2010 Shot - Multitasker
-
G'day too you Shane , I really like what you have done with the Multitasker , your use of high grade materials have brought a new dimension too the Multitool market
. It is a real shame that a generalised non firearm version is not in your strategic plan :( :( :( :( :( :D, as you have done ALL the hard work getting the MT too this stage.Adding a saw , scissors, awl or a diamond file would be a piece of piss(easy :D :D :D).
Shane is the Multitasker solely intended for the North American market
, if you could sub in a couple of easily obtainable tools in-lieu of the specific firearm tools, you would have a product with world wide appeal
:D :D + you would scare the bejeebers out of the 'Big Guys' , HOW COOL WOULD THAT BE :D

Thanks for talking too us mate
:D -
@Grant Lamontagne said:
Probably best to wait until we have an actual review of the tool, rather than some initial impressions based on a short play at a show! :D
I have seen and held and played with several of the Multitasker tools, and I can honestly say, they are very well put together, and, as much as it pains me to say it, I haven't seen that level of perfection on any other tool. **It's hard to compare though, as the Multitaskers I looked at were (I think) prototypes, or at least small run tools, while all the others are mass produced, and as a result, have a higher measure of QC. **
Point well taken Grant.
<u>But honestly, if we tried to prep a small batch of "massaged" press samples, then substituted a lower spec unit for "mass" production, I think people would catch on rather quickly...I just don't see the point in doing something that shortsighted.</u>
The proof will be when PRODUCTION units are delivered to retailers such as Brownells and ARFCOM (AR15.com); manufacturing is already underway, using the SAME processes (and materials) we used to make the samples displayed at SHOT. It is this production process that allows us to customize our tool platforms to accomodate specific customer requirement(s).
It is a real point of emphasis for our programme.
I think the point is, that when something is being mass produced, people get complacent and total quality can get a little lax.
-
Just a thought I had last night Bob, you know the whole powercut mod you did for the sog powerlock. Could the same thing be accomplished if you added some tool steel forged pliers instead? You discussed how everyone uses molds in the industry and this plier head stands out from the rest. I know that cost is a major factor in manufacturing, but could a mod be done like your other one?
-
I'm sad to see there won't be a more generic version but I can understand the reasoning. It does look to be an exceptional tool.
-
@MultiMat said:
G'day too you Shane , I really like what you have done with the Multitasker , your use of high grade materials have brought a new dimension too the Multitool market
. It is a real shame that a generalised non firearm version is not in your strategic plan :( :( :( :( :( :D, as you have done ALL the hard work getting the MT too this stage.Adding a saw , scissors, awl or a diamond file would be a piece of piss(easy :D :D :D).
Shane is the Multitasker solely intended for the North American market
, if you could sub in a couple of easily obtainable tools in-lieu of the specific firearm tools, you would have a product with world wide appeal
:D :D + you would scare the bejeebers out of the 'Big Guys' , HOW COOL WOULD THAT BE :D

Thanks for talking too us mate
:DYou make some good points, so I will consider this when mapping out future products.
What I may do is make a ltd. run of a high-end multitool with more general purpose applications. Can't promise WHEN, but it should be doable.
-
-
These are built like tanks
I would just own one purely for the sheer quality alone 
[edit] Actually that's not quite true I could use the pliers,file,driver and knife :D
-
G'day too you Shane , I really like what you have done with the Multitasker , your use of high grade materials have brought a new dimension too the Multitool market
. It is a real shame that a generalised non firearm version is not in your strategic plan :( :( :( :( :( :D, as you have done ALL the hard work getting the MT too this stage.Adding a saw , scissors, awl or a diamond file would be a piece of piss(easy :D :D :D).
Shane is the Multitasker solely intended for the North American market
, if you could sub in a couple of easily obtainable tools in-lieu of the specific firearm tools, you would have a product with world wide appeal
:D :D + you would scare the bejeebers out of the 'Big Guys' , HOW COOL WOULD THAT BE :D

Thanks for talking too us mate
:DYou make some good points, so I will consider this when mapping out future products.
What I may do is make a ltd. run of a high-end multitool with more general purpose applications. Can't promise WHEN, but it should be doable.
Shane
.
Saving , saving, saving
:D -

UK Group buy of AR15/M16 rifles on the horizon >:D
-
UK Group buy of AR15/M16 rifles on the horizon >:D

