Show Us Your EDC gear!!!
-
I thought I wouldn't use my pico at all but to the contrary I find I use it all the time
:Dthings I've used mine for:
opening boxes
prying batteries from carriers
spreading split rings
get stones out of the tread on my boots
nail cleaner
grout scrapper
used it unscrewing a light switch cover
I also find it works great as a striker on fire steels
and anything I usually use my thumb nail to scrap
-
I'm going to try this book binding ring in side my Maxped EDC org "that is once it arrives ::)"
Anyway I've been using one for a few days and I like them,ok they're not to be used say hanging from you belt just in case it opens inadvertently and well you could lose stuff :ahhh
But used in a EDC organiser or deep in a pocket it'll be fine,I've found them to be very useful for getting to something on the ring very quickly

They snap shut and cannot be pulled apart easily,the ones I'm trying are 19mm dia which adds to a small profile

Not sure if you'll agree with me but it's another carry option when you need to keep little key thing's together but may need to get to a particular one in a hurry ;)

-
@cerbera147 said:
Thank you Sazabi for your detailed answer

The Pico Bars do look great for keys but as you say probably not practical for heavy usage ::)
Might look towards the Micro Widgy although now you have drawn my attention the Pocket Wrench II ::)
:DNice

You're welcome, Cerbera; I'm just curious why they no longer make (or had a very limited run, at least) of the Carbon V Pocket Wrench IIs. :/
-
@Sazabi said:
You're welcome, Cerbera; I'm just curious why they no longer make (or had a very limited run, at least) of the Carbon V Pocket Wrench IIs. :/Well, Carbon V is no longer available anyhow, and frankly I don't think there would be a purpose in using such a steel for the intended use of this product.

-
@Freudian Frog said:
You're welcome, Cerbera; I'm just curious why they no longer make (or had a very limited run, at least) of the Carbon V Pocket Wrench IIs. :/
Well, Carbon V is no longer available anyhow, and frankly I don't think there would be a purpose in using such a steel for the intended use of this product.

But it looked pretty. :P >.> I don't see why some other company doesn't purchase the, I dunno, rights to create a steel when a particular factory goes under. :/ Granted, I don't know much beyond the general types of steel for which I should keep any eye out on, compared to ones (AUS-4, anyone?) I should avoid for a knife. I'm still a probie in that department. :P
-
@Sazabi said:
But it looked pretty. :P >.> I don't see why some other company doesn't purchase the, I dunno, rights to create a steel when a particular factory goes under. :/ Granted, I don't know much beyond the general types of steel for which I should keep any eye out on, compared to ones (AUS-4, anyone?) I should avoid for a knife. I'm still a probie in that department. :PI'm not sure if it's about the rights, rather than just the setup costs to bring that particular alloy back on the market.

-
@Freudian Frog said:
But it looked pretty. :P >.> I don't see why some other company doesn't purchase the, I dunno, rights to create a steel when a particular factory goes under. :/ Granted, I don't know much beyond the general types of steel for which I should keep any eye out on, compared to ones (AUS-4, anyone?) I should avoid for a knife. I'm still a probie in that department. :P
I'm not sure if it's about the rights, rather than just the setup costs to bring that particular alloy back on the market.

I can see that argument, yeah. Hrm, any word on how Crucible is doing? It's just a shame stable steelworks can't purchase failed steelworks (such as Blackjack), not only expanding their purvey, but also keeping a good steel on the market without the need of any costly setup investment, especially if the equipment is still in place. :/
-
@Freudian Frog said:
But it looked pretty. :P >.> I don't see why some other company doesn't purchase the, I dunno, rights to create a steel when a particular factory goes under. :/ Granted, I don't know much beyond the general types of steel for which I should keep any eye out on, compared to ones (AUS-4, anyone?) I should avoid for a knife. I'm still a probie in that department. :P
I'm not sure if it's about the rights, rather than just the setup costs to bring that particular alloy back on the market.

I can see that argument, yeah. Hrm, any word on how Crucible is doing? It's just a shame stable steelworks can't purchase failed steelworks (such as Blackjack), not only expanding their purvey, but also keeping a good steel on the market without the need of any costly setup investment, especially if the equipment is still in place. :/
Problem is, who'd invest in a steelworks that failed? The underlying reason is not likely to change... and there's nothing in the steelworks itself that you can do either. :-[
-
@Freudian Frog said:
@Freudian Frog said:
But it looked pretty. :P >.> I don't see why some other company doesn't purchase the, I dunno, rights to create a steel when a particular factory goes under. :/ Granted, I don't know much beyond the general types of steel for which I should keep any eye out on, compared to ones (AUS-4, anyone?) I should avoid for a knife. I'm still a probie in that department. :P
I'm not sure if it's about the rights, rather than just the setup costs to bring that particular alloy back on the market.

I can see that argument, yeah. Hrm, any word on how Crucible is doing? It's just a shame stable steelworks can't purchase failed steelworks (such as Blackjack), not only expanding their purvey, but also keeping a good steel on the market without the need of any costly setup investment, especially if the equipment is still in place. :/
Problem is, who'd invest in a steelworks that failed? The underlying reason is not likely to change... and there's nothing in the steelworks itself that you can do either. :-[
True, Frog, still, I suppose it's just a pipe dream, is all. ^^; Even though I don't have any knives using Crucible Steel in it, it'd still be a shame to not only lose those jobs, but all of their special steels, as well, if they happen to go the same way as Blackjack. :/
-
Nice simple dump today: :D

Not shown: Saddleback Leather wallet, SAK.
-
That's a nice looking dump. :D
How do you like the Burt's Bees? My wife recently bought be Burt's Hand Salve for my extremely dry and cracked hands and it seems to work wonders.
-

Just the pants pockets.
-
why the rock?
because he's worried.
-
How's the new blade then John? :)
-
Hey John. How do you like the Backup? Do you find it comfortable in the pocket?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login