Leatherman PST chronology project
-
OK I have a confession; I don't play with or carry my PST much. :-[ But I was using it this morning and noticed something for the first time, that is that the file has washers on both sides and so is non-clumping. It's a 2002 PST and I was wondering if the earlier models were the same?
well my 01 pst2 doesnt clump on the file, and nor does the later 80's pst, possibly they all do this ?
Cheers Paul, at least it's not just me. :) Is there an obvious gap on either side of the file where the washers are?
not a obvious gap but its there, i really must get them both out later and have a fiddle with the clumping situation , although i like clumping :-\
-
OK I have a confession; I don't play with or carry my PST much. :-[ But I was using it this morning and noticed something for the first time, that is that the file has washers on both sides and so is non-clumping. It's a 2002 PST and I was wondering if the earlier models were the same?
well my 01 pst2 doesnt clump on the file, and nor does the later 80's pst, possibly they all do this ?
Cheers Paul, at least it's not just me. :) Is there an obvious gap on either side of the file where the washers are?
not a obvious gap but its there, i really must get them both out later and have a fiddle with the clumping situation , although i like clumping :-\
AFAIK there's not much to be done, plus I'm not sure you'd want to get rid of it completely. I don't fancy having to get out the medium flat or phillips driver if they didn't clump with the tools next to them. The only one I'd really like to see pop out on it's own would be the knife (as I think they have done on the ST300).
-
[quote author=Gareth link=topic=5877.msg361723#msg361723 date=1271168166]
OK I have a confession; I don't play with or carry my PST much. :-[ But I was using it this morning and noticed something for the first time, that is that the file has washers on both sides and so is non-clumping. It's a 2002 PST and I was wondering if the earlier models were the same?well my 01 pst2 doesnt clump on the file, and nor does the later 80's pst, possibly they all do this ?
Cheers Paul, at least it's not just me. :) Is there an obvious gap on either side of the file where the washers are?
not a obvious gap but its there, i really must get them both out later and have a fiddle with the clumping situation , although i like clumping :-\
AFAIK there's not much to be done, plus I'm not sure you'd want to get rid of it completely. I don't fancy having to get out the medium flat or phillips driver if they didn't clump with the tools next to them. The only one I'd really like to see pop out on it's own would be the knife (as I think they have done on the ST300).
[/quote]it doesnt pop out gareth , but i do like the way it locks back into position

-
Yup - washers either side of the file is normal. I've seen it in the earliest models.
I'm not sure if it was a conscious effort to stop clumping, or more likely something to do with preventing the harder metal wearing down prematurely.
-
my ones from 93 and seems to attempt to stop the tools clumping but slightly fails

-
-
I will be doing a lot more work on this in the coming days, and (time permitting) will do an explanatory article here and on my blog, and maybe even a Youtube video to accompany it all in the next few days.
Most of you guys will know what it all means anyway I'm sure :)
I currently have 23 PSTs in my possession as I seem to have traded loads away lately :ahhh - but here is my:
I need to adjust it slightly, as I've subsequently noticed that the stamping on the lower, reverse handles can vary to show the Reg TM etc too (so I need to add another column or two to the spreadsheet). But, it's a start :)
-
nice listing..23 :o
:ahhh
-
I had 30 a few weeks ago

But I didn't part with any that I didn't have duplicates of, I'm sure of that ;)
-
Dave that looks like alot of hard work. But a lot of useful information.

-
Well, it's a start. I don't know about you, but I can't remember what I have and don't have, so I needed to list them anyway, but now that I have I can start to categorise and highlight the differences a bit.
The closer you look, the more you notice differences in blade shapes, drivers and so on. I'm not 100% sure, but I think I've identified a 4th blade shape, sort of half way between the "Sabre" and the final clip point shape. I'll have another look tomorrow, but I have two that possibly fall into that category.
I started logging the files according to your discovery about single / double cut teeth, and may have spotted something new there too - more work to be done!
-
Wow, there's a lot of info contained in that spreadsheet Dave.
Hopefully JoeBW will stop by, as he has put together a similar spreadsheet on his PST's. :) -
@DaveK said:
Well, it's a start. I don't know about you, but I can't remember what I have and don't have, so I needed to list them anyway, but now that I have I can start to categorise and highlight the differences a bit.**The closer you look, the more you notice differences in blade shapes, drivers and so on. ** I'm not 100% sure, but I think I've identified a 4th blade shape, sort of half way between the "Sabre" and the final clip point shape. I'll have another look tomorrow, but I have two that possibly fall into that category.
I started logging the files according to your discovery about single / double cut teeth, and may have spotted something new there too - more work to be done!
It gets harder all the time.
Your right about that.
Looking forward to see what you determine on the blade shape.
-
Yeah, I need to get focussed!
I've started typing, and will try to cover everything, but it might take me a while. I'm trying to make it a History article, rather than just reeling off what I have / haven't got, a sort of consolidated version of this thread really, with bits that I've noticed myself and on other threads here all included.
With pics of course.
I'm doing it on my blog initially but will try and do a "forum version" too, and maybe a version for the Wiki. It depends how easy it is to reformat the pics so it all stays legible. It's going to be quite long I think.....
-
i think there might be 3 different phillips drivers at least?
this is me guessing, the one on my pst is as you know dave the old sort centered and quite pointy the one on my sideclip, which im presuming was used on psts too? its a off centred one thats quite blunt is there a off centered pointy one ?
-
I shall have a look as I go through Ryan

In the meantime, tell me what you think of this as a diagram:

-
i like it, well thought out :)
-
Good work Dave.

-
The pic is to make the words make sense when I start going on about plier markings and fasteners and Had wire cutter notch etc.
-
i was going to say put knurled screw instead of fastener, but then thats not what was always used so i say it would be great for someone who has not come across a pst before
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login