Show off you flashlight mods!
-
I haven't done anything exciting mod wise myself, but this is a great idea for a thread

-
Buy me a small engineering lathe and I'll show you some mods :P
-
that goes for me too
;)
-
Who needs a lathe (I'd love one!)
Here's a mild mag mod I did a while ago
3 Cree XRE LED module fitted with a new driver on a home made copper heatsink, powered by 6AA.



A popular torch in the UK, is the Tesco 2C LED, great mod fodder.....3 Cree XPG's each getting around 500mA from a Micropuck each, powered from 2C cells. Approx 400 lumens for 2+ hours. There's an optic that goes on top of the LEDs, it gives the best smooth beam ever, all flood, but very useful.


Home made heatsink again with the 3 micropuck inside the can. I need to take more pics.
Oh dear, I've a few maglite I'm working on..............
-
I love those short Mag mods - gonna make any for sale?
-
Well OK, 2D isn't as short as some mods for single 18650's but they still look cute compared to all the really long ones. Shortest I have is a 3D, and I would love throw a brighter drop in in it and give mine to a friend.... any ideas on that front?
I don't mind changing from D cells either :)
-
@nuphoria said:
Well OK, 2D isn't as short as some mods for single 18650's but they still look cute compared to all the really long ones. Shortest I have is a 3D, and I would love throw a brighter drop in in it and give mine to a friend.... any ideas on that front?I don't mind changing from D cells either :)
What bulb/emitter do you have in at present?
-
Well, I am not technically savy enough to do home-built mods myself. I usually buy them already done or Lego things up. This first one I put together piece by piece as money allowed.

It's a PEU Pineapple body which has a McGizmo McTC tailcap with a single stage McClicky module installed. It's all topped by a Tactical Lighting Solutions Striker Bezel unit with a CREE Q5 LED emitter. It's all Surefire E-Series compatable. Here it is alongside my slightly legoed Surefire 6P Defender (this SF uses a 6PD body and head, but the head now houses a Solarforce CREE R2 drop-in. Attached is a Detonator cell-extender and a Leef tailcap with a single-stage McClicky tailswitch).....

Another that I have is a ElektroLumens modded 3D Maglite. It's the black one with the huge bezel.........


It started life as a regular stock 3D Incan Maglite which Wayne over at ElektroLumens did his magic to. He basically cuts off the switch holder light post, wires up the switch and LED directly, and presses in a custom made heat-sink. He used the factory reflector, just cut the tail off and opens it up for the LED. It's direct drive, no regulation or any fancy circuitry and can run off of Alkaline or NIMH D-cells. The LED is a C-bin SSC P7, rated at a max output of around 900 Lumens. I run it on alkalines so I am only getting about 650-700 Lumens out of this thing, but on fresh cells it'll run a good 4 hours or so at max output.

I removed the factory lens and installed a UCL glass lens as well as a KIU stainless VL Bezel with GITD teeth holes. The red 3D Maglite next to this ElektroLumens one has a Terralux SSC P4 LED drop-in with a KIU stainless LP bezel.
I have a few others but they are real simple lego mods, nothing special.
2xTap
-
Not much of a mod to look at, but my A2 had been fitted with a high output lamp, uprated LED's, GITD paint in the LED assembly and GITD O-rings (which aren't pictured below);






-
Closest I've come to torch mods is a few simple drop-ins on my maglites (no actual modding required TBH :D). Love your stuff though Essexman.

-
Great mod's so far guy's, keep them coming

-
Hmmm, I've done a lot of mods, but they just look like a stock lights. I've done emitter swaps, driver swaps, and other minor stuff. Built a nice Surefire E1L pocket rocket before, but sold it.
So, nothing fancy to show...
-
Doesn't have to be fancy

-
Well OK, 2D isn't as short as some mods for single 18650's but they still look cute compared to all the really long ones. Shortest I have is a 3D, and I would love throw a brighter drop in in it and give mine to a friend.... any ideas on that front?
I don't mind changing from D cells either :)
What bulb/emitter do you have in at present?
Honestly can't remember! It's probably a Terralux, something like 100-150 lm-ish. I will give that one away if I can throw something brighter in there instead.
Loving the mods guys :D
-
@gunga said:
Hmmm, I've done a lot of mods, but they just look like a stock lights. I've done emitter swaps, driver swaps, and other minor stuff. Built a nice Surefire E1L pocket rocket before, but sold it.So, nothing fancy to show...
Same here. I'll try to post my slightly modded Novatac and Elektrolumens Blasters when I'm unpacked.
-
I forgot my Blaster (which has switch probs BTW Terry :()
-
Simple mod for owners of a Surefire E1E (incan)
All you need is a RCR123 (3,7 V), a defective bulb,
a 0,5 W 5mm Led and a resistor (approx. 3 Ohm).




18 Lumen and 6 h runtime.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login