-
G'day too you Shane , I really like what you have done with the Multitasker , your use of high grade materials have brought a new dimension too the Multitool market
. It is a real shame that a generalised non firearm version is not in your strategic plan :( :( :( :( :( :D, as you have done ALL the hard work getting the MT too this stage.Adding a saw , scissors, awl or a diamond file would be a piece of piss(easy :D :D :D).
Shane is the Multitasker solely intended for the North American market
, if you could sub in a couple of easily obtainable tools in-lieu of the specific firearm tools, you would have a product with world wide appeal
:D :D + you would scare the bejeebers out of the 'Big Guys' , HOW COOL WOULD THAT BE :D

Thanks for talking too us mate
:DYou make some good points, so I will consider this when mapping out future products.
What I may do is make a ltd. run of a high-end multitool with more general purpose applications. Can't promise WHEN, but it should be doable.
Well you may put me down for one of those Shane. Can I have number #1 please? ;)
-
UK Group buy of AR15/M16 rifles on the horizon >:D
Yeah all shipped to sparky's house

I'd be in for both but I think the import duties would be rather extreme
:_c: :D -
I've got to go lads there's something happening out the front, blue flashing lights an stuff

-
For those interested, here is a detailed review of the original AR Multitasker, including photos showing how to use the various implements; so at least you know it's not vaporware :P

We were able to gather useful feedback from the release of the original and incorporate those ideas into the Series2. Nobody actually complained about the cast pliers in the original, but we had an opportunity to switch to billet so we took it.
-
Multitaskertools,
Great tool. Anyone that served in the US Military or owns an AR variant or both, knows that your tool is exceptionally thought out for it's purpose. Your tool would be an excellent compliment to the standard military cleaning kit, i.e. cleaning rods, bore brush, brass tooth brush and Break Free. Well done.

-
@sparky415 said:
I've got to go lads there's something happening out the front, blue flashing lights an stuff

See you in a few years mate. :_c:

-
@1jump2many said:
Multitaskertools,Great tool. Anyone that served in the US Military or owns an AR variant or both, knows that your tool is exceptionally thought out for it's purpose. Your tool would be an excellent compliment to the standard military cleaning kit, i.e. cleaning rods, bore brush, brass tooth brush and Break Free. Well done.

That's just a distraction, they'll be dropping in from the black helicopters round the back :ahhh
-
Multitaskertools,
Great tool. Anyone that served in the US Military or owns an AR variant or both, knows that your tool is exceptionally thought out for it's purpose. Your tool would be an excellent compliment to the standard military cleaning kit, i.e. cleaning rods, bore brush, brass tooth brush and Break Free. Well done.

That's just a distraction, they'll be dropping in from the black helicopters round the back :ahhh
Black helos went out with the 90's, it seems it's Predator UAV's now. One second you're there the next............ :D
-
@Grant Lamontagne said:
Oh, and just so you all know it's really me (since I have the uncanny ability to shoot holes in anything!) I felt that this tool was too specialized, and as was said recently about Leatherman's MUT, why would you need a multitool which is always going to be a compromise, when you are probably going to have an entire cleaning kit available, or if not, you aren't likely to be disassembling the weapon for maintenance/cleaning.That's not to take anything away from the Multitasker or the MUT, just pointing out that a multitool is always a compromise, and I'm not certain how often you are going to compromise on maintaining a weapon platform.
Def
Grant, our idea of the weapon-specific multitool is that it isn't intended to replace the cleaning kit - it is actually designed to work in conjunction WITH the OTIS cleaning kit supplied to the US military.
What we did intend to replace was this:


-
@Grant Lamontagne said:
Oh, and just so you all know it's really me (since I have the uncanny ability to shoot holes in anything!) I felt that this tool was too specialized, and as was said recently about Leatherman's MUT, why would you need a multitool which is always going to be a compromise, when you are probably going to have an entire cleaning kit available, or if not, you aren't likely to be disassembling the weapon for maintenance/cleaning.
That's not to take anything away from the Multitasker or the MUT, just pointing out that a multitool is always a compromise, and I'm not certain how often you are going to compromise on maintaining a weapon platform.
Def
Grant, our idea of the weapon-specific multitool is that it isn't intended to replace the cleaning kit - it is actually designed to work in conjunction WITH the OTIS cleaning kit supplied to the US military.
What we did intend to replace was this:


but, the is no wire brush on it?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login