Show your slip joint's thread!
-
Kewl looking knife there Sappy.
They sure do come out with some vibrant colours. Good ones to
carry out in the bush. -
thanks. this is one of three bokers i have had. this one has very good springs all around. though F&F is not what i would call great the springs are about perfect for a slipjoint knife IMO. very deliberate.
another shameless pic >:D

-
ok... patiently waiting for my rough riders to arrive and pulled another slippy from the cabinet.
kissing crane whitler has always been a favorite on mine. excellent snap on all blades and very comfortable to EDC.

much to my horror F&F is terrible. side to side blade play is an understatement. the best way to describe it is 'wobble'.... literally... they wobble. funny i never noticed before but today while whitling i became so concerned that i stopped using it even for basic cuts.

i've had this one for about seven years and EDC'd quite a bit but never over worked it IMO. i'm a sucker for carbon steel and the whitler pattern but this one is being retired... for my own good.

-
Shame about the play as it's a handsome little number.
Love the Boker - rowdy looking thing!
-
Yeah it is a shame it has developed wobble. You might ask someone who is in the know but
it might be fixable? -

What does it taste like
:D -
case 6318SS dated 2003. once it's sharp (which can be trying) holds an edge well. fairly weak springs and the sheepfoot blade has hardly any snap. F&F walks all over the the boker and kissing crane that i have. blades are rock solid but dirty



-
Just got this one:

Its the perfect slippie for me. The backspring is just tight enough, I can open it by pinching it (very short brittle nails), and its the perfect size. Only problem is...I'm afraid to carry it.
-
do as you will but that alsdorf is sweet... are the scales linen micarta? closed length?
that's the kinda slipjoint that has few peers. well done.

we need more pics.
-
yeah that alsdorf is a very nice looking knife, never heard of them before.

-
Sorry Sappy, ;) You should have been around here when you could not only change your avatar, but
also your name, now that caused alot of confusion. :D -
Haven't posted any new eye-candy to this thread in a while, finally got some new stuff to change that. I've had this one for a little while, got it back when I got that Remington Repro BSA Scout, and just now got around to snapping some pics.



It's a Bear & Son Heritage Series Jumbo Trapper in Green Jigged Bone. Been wanting one of these since seeing a few a friend of mine has gotten over the last year but I wasn't going to pay the average price they have been wanting for these.....I just as soon get another GEC Pioneer. But when this one came up for sale at $39.95 I jumped at it.
It's 4 1/2" closed with brass liners and pins and lanyard tube, nickle/silver bolsters, and 440A stainless blades. At first glance it's a typical jumbo trapper with some real good looking bone. Overall the F&F is pretty good with even edge bevels, nice mirror polish, decent backspring strength, usuably sharp edges, zero blade play throughout, and a almost gap free fit in build.
On closer inspection it does have a few faults. First is a backspring gap between the backside liner and the secondary blade's backspring, running from the bolster down about a little over a inch. Not quite a hairline but not huge either, I can just barely see light through it.

Second is the finish on the backside head of the center pin. Here it appears the knife wasn't positioned correctly when the machine that finishes off the heads of the pins did its job.....

......it was off-center and cut into both the pin and the bone. Their QC was definitely on break the day this one was made. It doesn't affect anything except make for an unsightly looking pin. But this is something that should not have made it out the door.
But outside of that it's not a bad Trapper, tighten up the QC a bit and this thing would be sweet. For $40 it would make an excellent user. If I paid anymore than that it would have been sent back. For an American made slippie which usually costs in the $60-$70 range they need to do better, and I have seen flawless examples from them. With what they are doing if they tightened up their QC they could be a force in the slipjoint market, but it seems they have a tendancy to fall back into their earlier Bear MGC days.
2xTap
-
Nice 2xtap, love the scales! Thanks for doing these short reviews + pics. Gives those of us
who are interested in value some choice. :) -
Sean,
You're welcome bud. I'll be putting up more throughout the day as I have several more knives I just recently received......a Colonel Coon, some Northwoods, a couple of Rough Riders, and a Schrade.
The Colonel Coon is next!
2xTap
-
I've been wanting some of these since SMKW's revived the brand. But like many other things, once I have the money to do it I wind up getting something else. Anyway, when this popped up on Knives Live at $49.99 on sale, well.....out came the credit card!
It's from the Colonel Coon Autumn Gold Smooth Bone series. These are built by Queen Cutlery and this particular one is based on their large #49 Cattle King Stockman at 4 1/4" closed.



Build is typical with brass liners and pins, nickle/silver bolsters and CC shield, and 420HC blades. The F&F is almost flawless. Aside from a hairline gap running between the backside liner and secondary backspring.......

..........I can't see any light through it but the fine line is there and is about 3 inches long. (NOTE: My buddy Marv picked up this same knife as well about 3 weeks ago and his has the exact same hairline gap as mine, in the same place and almost the same length....odd!)But aside from that faint gap the F&F is perfect. Flawless blade grinds with sharp even edges, near flawless mirror polish throughout, flush fit springs with blades opened or closed, stout backspring tension, zero blade play anywhere, and all built on a great pattern.
And that Autumn Gold Smooth Bone is sweet, polished nice and smooth with a seamless transition between scales and bolsters and not one pin to be felt. Dragging your fingers across the sides of this knife the only thing you feel is the shield. For $50 bucks it's a nice Queen built Stockie!

2xTap
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login