New Reviews
-
Good work, Def.

The handle on my H502 doesn't hold the screwdriver bits securely so I keep them in the in bit holder in the belt holster.
My wife scored a few Buck Metros on sale for $3/each a couple of years ago and bought them to give away as gifts. You're correct about the blade being so small. The blade lock on some of the Metros failed to engage reliably when opening the blade unless you were careful to open the blade fully.
-
Great work boss.
You've got me wanting to spend money anyway. ::) :D -
-
Here's a couple more reviews I wrote in the last week. Again, I need to get some actual photos done before putting them on the main site, but I thought you guys might want to look at them anyway.
Blackhawk HawkHook

Having never handled any Blackhawk tools or knives I wasn't sure what to expect when I ordered the HawkHook. At an MSRP of about $40, I figured it was worth a shot, and I'm glad I decided to. As of this writing I have yet to save anyone with it from a mangled car wreck, but I will say that this is indeed a decently made tool. In fact, it reminds me a lot of the Boker RESCOM designed by Chad Los Banos, not only because of the similar size and function, but also because it has a very similar design. While the RESCOM is based off a knife platform, the HawkHook is, at least as far as I've been able to tell, a standalone design, and incorporates a few added features over the RESCOM. The HawkHook is basically a frame lock type folding knife, with what initially appears to be a g-10 handles scale on one side (further inspection reveals it to be a molded plastic) and a bead blasted steel frame on the other, with the integrated liner type lock and a skeletonized pocket clip. It's fairly small, but it locks up securely when opened with the ambidextrous thumb stud. Opening action is smooth and the blade makes a solid snap when locked into place- after hundreds of “flicks” I have yet to have a single instance where the blade didn't open entirely, and the lock didn't engage. Lefties may have a problem with the HawkHook, as the pocket clip can get in the way of the ambidextrous thumb stud, and there are no places to relocate the pocket clip to, although it can be removed altogether. I'd still like to see a couple of holes drilled and tapped on the opposite end of the handles to allow for different carry methods, and to move the pocket clip out of the way for left handed users. The blade on the HawkHook is AUS-8A which was a premium steel a few years ago, and while there are supposedly better steels out there, I have never had an issue with AUS-8A. It works well enough for any application I have used it for, and I see no reason to expect any problems with it here. Incorporated into the blade section is a hooked strap cutting edge, a serrated edge, flathead screwdriver, glass breaker, bottle opener, and what appears to be some kind of wire stripper notch. While I expect almost no functionality to the wire stripper, the other features seem well thought out. I often wonder why all rescue type tools seem to incorporate a bottle opener. Is it a tip of the hat to rescue workers- a way for the manufacturers to “buy” them a drink as a thanks for the work they do? Or is it an insinuation that the stress of rescue work drives first responders to drink? Or, is it simple an easy tool to incorporate in pretty well any tool, and is a cheap way to add features without increasing cost? Whatever the reason, this bottle opener functions well enough, and that's really what's important. At the very tip of the HawkHook is a flathead screwdriver, which seems solid enough for light prying duties. I would consider it useful for only very light duties, as the pivot pin is not large enough to withstand any serious pressure, even though it appears that the blade could stand a more reasonable amount. If Blackhawk wants this to compete with other Rescue Tools on the market, I'd consider a pivot pin about twice the thickness of the current one. In a Rescue/Survival situation where one is relying on this tool, I doubt the user will be worried too much about the limitations and may end up breaking it at a very inopportune time. As a screwdriver, it seems a little wide. It is good for larger flathead screws, and has withstood the reasonable amount of torque I have subjected it to without any twisting or slippage. Glass breakers generally come in one of two types- the spring loaded glass breaker like the Benchmade Houdini or INOV8's ResQMe tool or an in-line point like the Victorinox Rescue Tool or the Utica/Kutmaster Rescue Knives. This is one of the places where the HawkHook stands out, as it actually incorporates a hammer style glass breaker. With many striker type glass breakers the user runs the risk of dangerous cuts to the hand and forarm as there's a significant chance they will come in contact with shards of glass, especially if too much force is used. The nice thing about a hammer style is that it takes the user's hands out of the direct line of force that is being used to shatter the glass. Usually however the hammer style has some weight in the head so that the force is transferred to the glass on the point of impact, but the HawkHook has very little weight to transfer and as a result may not be as effective. I will have to perform further tests to determine how functional this ability actually is. As with the RESCOM, the HawkHook uses a serrated blade leading into the belt cutting hook as a combination type cutter. Each has the ability to perform on it's own, but when used together they make a very effective belt cutting team. The serrated edge bites into the belt and leads the edges into the hook which finishes it off. This is a very effective system that I would like to see on more tools in the future. The Bottom Line for the HawkHook is this- if you are a paremedic/EMT/firefighter/police officer or other first responder type of professional, you likely have other, better tools available to you. If that's the case, then you don't need the HawkHook, although I usually prefer to have my own tools handy in addition to issue equipment. You never suffer from having too many options. The real value to a tool like the HawkHook is to the individual, especially if you spend any significant amount of time driving or around any kind of heavy equipment, as having a tool handy- any tool really, but especially one designed as a rescue tool- can literally make the difference between life and death. As an EDC type tool however, the HawkHook isn't recommended as it's actual use in day to day tasks is quite limited. It isn't designed for that though, so that should come as no surprise. My suggestion for the HawkHook is to get it and clip it to the sun visor of your car and forget about it until you need it.Pros:
Well made
Compact
Good array of functions for a compact toolCons:
Awkward for left hand use
Expensive compared to peers
Needs bigger pivot pinScrewPop 4 In 1 Tool

