2010 SHOT Show- CRKT Booth
-
The Ta-Bar is yet another item to get this year..

-
I'm not sure how a person is supposed to properly hold onto it in ordinary food-stabbing situations....?
you put your finger in the hole?

Yup. Just stick your finger in the hole....and it's a defensive weapon. ever been sporked to death. It's actually comfortable enough, but if you hit the guy in the face wrong you might bust a finger.
-
Hey those are cool. thanks for posting them. Now i need to go track down some of their cool knives.
-
I'm not sure how a person is supposed to properly hold onto it in ordinary food-stabbing situations....?
you put your finger in the hole?

Yup. Just stick your finger in the hole....and it's a defensive weapon. ever been sporked to death. It's actually comfortable enough, but if you hit the guy in the face wrong you might bust a finger.
Yeah, it's an odd design, but still kinda neat. The guys at CRKT are always coming up with some weird designs. For example, this knife's handle is made completely from a single piece of sheet metal, including the lock!

It's an amazing piece, but I have to wonder just what the hell they put in the water over there, or what kinds of "spices" the folks in the CRKT Cafateria are using!

Next thing you know, they are going to be making knives like this!

:D
Def
-
@Grant Lamontagne said:
I'm not sure how a person is supposed to properly hold onto it in ordinary food-stabbing situations....?
you put your finger in the hole?

Yup. Just stick your finger in the hole....and it's a defensive weapon. ever been sporked to death. It's actually comfortable enough, but if you hit the guy in the face wrong you might bust a finger.
Yeah, it's an odd design, but still kinda neat. The guys at CRKT are always coming up with some weird designs. For example, this knife's handle is made completely from a single piece of sheet metal, including the lock!

It's an amazing piece, but I have to wonder just what the hell they put in the water over there, or what kinds of "spices" the folks in the CRKT Cafateria are using!

Next thing you know, they are going to be making knives like this!

:D
Def
I think that their plant must be located near the out put of a nuclear power plant. So what's the price on the wood knife. Very cool knife BTW. Looks pretty far out. I think it was called the NIRK. Looks very solid and not too fat inyour pocket.
-
Yup! The NIRK. Planning to pick one up myself. CRKT very much appeals to my OHMYGODOHMYGODWHATTHEHELLISTHISTHINGIWANITSOBADGIMMEGIMMEGIMME side.
-
I didn't get a price on the wood knife unfortunately, as I'd love to get a nice partially serrated tac folder like that, only maybe made all out of G-10 or micarta! :D
Frog, with an MSRP of about $30, it won't be too hard to appeal to that side of yourself!
Columbia River Knife and Tool says this about the NIRK:
Intelligent design advocate Michael Behe coined the term "irreducible complexity," which means "a single system composed of several wellmatched, interacting parts that contribute to the basic function of the system, wherein the removal of any one of the parts causes the system to effectively cease functioning." It certainly describes this new folder by Glenn Klecker, award-winning knife and tool designer from Silverton, Oregon. He has named it after his son: Nathan's IRreducible complexity Knife, or NIRK™. There are just two well-thoughtout pieces, plus a blade pivot screw.
The innovation is Glenn's use of a single sheet of stamped and folded stainless steel to serve as the folder frame, back spacer, spring and lock, resulting in a solid lockback folder. The geometry of the cutout areas is critical, carefully calculated to provide just the right spring action when the rear of the spine is pressed.
At the front of the frame, the lock tab mates with a notch in the blade to provide safe lockup. The tighter the grip on the handle, the tighter the lockup, making this an exceptionally safe design. It is very difficult, if not impossible, to accidentally release the lock, and it is very, very strong.
When the blade is closed, the same lock tab ramps over a rounded detent to hold the blade in the closed position.
The high-carbon stainless steel blade is a utilitarian drop point shape with a deep belly, high hollow ground for easy cutting, and with a swedged top edge to aid penetration. It is a hefty 0.131" thick. The blade can be opened with either hand using the oval thumb hole.
The 5180 sport and work model has a high satin blade finish, brushed frame and Razor-Sharp cutting edge.
The NIRK has a stainless steel pocket/gear clip.
There you have it: a simple, flat, almost indestructible folder. All you need to do is oil and sharpen it occasionally and you have a friend for life. It is priced so you can afford several: one for the toolbox, one for the backpack, one for the truck, one for the boat, one for the survival kit.
In the knife world, it is a fine example of intelligent design.
Specifications* Blade: Length: 3.125" (79 mm) * Thickness: 0.131" (3.3 mm) * Steel: 3Cr13, 51-53 HRC * Closed: Handle length: 4.50" (114 mm) * Open: Overall length: 7.63" (194 mm) * Weight: 3.5 oz. (99 g)*What do I have to say about the NIRK? It looks cool, and is at a great price. It's inexpensive enough that I won't have a problem getting one to try it out, and I don't think anyone else should either. Whether it's a "good" knife or not, it's a fantastic piece of artwork, and shows what mankind has advanced to- I can't imagine anyone trying something like this even ten years ago, let alone actually making it work. The lock up was solid on the test pieces I looked at and the blade rotated into position smoothly. As far as the user is concerned, it functions similar to a back lock since you push down on the "button" in the spine to release it. The actual workings of the lock are somewhat different as you are actually flexing the sheet metal of the handle/frame to release it. It's really amazing to look at and play with.
What I'm wondering is, whether or not it will survive long in regular pocket carry- will the sheet metal handle stay intact or will it get crushed? It seemed reasonably stable when I played with it at the show, but I'm looking forward to some "real world" type testing. Of course, even if it does bend inward a bit, it probably wouldn't be hard to bend back out.
Def
-
You pinpointed everything I liked about it when I saw it in the catalouge. :D
I figure it's nice and slim and riding at the top of the pocket probably don't bang against other stuff. We'll see, we will see!
I wonder if I can convince myself to buy all these toys any time soon...

