great photos and review!!!

Don't be afraid of using a Spirit. They can take it. :D
I have been put one through it's paces. Been using it for the past 13 months and it has put my old favorites on the bench. I like the tool so much I have purchased two spares.Hows the phillips driver holding up ? All my one on my Swisstools get chewed up quite easily .Any chance of a close up pic ?
Dunc
Could that be because you use them on pozidrive screws?
I use it on any screw it will fit . The same as I do with any other brand .
Dunc
-
Well that shouldn't be a problem for me. Here in a week or so my bit kit will arive and I'll be EDCing a Schroder screwdriver.
-
Hows the phillips driver holding up ? All my one on my Swisstools get chewed up quite easily .Any chance of a close up pic ?
Dunc
[/quote]Dunc,
It's holding up well. The Vic phillips profile is a compromise, as are all of the MT manufacturers. :) I do like the steel used for the Swisstools. The steel has a tendency to flex and bend a bit when being pushed too hard. It's a clear and certain warning to stop and find a dedicated tool. I like that as opposed to some of the other multitools that are of a more "brittle" nature.
Edited to add a photo, and to exhibit horrid photography skills.

-
@Nightshade said:
Hows the phillips driver holding up ? All my one on my Swisstools get chewed up quite easily .Any chance of a close up pic ?Dunc
Dunc,
It's holding up well. The Vic phillips profile is a compromise, as are all of the MT manufacturers. :) I do like the steel used for the Swisstools. The steel has a tendency to flex and bend a bit when being pushed too hard. It's a clear and certain warning to stop and find a dedicated tool. I like that as opposed to some of the other multitools that are of a more "brittle" nature.
Edited to add a photo, and to exhibit horrid photography skills.

[/quote]
I love to edc my cybertool along with the spirit, so the phillips thing is usually not an issue for me. Although today I found a particularly stubborn little smurf screw that chewed it up a little, and since my cybertool is still in Rotokid's shop getting some upgrades, I had to use the spirit. I eventually got up and went to find a dedicated screwdriver as my work doesn't pay for my multi's.
Also, LM has particularly brittle tools, they actually shatter if you do it right!
-
good review ,

-
@gadgetguy35 said:
The steel has a tendency to flex and bend a bit when being pushed too hard. It's a clear and certain warning to stop and find a dedicated tool. I like that as opposed to some of the other multitools that are of a more "brittle" nature.I have noticed this when using my Spirit "hard" and like you "backed off."
a good point to make
-
I still dont get the blade on it? It is just strange..
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


