Show us your flashlights.
-
Terry, thanks for all the information. I'll consider the different charging systems for
this type of battery. What I need in a "battery" is for it to power the 335 Lumen Fenix
for at least an hour. -
@Sean said:
Terry, thanks for all the information. I'll consider the different charging systems for
this type of battery. What I need in a "battery" is for it to power the 335 Lumen Fenix
for at least an hour.Do you know what cell Fenix bases the 1.9 hour runtime on, and how accurate that runtime is? If it's based on 2xCR123, you should be good with a 2200mAh 18650 cell. A 2200mAh 18650 has about 87% of the VA capacity of 2xCR123, so it should give you about 87% (rough estimate) of the runtime. Even if the runtime is based on a 2900mAh cell, you're still at 75% of that capacity with a 2200mAh cell.
...actually, that's why I wouldn't buy the 2900mAh when I can get 75% of the capacity for 50% of the price in the 2200mAh cell. The 2900mAh is a fantastic cell though, if it's within your budget, and will definitely give you great runtimes in the TK15.
**
VA:**2xCR123: 2 x 3.0V x 1550mAh = 9.3VA
18650 (2200mAh): 3.7V X 2200mAh = 8.14VA
18650 (2600mAh): 3.7V x 2600mAh = 9.62VA
18650 (2900mAh): 3.7V x 2900mAh = 10.73VA -
Good info, thanks again Terry. They base their times on primary cr123's. I was using
rcr123's and of course I always take a hit on runtime with those as with primaries are
around 1300 ma, and the rcr's, around 600 ma or so.
I did line up a WF-139 and two Trustfire batts for $25 so we'll give it a whirl and see
how we do. -
@Sean said:
Good info, thanks again Terry. They base their times on primary cr123's. I was using
rcr123's and of course I always take a hit on runtime with those as with primaries are
around 1300 ma, and the rcr's, around 600 ma or so.
I did line up a WF-139 and two Trustfire batts for $25 so we'll give it a whirl and see
how we do.I stopped using RCR123 some time ago. They're really disappointing in capacity, even when buying good brands. I have a pair of AW's that i purchased one year ago that have a tested capacity of about 530mAH each. 2 x 3.7V x 530 = 3.92 VA. NOT GOOD.
Anyone want a free pair of AW RCR123 cells?
@Sean said:
I did line up a WF-139 and two Trustfire batts for $25 so we'll give it a whirl and see
how we do.Wow. It's hard to go wrong with that little of an investment!

-
I did line up a WF-139 and two Trustfire batts for $25 so we'll give it a whirl and see
how we do.Wow. It's hard to go wrong with that little of an investment!

Hm... yeah that's pretty expensive. I swiped a bunch of protected 18650s from an old laptop battery back and got that cheap Shekor charger they were crowing about on CPF. Only $10 all told.
-
Terry thats a nice collection of Peak lights. 8)
-
I did line up a WF-139 and two Trustfire batts for $25 so we'll give it a whirl and see
how we do.Wow. It's hard to go wrong with that little of an investment!

Hm... yeah that's pretty expensive. I swiped a bunch of protected 18650s from an old laptop battery back and got that cheap Shekor charger they were crowing about on CPF. Only $10 all told.
The price of new Li-Ions vs. used is relative, I guess, since they have a shelf life and generally don't live long in hot laptops. The Shekor charger looks pretty good since it has CC/CV, but how much capacity is left in those 18650s? Free is free, but If they're down to near 1/2 capacity, they're not worth the bother of scavenging, IMO.
I've pulled plenty of 18650s from laptop packs, but I wouldn't recommend it to just anyone on a forum due to the risks involved. I would rather suggest they buy some decent $5 protected cells, especially since most laptop cells are unprotected.
-
Picture of my edc collection:

-
@NutSAK said:
I've pulled plenty of 18650s from laptop packs, but I wouldn't recommend it to just anyone on a forum due to the risks involved. I would rather suggest they buy some decent $5 protected cells, especially since most laptop cells are unprotected.These are protected cells. I was measuring out the voltage after a week of storage post-charge as 4.1V lowest to 4.13V highest, so capacity isn't bad. As it is, I have only one (extremely cheap) 18650 so it made little sense to drop a lot on good batteries and a charger. If I decide it's a route I want to take, I'll invest more in the future.,
-
Vladimir, nice flashlights.
How do you like them? Do what you need 'em too?I just picked up my WF-139 charger and 18650 batteries so anxious to see the
runtime on the TK-15 on high tonight after work. -
@Sean said:
Vladimir, nice flashlights.
How do you like them? Do what you need 'em too?I used them in my edc rotation.
Beside this flashlights, I also use Streamlight Nano, Photon Micro II and Petzl Tikka 2.
I received Fenix E05 yesterday and I'm extremly satisfied with the quality and performance. -
Sounds like your well set there for awhile. I'm enjoying the Fenix brand of late as well.
Nice tint, and fairly inexpensive compared to what I'd been buying recently. -
Yup, I'm pretty much all set now, my slightly modded Surefire 6P and Fenix E05 will probably be most frequent as my edc.
I just ordered some AAA Eneloop's for E01 and E05, so I'm good for now. -
-
Some of my collected flashlight :
Olight M3X:

Jetbeam III M R5:

Nitecore D11 and EX11



-
Why my pictures can show ?
-
-
Nice lights mate 8)
-
Yeah, that's a nice set. Welcome to MTO!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

