2010 Shot - Multitasker
-
I blame Tom Cruise in Topgun :D
-
@DaveK said:
Well, Bob's topic has gone down the pan already, so I may as well reply.....I blame Tom Cruise in Topgun :D
Admit it - he had a pretty cool job in that film, no?
If it had of had just one multitool scene in it then it would have been the coolest film of all time :D
Can't believe I just said that :-[
Dunc
-
Well, Bob's topic has gone down the pan already, so I may as well reply.....
I blame Tom Cruise in Topgun :D
Admit it - he had a pretty cool job in that film, no?
If it had of had just one multitool scene in it then it would have been the coolest film of all time :D
Can't believe I just said that :-[
Dunc
neither do i :o
-
Hey bob, PM me when you want this added to the main page....oh heck, you can do it right?
-
The Leatherman MUT is a nice tool but seems more gimmicky to me that the Multitasker. This tool has nice lineup of tools to actually help maintain an AR. The dental pick, the stock wrench, etc. It's not just a fancy handle for a cleaning rod. And the quality and price is exceptional. Great story J-sews and welcome to the forum Multitasker and congrats on a nice tool.

-
I like the look of it too for the price. Congrats on seemingly finding a niche market and doing a nice job of it

I really like the little bit holder - as a side thought, it might be worth selling things like those accessories separately as they have a wider appeal than just for owners of specific weapons etc.
-
Looks a very nice tool, I love the fact you have the G10 scales

Probably wouldn't use most of the tools on this thing but I might still be tempted to buy one at sometime :) -
I actually own a Bushmaster and I love this tool. However I dont think that this is for me. I have these tools, and really use a multi for a multi purpose. However this does not mean you have to go against the big guys, but just maybe offer several tools that can be exchanged out for more useful parts like saws and openers.
I however congradulate you on making one of the most handsome tools out there.
-
Very nice Shane!
Great job again Bob 
Thank you for taking the time to talk to us and Bob and Grant.
I respect when makers and companies remember us tool nuts!
Good Luck in the future
-
I dunno, most folks who takes the time to talk with Grant and I usually start nodding off after a few minutes. :P At least Shane had the decency to stay awake the whole time! :D
Hey Shane, a question: are you folks still planning to offer the Series 2 model in a regular version and a high grade version? ???
If so can you shed some details on what the differences between the two will be? :)
-
@David Bowen said:
Hey bob, PM me when you want this added to the main page....oh heck, you can do it right?Probably best to wait until we have an actual review of the tool, rather than some initial impressions based on a short play at a show! :D
@ GotUCovered
You have the choice to buy what you like, and I don't think anyone here wants to change your opinion. This tool however is solid proof of what I have been saying for years- that good products can indeed be made in China, and that the crap we usually associate with China made products is our own bloody fault. In Shane's experience, Chinese manufacturers are so used to Westerners (using "Americans" as a general term, like Kleenex or Xerox) buying crap that they think that's what we want. Given the amount of crapola that we obviously buy, I'd believe that's the way it was if that's what I had to go on.
I have seen and held and played with several of the Multitasker tools, and I can honestly say, they are very well put together, and, as much as it pains me to say it, I haven't seen that level of perfection on any other tool. It's hard to compare though, as the Multitaskers I looked at were (I think) prototypes, or at least small run tools, while all the others are mass produced, and as a result, have a higher measure of QC.
While I know your issues are not with quality, but with country of manufacture, and I respect that, I have to say that you really don't know what you are missing!
Oh, and just so you all know it's really me (since I have the uncanny ability to shoot holes in anything!) I felt that this tool was too specialized, and as was said recently about Leatherman's MUT, why would you need a multitool which is always going to be a compromise, when you are probably going to have an entire cleaning kit available, or if not, you aren't likely to be disassembling the weapon for maintenance/cleaning. According to the officer that helped Leatherman design the MUT, if the weapon jams when the fan is getting covered, the sad truth is that likely one of your buddies is already face down, and his weapon is likely to be available. I see the same going for the Multitasker, and so the real value to me for tools like this, even fairly specific ones, are their ability to be used for general purpose functions.
That's not to take anything away from the Multitasker or the MUT, just pointing out that a multitool is always a compromise, and I'm not certain how often you are going to compromise on maintaining a weapon platform.
Def
-
@Grant Lamontagne said:
Probably best to wait until we have an actual review of the tool, rather than some initial impressions based on a short play at a show! :DOh, and just so you all know it's really me (since I have the uncanny ability to shoot holes in anything!) I felt that this tool was too specialized, and as was said recently about Leatherman's MUT, why would you need a multitool which is always going to be a compromise, when you are probably going to have an entire cleaning kit available, or if not, you aren't likely to be disassembling the weapon for maintenance/cleaning. According to the officer that helped Leatherman design the MUT, if the weapon jams when the fan is getting covered, the sad truth is that likely one of your buddies is already face down, and his weapon is likely to be available. I see the same going for the Multitasker, and so the real value to me for tools like this, even fairly specific ones, are their ability to be used for general purpose functions.
That's not to take anything away from the Multitasker or the MUT, just pointing out that a multitool is always a compromise, and I'm not certain how often you are going to compromise on maintaining a weapon platform.
Def
I dunno. If you are going to have a tool that is trying to hit a specific user group, then you have to go all out or what was the point to the exercise. If you are in the field, you don't want to try to use your pliers to unjam your M-16 if you have a MUT, you can do it with the right tool and not waste time trying to unfold your jaws. If you do, you'll end up getting your bum shot off. (can I say "bum" here? I know brits have funny words for stuff like "tracky bottoms" and "trainers").

