2010 SHOT Show- CRKT Booth
-
Prying and such looks to me as an accident waiting to happen with that sharp edge at the end. Or am I overlooking something here

-
@zepla said:
Prying and such looks to me as an accident waiting to happen with that sharp edge at the end. Or am I overlooking something here
You leave the sheath on. :D
Okay, good. I thought the bit holder was raised on one side but now I see it's a cut out.
Definitely want one! The MSRP is what, $20?!

-
I'm pretty certain it is around the $20 level, and at that price point I think this is an exceptional tool.
Def
-
I already can see me with that beauty in my hand!
in the left and, soaked in blood, after I gave too much torque and the bit slipped out of the hex hole.
-
In my second year at secondary school (i.e. around 14 years old) we had to make a multitool from a flat rectangular slab of steel. Great fun, and the end results ended up like this (obviously not exactly like this, since we were 14 year olds, but they all had a sharp edge, and similar stuff).
Dunno where mine has gone, sure it must be around somewhere.
-
@sardauker said:
I already can see me with that beauty in my hand!in the left and, soaked in blood, after I gave too much torque and the bit slipped out of the hex hole.
Yeah... I'm probably going to avoid using it as a bit driver. :D
And making sure I go over that sheath and it's nice and tight.
-
All these new CRKT toys are on preorder on knifecenter.com
And they are CHEAPER THAN DIRT! Great prices CRKT!
-
@Woz said:
All these new CRKT toys are on preorder on knifecenter.comAnd they are CHEAPER THAN DIRT! Great prices CRKT!
aeraih-nkakldsna;gldskgj
Must save money.
saghinfdlihndlafi;jgmasdlfnmgldsfknhsgfdlskngelharinomdg oiansgdlni eroihn onl nre hlinlkfd
-
@Woz said:
All these new CRKT toys are on preorder on knifecenter.comAnd they are CHEAPER THAN DIRT! Great prices CRKT!
Regarding the Bear Paw Eat'n Tool: This from CRKT's description:
Our Eat’N Tool is the brainchild of New York City designer Liong Mah. At first glance it looks like the familiar spoon/fork “spork” combination, but Liong has used his ingenuity and computer-aided design skills to create a lightweight, high-tech outdoor tool.
Guess the version we saw earlier was a copy of Liong Mah's work...

-
Heck with the spork. I want that Ta Bar!
-

That's how you hold it!
-
You know, I'm quite happily surprised at the prices... with their costs so affordable, it'll definitely put me toward getting one. o.o
-
The Ta-Bar is yet another item to get this year..

-
I'm not sure how a person is supposed to properly hold onto it in ordinary food-stabbing situations....?
you put your finger in the hole?

Yup. Just stick your finger in the hole....and it's a defensive weapon. ever been sporked to death. It's actually comfortable enough, but if you hit the guy in the face wrong you might bust a finger.
-
Hey those are cool. thanks for posting them. Now i need to go track down some of their cool knives.
-
I'm not sure how a person is supposed to properly hold onto it in ordinary food-stabbing situations....?
you put your finger in the hole?

Yup. Just stick your finger in the hole....and it's a defensive weapon. ever been sporked to death. It's actually comfortable enough, but if you hit the guy in the face wrong you might bust a finger.
Yeah, it's an odd design, but still kinda neat. The guys at CRKT are always coming up with some weird designs. For example, this knife's handle is made completely from a single piece of sheet metal, including the lock!

It's an amazing piece, but I have to wonder just what the hell they put in the water over there, or what kinds of "spices" the folks in the CRKT Cafateria are using!

Next thing you know, they are going to be making knives like this!

:D
Def
-
@Grant Lamontagne said:
I'm not sure how a person is supposed to properly hold onto it in ordinary food-stabbing situations....?
you put your finger in the hole?

Yup. Just stick your finger in the hole....and it's a defensive weapon. ever been sporked to death. It's actually comfortable enough, but if you hit the guy in the face wrong you might bust a finger.
Yeah, it's an odd design, but still kinda neat. The guys at CRKT are always coming up with some weird designs. For example, this knife's handle is made completely from a single piece of sheet metal, including the lock!

