ST 300 owners club
-
I was thinking of the *stranded * wite cutter beneath the plier head (and just above the crimper).
-
Oooooh sorry - I'm with you now

-
The 300 has tons of cutting capability so they are easy to mix up names and locations :D
-
man this really sucks, I was checking my tools and I have traded all my st300s off! any one have any spares?

-
Waited a week to post in this thread.
Last Saturday I took the plunge and got a ST300 from GG in a trade.
After carrying and using it for a week I can safely say I LOVE THIS THING
/topic/16876
-
I wish LM would release a black oxide version with the standard plier head instead of the crimper head...I'm putting wear and tear on my stainless version that I want to put on a *black * version :D
Those designs with the crimper in the jaws never appealed to me; I think it's a weak spot in the worst place it could be put. And I'f I'm using my MT to wire something up, it will most likely be a quick fix until I can get to somewhere safe to do the job over and do it cleaner, so I probably won't be crimping anything.
-
Got my ST 300 today.
First impressions are that I'm very impressed. Looks like a great worker.
I just love Leatherman's philips drivers. The ST300's phillips has quite the reach.
I like the notches in the side that allow you to easily open the two knives. This will work great in the winter when I'm wearing gloves.
Pics to come.
:D -
Here's some pics:


Loving this tool so far. May need to order a B.O. version too.
-
i really want one :(
going to wait for my birthday i think though, when i bought my charge i tried to choose between this and the alx i figure i can get both now though =D
-
BO SUPERTOOL 300 - got it!
I generally like it, however there are some quality issues:
- Locking mechanism was slightly imperfect (the plate that is pushed in to release the opened tool had huge amount of play, I managed to fix it by levering up the tiny uhm edging(?) that supposed to put pressure on the "releasing plate")
2)BO ST 300 makes my hands dirty
- It is so toooo tight
-
I'm so on the fence with this tool. I don't know weather I need another tool that I have to crank open
the handles to access implements. Leatherman has spoiled me with the Charge series units. :) -
I understand what you are saying about the Charge. It sure is nice have those 4 implements on the outside. But really, it only takes a couple seconds to get at the tools in the inside.
Not much really.
-
Got my "like new but previously enjoyed" ST 300 today! Seems really nice, surprisingly the fit and finish on mine is way better than my Surge, the tools don't feel gritty coming out and the handles unfold smoothly with no gritty feeling at all. Hey, I noticed the plier heads have that little angled raised portion that deactivates the blade safeties on the Surge if you know what I mean. It cams over the little pokey things that keep the blades locked in the closed position when you are using the pliers if that makes any sense. The gist of what I'm saying is that I think these plier heads would work in a Surge, and maybe that is what Leatherman is planning if they made them with that cam surface built into them, as it serves no purpose on the ST 300 that I can see. What do you guys think?

-
@Marlinaholic said:
Got my "like new but previously enjoyed" ST 300 today! Seems really nice, surprisingly the fit and finish on mine is way better than my Surge, the tools don't feel gritty coming out and the handles unfold smoothly with no gritty feeling at all. Hey, I noticed the plier heads have that little angled raised portion that deactivates the blade safeties on the Surge if you know what I mean. It cams over the little pokey things that keep the blades locked in the closed position when you are using the pliers if that makes any sense. The gist of what I'm saying is that I think these plier heads would work in a Surge, and maybe that is what Leatherman is planning if they made them with that cam surface built into them, as it serves no purpose on the ST 300 that I can see. What do you guys think?
I am sure that they will eventually make there way to most of the tools
but as is the plier head of the ST300 won't allow the Surge to close completely as another of our members here I believe DaveK tried it for fun and the tool won't close all the way but it will only take a little modifying and we will see it on other tools in the current lineup 
-
I'm pretty sure the same plier head is used on the new MUT, where the little ramps actuate the blade safeties. :)
-
@J-sews said:
I'm pretty sure the same plier head is used on the new MUT, where the little ramps actuate the blade safeties. :)Who knows the MUT may have been on the drawing table longer than the ST300 and the plier head was originally designed for it and somebody said hey let's put that on the ST300 as well :D
-
I'm pretty sure the same plier head is used on the new MUT, where the little ramps actuate the blade safeties. :)
Who knows the MUT may have been on the drawing table longer than the ST300 and the plier head was originally designed for it and somebody said hey let's put that on the ST300 as well :D
:o :o
-
I finally got my hands on one of these. Holy cow, what a beast. I've certainly found my new EDC. I'm loving the simplicity and strength of this thing. The perfect no frills tool.
-
You said it. It's a remarkable tool but I prefer something a bit smaller for EDC.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login