Some ideas are so simple and straightforward you just have to smack yourself in the forehead for not thinking of it yourself. The ScrewPop tool is one of those ideas- basically a bottle opener with a built in screwdriver- a must for any technical student! The main body of the ScrewPop tool is the bottle opener- the ring is large enough to hang from your keys and not be bulky, or, perhaps more importantly, not let your keys get in the way during delicate bottle opening operations. The large mouth accepts both twist off caps and non-twist offs with ease, and the shaft provides just enough leverage to get even older tops off quickly and easily. In the shaft is where the ScrewPop differs from most dollar store or promotional type bottle openers- inside is a double ended screwdriver bit, held in by a small ball and detent system. The bit itself has a phillips and flathead end, which should handle most of the screws you are likely to encounter. Since it's a standard 1/4” bit though, it can be substituted for any other standard bits you may prefer to carry, or can function nicely with almost any bit kit.
The bit adaptor also functions as a handy 1/4” wrench, which can come in handy for computer case screws as well as holding screwdriver bits. The bottle opener head provides a decent amount of grip for turning stubborn screws, and the design lends itself to the possibility of adding more torque by putting some kind of bar through the open head for leverage. While the screwdriver/bottle opener combo is simplistic, it is not unique- I find myself comparing it to Columbia River's Get-A-Way Driver, which also fits into this category. The Get-A-Way Driver features four single ended screwdriver bits, bottle opener and a small LED, along with a carabiner, allowing it to be quickly separated from your keys for use. However, the bits are small compared to the ScrewPop tool, and as a result the ScrewPop has more reach for recessed screws.
The Bottom Line is the ScrewPop is a handy little tool that is inexpensive enough to get one for everyone you know, and small enough that no one will realize they are carrying it until they need it, at which point they will silently thank you for providing it. It's a simple design with simple construction, and has held up quite well to the extensive testing I have done with it- admittedly a good percentage of that has been on the bottle opener, but since it's the primary tool I didn't want to overlook it!Pros:
Lightweight
Inexpensive
Functional/AdaptableCons:
Keys could get in the way of screwdriver function
Not as functional as other tools in this category
Bottle opener head is a bit bulkyEnjoy! :D
Def
-
@Grant Lamontagne said:
Lefties may have a problem with the HawkHook, as the pocket clip can get in the way of the ambidextrous pocket clip, and there are no places to relocate the pocket clip to, although it can be removed altogether.If it has a fixed location, but can be removed how does it make it mabidextrous
:D Guess it's a typo. Great review Def, I've been eying the HawkHook for a while now, wish they made an orange one 
-
Just wondering Def, you say in the Screwpop review in the end at the pro/con section "Not as functional as other tools in this category" Which are more functional in you opinion in this category? I guess there is not much in this category, other one piece tools are usually much more expensive.
Btw, great review as always

