THE Crunch Owners Thread
-
There's a Crunch club too?
0303 - Small screwdriver was modified to an awl out of necessity. Nothing fancy, used it for just about everything, and it really got worked out during arc welding classes. Used to EDC it with a Wave.
http://s850.photobucket.com/albums/ab66/Xelkos/Mr_Crunch/ -
Everything has a club here :D
-
I am still looking for the hair club for men?

-
Now that is a worthwhile club

-
Now that is a worthwhile club

says a man with more hair on the back of his hands than on my whole head :D

Here you go guys... :P :P
-
Unfortunately, I am bald. :(
-
Sharing is... /forgot

@Leatherman said:
Jim,
The Crunch was first introduced in 1999 just a year after the first model of the Wave and shortly before the Pulse. The Crunch was actually Tim Leatherman's original idea for a multi-tool but unfortunately he did not have all of the manufacturing capabilities to make it in the late 1980's. There have been slight manufacturing improvements over time but you’re correct in saying that no Anniversary models have been manufactured. I will pass this idea on to the design team about some type of limited edition Anniversary Crunch in the future. Michael @LTG -
And I'm back!! Got a crunch in the mail today, love it! I think it will stay on my belt with my pulse. Problem is, now I have 3 LM's on me, the pulse, crunch, and juice SC2. I can't decide which to carry! Does that make me weird?
-
@Mercury said:
Problem is, now I have 3 LM's on me, the pulse, crunch, and juice SC2. I can't decide which to carry! Does that make me weird?That depends on whether you mean "out there in the world amongst normal people" weird...
..or "on the web with a bunch of people who spend their free time talking about their multi-tool collections" weird.
-
@Mercury said:
And I'm back!! Got a crunch in the mail today, love it! I think it will stay on my belt with my pulse. Problem is, now I have 3 LM's on me, the pulse, crunch, and juice SC2. I can't decide which to carry! Does that make me weird?Yup, I can see a problem. No bit kit, bit extender, or flashlight.
EDCing Surge, bit extender, Serac x2 + Juice KF4 on left. Bit kit and removable bit driver, two special bits on right. There's no problem, premium sheaths carried horizontally - with a leather belt.
-
R.I.P. Crunch 0303
After 6 years of faithful service, my Crunch is going back to Leatherman for either a proper burial or to be reclaimed into another tool. This has fixed bicycles, to being a portable vice, and even been used in an arc welding class. Last night was trying to cut a stainless steel buckle in to to get the thing off, used it as a vice, and the pliers crumbled in my hands. Sat there in disbelief. :'(
-
That is an interesting bit of the history of Leatherman Tools, and one that deserves wider distribution. I knew from the Wikipedia article that the early Leatherman was called 'Mr Crunch' but I'd no idea that the initial idea was for locking pliers. Thanks for posting it; if there was a system of rating posts on the forum, you'd certainly get top rating from me.

@Xelkos said:
Sharing is... /forgot
@Leatherman said:
Jim,The Crunch was first introduced in 1999 just a year after the first model of the Wave and shortly before the Pulse. The Crunch was actually Tim Leatherman's original idea for a multi-tool but unfortunately he did not have all of the manufacturing capabilities to make it in the late 1980's. There have been slight manufacturing improvements over time but you’re correct in saying that no Anniversary models have been manufactured. I will pass this idea on to the design team about some type of limited edition Anniversary Crunch in the future. Michael @LTG
-
Xelkos, that is one very sad looking Crunch :'(
Hope you get a nice shiny new one in return

-
Found this thread, and reviving the dead. :) Big time Crunch devotee here. No replacing a dedicated tool of course. But this original LM design is a improvisers dream. From rusted nuts , imperial or metric, to water hoses. I've coated the jaws with duct tape to prevent marring on plated surfaces, etc. Used it for a 1/4'" drivers of all types. Used the jaws slot for reciprocating blades and the diamond file from a Surge. Combined with another tool of your choice it truly allows one versatility. Long live the Crunch.

-
Just got one of these for fun, finally found a cheap one on the forums (usually they are WAY more than a used Wave or Juice). It's really cool! I can see them updating it with a bit driver ect. someday, but really there isn't a lot of room in there for much, so I suspect you would have to sacrifice one flat head and the philips to add the bit driver, but wouldn't be the worst trade off. Mine is marked 09/10 on one side but the quality is old school, the implements seem to be stamped/cast and well polished like say on the old model Wave rather than the functional but somewhat ugly MIM parts you see in most current Leathermans. The locking tab might be MIM or cast, I can't tell, as it's very well polished. Love the little serrated blade, Sharpmaker with ultra fine rods made it wickedly sharp.
-
@Marlinaholic said:
Just got one of these for fun, finally found a cheap one on the forums (usually they are WAY more than a used Wave or Juice). It's really cool! I can see them updating it with a bit driver ect. someday, but really there isn't a lot of room in there for much, so I suspect you would have to sacrifice one flat head and the philips to add the bit driver, but wouldn't be the worst trade off. Mine is marked 09/10 on one side but the quality is old school, the implements seem to be stamped/cast and well polished like say on the old model Wave rather than the functional but somewhat ugly MIM parts you see in most current Leathermans. The locking tab might be MIM or cast, I can't tell, as it's very well polished. Love the little serrated blade, Sharpmaker with ultra fine rods made it wickedly sharp.
A tad awkward
Much better ;) :D :D -
Hey Mat buddy whats that knurled gizmo stuck in the end of your MT.O tool?
-
Hey Mat buddy whats that knurled gizmo stuck in the end of your MT.O tool?
It's the Crunch's adjustment bolt :D :D. It does not fit tightly into the MTO bit kit unfortunately , it is just resting in it in the photo.
Now that you have explained it to me, it is quite obvious isn't it.
:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login