-
The NIRK was definitely an intriguing design. As Grant stated above, the entire handle (including lock) is stamped from a single piece of sheet metal. Pushing down at the spot indicated below causes the handle spine to flex, lifting the lock sear and releasing the blade. Pretty cool! 8)

Its neat how a mechanism that looks so complex can actually be so simple. :)
-
Yes, it is another piece and the screw to hold it in is yet another! When talking to the designer, he mentioned that he'd planned to actually fit the pocket clip into the design, by adding a long strip of metal to the end of the handle and folding it over, but for some reason (I can't remember why) they went with the screwed on version. If Bob doesn't remember why they went this route I'll check with the designer again and see if I can convince him to repeat it! :D
Def
-
@Grant Lamontagne said:
Yes, it is another piece and the screw to hold it in is yet another! When talking to the designer, he mentioned that he'd planned to actually fit the pocket clip into the design, by adding a long strip of metal to the end of the handle and folding it over, but for some reason (I can't remember why) they went with the screwed on version. If Bob doesn't remember why they went this route I'll check with the designer again and see if I can convince him to repeat it! :DDef
So you can tighten the pivot if you should want to? Or remove the clip? :D
-
The clip would be permanent if done that way, and that might be part of it, but since the clip would simply be an extra strip of metal, it could be placed pretty well anywhere.
Def
-
you know, depending on how it is balanced, that Ta-Bar looks like it would make a good bo-shuriken.

-
Love the look of the NIRK
Never had a CRKT before but that may now change .Dunc
-
Same here. Really interesting design.
-
I would actually get one, and really plan on making that the top of the list. It is unusual and different and really pushes the envelope on design. Gerber you watching?
-

Overall from what I have seen in person from the Flux is that it's a rather well thought out piece. If the Flux was never released beyond the basic set (knife module and driver module) the idea would fizzle rather quickly, the main thing the Flux has going for it is that it is a platform for all kinds of expansion. It's kind of like a radical twist on the Coleman Pro-Lock. The Flux and it's success relies solely on the sum of it's parts, if they can keep up with demand and even release some new modules now and then it might stand a good chance. I think CRKT/ ID Works creates some fantastic designs and this is something so radical it could work. I am not too fond of the smallish nature of the main blade or maybe the fact that everything is bead blasted (god I love shiny metal) but it's got lots of potential and I cannot wait to try one out. When I EDC multitools I rarely have need for pliers, I am more knife and driver based than most folks and it just works for me. Just the Flux "basic" set is enough to fill that need and would give me other ways to expand if I chose to do so. Hey CRKT, you can drop one off anytime....

-
Overall from what I have seen in person from the Flux is that it's a rather well thought out piece. If the Flux was never released beyond the basic set (knife module and driver module) the idea would fizzle rather quickly, the main thing the Flux has going for it is that it is a platform for all kinds of expansion. It's kind of like a radical twist on the Coleman Pro-Lock. The Flux and it's success relies solely on the sum of it's parts, if they can keep up with demand and even release some new modules now and then it might stand a good chance. I think CRKT/ ID Works creates some fantastic designs and this is something so radical it could work. I am not too fond of the smallish nature of the main blade or maybe the fact that everything is bead blasted (god I love shiny metal) but it's got lots of potential and I cannot wait to try one out. When I EDC multitools I rarely have need for pliers, I am more knife and driver based than most folks and it just works for me. Just the Flux "basic" set is enough to fill that need and would give me other ways to expand if I chose to do so. Hey CRKT, you can drop one off anytime....

Did they have a version where the middle piece was a pair of pliers?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login