Paladin PT-540
-
LOL, yeah they are pretty expensive- I bought mine for like a 110 usd
-
-
And I thought the Powerlock was a hand filler,even for someone my size.I'm going to ask my daughter to check out the Menard's in her part of the world.
-
-
-
-
-
Blimey, that really is one big tool aint it
I remember saying to Dunc that I didn't like the Free hand because it was just that little bit too big for belt carry, well next to that it makes the free hand look like an MP400 
-
Here's a picture of Bob with the PT-540 in it's handy sheath:

Def
-
@Defender said:
Here's a picture of Bob with the PT-540 in it's handy sheath:
Def
Probably not that wide of the mark 
-
-
Very nice indeed! I too have been wanting one of those for quite some time. I'm kinda surprised at the massive size of the thing. Now its got me wondering if SOG is basing the yet to be released Powerassist on the "smaller" Powerlock frame or this larger Paladin one???
-
-
With all the holiday duties going on there hasn't been any opportunities to put the PT-540 to work. In the mean time I've been comparing it to a regular PowerLock. Lots of improvements, some obvious, some subtle. Here's two:
I'm not a real big fan of the SOG "flappers" - those grip protectors that are on the PowerLock handles. The PT-540 has them too of course, but they are much improved. The metal is formed into shape more crisply, there are detents that hold the flappers closed more securely, and there are little stop-tabs stamped out of the handle metal that prevent the flappers from being bent in too far. All worthwhile improvements!


Blade locks are made from cast metal instead of stamped. They now ride "inboard" on the handles, instead of hanging over the sides.

-
@J-sews said:
Somehow I'd assumed it was built on the same frame as the PowerLock? But nope, she's a full half inch bigger at least.The PT-525 is based on the PowerLock but the PT-540 is another breed. Here's a link to an old topic with a photo of the PT-540 next to the PT-525: /topic/802 (comparison photo is on page two)
And here's an excerpt from that post:
Here's a photo of the PT-540 and the PT-525 side by side.
Whoa! I didn't realize the 540 was so much bigger than the 525! That thing must be approaching the Surge in the size and weight catagory.
Like Mike D, I've also wondered whether the PowerAssist (see photo below) will be based on the PowerLock or a larger frame like the PT-540. The pliers on the PowerLock 2.0 are nearly identical to the pliers on the PT-525.
I've had my PT-540 for about a year now and I'm happy with it overall. Here are a couple of quibbles: 1. The wire cutter isn't as good as the wire cutter on the PT-525. 2. The cast lock releases are prone to rust (I recommend putting a light coat of RenWax on them to prevent rust). 3. The hex wrenches on the handles require a lot of clearance. 4. The hex wrenches stick out from the handles so the handle isn't as comfortable to grip when using the internal tools (in comparison to the PT-525 and the SOG PowerLock).

-
Yep, all is not wonderful with the PT-540.

One thing that I found disappointing is the blades and tools. Despite having LOTS more room in those oversized handles, the blades are all standard SOG length. The knife blade, the file, the saw blade: each one of them should be about 1/2" longer than they are.
What's the sense of having longer handles if the blades inside them are all standard length?

-
The ability to use off the shelf parts?
Def
-
@Defender said:
The ability to use off the shelf parts?Def
The PT-540 will accept any of the off-the-shelf SOG implements.
But its so BIIIIGGG!! It just seems like they should have put some bigger-than-standard tools in it. Y'know, like screwdrivers with extra long reach. Or a saw blade with an extra half-inch of stroke. Important things all.
-
Good reports on the PT 540, thanks!
I too wish they would do away with the flappers completely, why not just go Swisstool like and put all of the tools on the outside of the handles where they should be so you don't have to open the plier to access them. It looks like from the picture of the Powerassist that half the tool is going to be like this anyway, so come on SOG just make both handles the same and ditch the flappers once and for all. AND, if I'm going to wish for things why not take the whole powerassist idea one step further by putting not just one blade, but two blades (one straight and one serrated) on the outside position of the handles with thumbstuds and powerassist, and on the other handle rig up a very long bladed saw and some big usable scissors with the same setup?? Sound good? Does to me...I would love to be able to just flick open my most used tools

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