-
Donvito- It's not fixed, it's screwed in, but there are no other screw holes to relocate it to, so if you remove it, it's just removed, unless you drill/tap your own holes.
Zepla- With a tool that simplistic I was reaching for cons- my pattern is to always provide three pros and three cons so it stays balanced and objective. With some tools I'm really reaching to find three good things or three bad things, and in this case that was the best I managed. I put it in the same class as the CRKT Get-A-Way Driver since they are both keychain type bottle opener/screwdriver tools. Compared to the Get-A-Way Driver (God I hate that name!) the ScrewPop comes up short as the CRKT has twice as many screwdriver options, a carabiner, an LED light and can be used in the 90 degree position as well as straight. Of course the Get-A-Way Driver retails for $20 while the ScrewPop retails for $5, but when you consider that most of us buy these things online and shipping costs need to be added, there really isn't much difference- especially when you look at a $5 tool that will sell for $5, and a $20 tool you are likely to get for $12. Basically both tools can be had for pocket change, and so I feel the little bit extra money is justified by the extra function of the Get-A-Way Driver.
But, by all means, keep the questions coming!
Def
-
Yup- that's what I meant! Fixed now! :D
Def
-
No problem- that's why I posted it here in the first place! :D
Def
-
@Grant Lamontagne said:
Donvito- It's not fixed, it's screwed in, but there are no other screw holes to relocate it to, so if you remove it, it's just removed, unless you drill/tap your own holes.Zepla- With a tool that simplistic I was reaching for cons- my pattern is to always provide three pros and three cons so it stays balanced and objective. With some tools I'm really reaching to find three good things or three bad things, and in this case that was the best I managed. I put it in the same class as the CRKT Get-A-Way Driver since they are both keychain type bottle opener/screwdriver tools. Compared to the Get-A-Way Driver (God I hate that name!) the ScrewPop comes up short as the CRKT has twice as many screwdriver options, a carabiner, an LED light and can be used in the 90 degree position as well as straight. Of course the Get-A-Way Driver retails for $20 while the ScrewPop retails for $5, but when you consider that most of us buy these things online and shipping costs need to be added, there really isn't much difference- especially when you look at a $5 tool that will sell for $5, and a $20 tool you are likely to get for $12. Basically both tools can be had for pocket change, and so I feel the little bit extra money is justified by the extra function of the Get-A-Way Driver.
But, by all means, keep the questions coming!
Def
Thanks for the reply. Makes totally sence

-
I'm partial to the CRK&T tool eatin tool

-
@BIG-TARGET said:
I'm partial to the CRK&T tool eatin tool
I like the look of it but I'm quite sure I would end up piercing my tongue or something :-\
Thanks for all the hard work Grant

-
@Grant Lamontagne said:
The top dog in this particular line was the now discontinued h502.Being the largest in the series, the h502 is a pretty bulky knife- so bulky in fact that it's the only one in the entire series that doesn't include a pocket clip,
just a silly question, the h502 is the same size as the h503 and k502/503 correct?
-
@Grant Lamontagne said:
The top dog in this particular line was the now discontinued h502.
Being the largest in the series, the h502 is a pretty bulky knife- so bulky in fact that it's the only one in the entire series that doesn't include a pocket clip,just a silly question, the h502 is the same size as the h503 and k502/503 correct?
That's right - the K502/3 has the better 154CM blade steel, and some aluminium where the H502/3 has rubber....
Have a look here if you haven't already :)
-

talk about deceptive markings - those are OBVIOUSLY Chinese knives from Yangjiang, I know I've seen enough of em :ahhh
-
They say China on the opposite side of the blades.


I don't believe they are trying to suggest falsely that the knives are US made, just trying to point out that Utica Cutlery is still US owned. Besides, at the price of these, you wouldn't get any knife made in the US.
Def
-
DEF- Thank-you for the reviews.
-
No problem- One of these days I'll get the photos done and get them posted on the main site. I also have another couple of tools to review to add to the list.
We'll be hitting the 200 mark soon!
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login