Anyway, GO BIG OR STAY HOME with the specialized multi-tools. And if some limey or septics says I wouldn't use the particular assortment of features, then he's probably not in the Target Market.
-
@Grant Lamontagne said:
Probably best to wait until we have an actual review of the tool, rather than some initial impressions based on a short play at a show! :DI have seen and held and played with several of the Multitasker tools, and I can honestly say, they are very well put together, and, as much as it pains me to say it, I haven't seen that level of perfection on any other tool. **It's hard to compare though, as the Multitaskers I looked at were (I think) prototypes, or at least small run tools, while all the others are mass produced, and as a result, have a higher measure of QC. **
Point well taken Grant.
<u>But honestly, if we tried to prep a small batch of "massaged" press samples, then substituted a lower spec unit for "mass" production, I think people would catch on rather quickly...I just don't see the point in doing something that shortsighted.</u>
The proof will be when PRODUCTION units are delivered to retailers such as Brownells and ARFCOM (AR15.com); manufacturing is already underway, using the SAME processes (and materials) we used to make the samples displayed at SHOT. It is this production process that allows us to customize our tool platforms to accomodate specific customer requirement(s).
It is a real point of emphasis for our programme.
-
@J-sews said:
Hey Shane, a question: are you folks still planning to offer the Series 2 model in a regular version and a high grade version? ???If so can you shed some details on what the differences between the two will be? :)
The "std" version will have the billet pliers (GS2510 tool steel) with a 440C knife blade
The "mack daddy" version will come later, expect it to have billet pliers from same material but probably with cryogenic treatment of the steel, and the knife blade will be Daido DC53 tool steel (superior to D2); the supplied tool bits will be specially coated too. Not sure what the final form factor will be yet - I have a concept that is totally different from the Series2, am leaning towards putting it into limited production, just to test the market.
-
G'day too you Shane , I really like what you have done with the Multitasker , your use of high grade materials have brought a new dimension too the Multitool market
. It is a real shame that a generalised non firearm version is not in your strategic plan :( :( :( :( :( :D, as you have done ALL the hard work getting the MT too this stage.Adding a saw , scissors, awl or a diamond file would be a piece of piss(easy :D :D :D).
Shane is the Multitasker solely intended for the North American market
, if you could sub in a couple of easily obtainable tools in-lieu of the specific firearm tools, you would have a product with world wide appeal
:D :D + you would scare the bejeebers out of the 'Big Guys' , HOW COOL WOULD THAT BE :D

Thanks for talking too us mate
:D -
@Grant Lamontagne said:
Probably best to wait until we have an actual review of the tool, rather than some initial impressions based on a short play at a show! :D
I have seen and held and played with several of the Multitasker tools, and I can honestly say, they are very well put together, and, as much as it pains me to say it, I haven't seen that level of perfection on any other tool. **It's hard to compare though, as the Multitaskers I looked at were (I think) prototypes, or at least small run tools, while all the others are mass produced, and as a result, have a higher measure of QC. **
Point well taken Grant.
<u>But honestly, if we tried to prep a small batch of "massaged" press samples, then substituted a lower spec unit for "mass" production, I think people would catch on rather quickly...I just don't see the point in doing something that shortsighted.</u>
The proof will be when PRODUCTION units are delivered to retailers such as Brownells and ARFCOM (AR15.com); manufacturing is already underway, using the SAME processes (and materials) we used to make the samples displayed at SHOT. It is this production process that allows us to customize our tool platforms to accomodate specific customer requirement(s).
It is a real point of emphasis for our programme.
I think the point is, that when something is being mass produced, people get complacent and total quality can get a little lax.
-
Just a thought I had last night Bob, you know the whole powercut mod you did for the sog powerlock. Could the same thing be accomplished if you added some tool steel forged pliers instead? You discussed how everyone uses molds in the industry and this plier head stands out from the rest. I know that cost is a major factor in manufacturing, but could a mod be done like your other one?
-
I'm sad to see there won't be a more generic version but I can understand the reasoning. It does look to be an exceptional tool.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login