It's an amazing piece, but I have to wonder just what the hell they put in the water over there, or what kinds of "spices" the folks in the CRKT Cafateria are using!

Next thing you know, they are going to be making knives like this!

:D
Def
I think that their plant must be located near the out put of a nuclear power plant. So what's the price on the wood knife. Very cool knife BTW. Looks pretty far out. I think it was called the NIRK. Looks very solid and not too fat inyour pocket.
-
Yup! The NIRK. Planning to pick one up myself. CRKT very much appeals to my OHMYGODOHMYGODWHATTHEHELLISTHISTHINGIWANITSOBADGIMMEGIMMEGIMME side.
-
I didn't get a price on the wood knife unfortunately, as I'd love to get a nice partially serrated tac folder like that, only maybe made all out of G-10 or micarta! :D
Frog, with an MSRP of about $30, it won't be too hard to appeal to that side of yourself!
Columbia River Knife and Tool says this about the NIRK:
Intelligent design advocate Michael Behe coined the term "irreducible complexity," which means "a single system composed of several wellmatched, interacting parts that contribute to the basic function of the system, wherein the removal of any one of the parts causes the system to effectively cease functioning." It certainly describes this new folder by Glenn Klecker, award-winning knife and tool designer from Silverton, Oregon. He has named it after his son: Nathan's IRreducible complexity Knife, or NIRK™. There are just two well-thoughtout pieces, plus a blade pivot screw.
The innovation is Glenn's use of a single sheet of stamped and folded stainless steel to serve as the folder frame, back spacer, spring and lock, resulting in a solid lockback folder. The geometry of the cutout areas is critical, carefully calculated to provide just the right spring action when the rear of the spine is pressed.
At the front of the frame, the lock tab mates with a notch in the blade to provide safe lockup. The tighter the grip on the handle, the tighter the lockup, making this an exceptionally safe design. It is very difficult, if not impossible, to accidentally release the lock, and it is very, very strong.
When the blade is closed, the same lock tab ramps over a rounded detent to hold the blade in the closed position.
The high-carbon stainless steel blade is a utilitarian drop point shape with a deep belly, high hollow ground for easy cutting, and with a swedged top edge to aid penetration. It is a hefty 0.131" thick. The blade can be opened with either hand using the oval thumb hole.
The 5180 sport and work model has a high satin blade finish, brushed frame and Razor-Sharp cutting edge.
The NIRK has a stainless steel pocket/gear clip.
There you have it: a simple, flat, almost indestructible folder. All you need to do is oil and sharpen it occasionally and you have a friend for life. It is priced so you can afford several: one for the toolbox, one for the backpack, one for the truck, one for the boat, one for the survival kit.
In the knife world, it is a fine example of intelligent design.
Specifications* Blade: Length: 3.125" (79 mm) * Thickness: 0.131" (3.3 mm) * Steel: 3Cr13, 51-53 HRC * Closed: Handle length: 4.50" (114 mm) * Open: Overall length: 7.63" (194 mm) * Weight: 3.5 oz. (99 g)*What do I have to say about the NIRK? It looks cool, and is at a great price. It's inexpensive enough that I won't have a problem getting one to try it out, and I don't think anyone else should either. Whether it's a "good" knife or not, it's a fantastic piece of artwork, and shows what mankind has advanced to- I can't imagine anyone trying something like this even ten years ago, let alone actually making it work. The lock up was solid on the test pieces I looked at and the blade rotated into position smoothly. As far as the user is concerned, it functions similar to a back lock since you push down on the "button" in the spine to release it. The actual workings of the lock are somewhat different as you are actually flexing the sheet metal of the handle/frame to release it. It's really amazing to look at and play with.
What I'm wondering is, whether or not it will survive long in regular pocket carry- will the sheet metal handle stay intact or will it get crushed? It seemed reasonably stable when I played with it at the show, but I'm looking forward to some "real world" type testing. Of course, even if it does bend inward a bit, it probably wouldn't be hard to bend back out.
Def
-
You pinpointed everything I liked about it when I saw it in the catalouge. :D
I figure it's nice and slim and riding at the top of the pocket probably don't bang against other stuff. We'll see, we will see!
I wonder if I can convince myself to buy all these toys any time soon...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login