Not what I expected- New Leatherman Tools
-
I think it's hard to complain about them given the very low price point. Though I'm still less than convinced about the file shape. Lets see what they cost when they come to the UK though. ::)
-
@Santos said:
here in australia the laws vary from state to state.In a nutshell in NSW (as is my understanding) carrying blades have to have a 'legal purpose' so carrying one for the sake of it is a no no. Still as a tradesman i have a purpose :P
In practice though you can carry a sak or a multitool and unless you a silly enough to draw attention to yourself its never a problem. Cops don't really comb the streets stopping people in search of blades. Most cops also excersise a degree of discretion anyway.
I am happy that they are locking tools, i'm certain despite all the forum ettiquete that several of our UK brethrens EDC Blasts, Waves, Powerlocks everyday. They just keep their noses clean and stay smart about how they go about doing it.
I can't wait to get a sidekick
(also now i may hold off on buying a BLAST for my mother to replace the KICK i won on this forum.... between now and september they may have another price drop)The law is kinda similar to that in Israel, here everything sharp is considered a knife, and you must be carrying that specific knife for a reason (a machete for cutting you food for example would only make the judge laugh). Self defense would only be acceptable if you are threatened by something or someone.
Luckily, All multitools are allowed for everyone (though cannot be sold to youth) anywhere, though security in public places are not likely to let you in with a large multitool.
As for the new tools- they look great, but I think that silly opener on the Wingman is useless, and the design of the scissors design is bad. The Sidekick has the right tools, except for the combo blade. Why would I want a combo blade when I have a separated serrated blade?
That file might be small, but the tasks expect from a tool of this size are nail filing and some simple wood filing - I'm sure it can handle this.
-
OH MY GOD I NEED A WINGMAN NOOOOOOOOOOWWWWWWWWWWWWWWWW!!!!!!!!!!!!!!!!!!!!!!!!!!
-
-
@Dunc said:
Grant do these two new tools have locking Blades ? If they do lock and they are replacing the non locking Kick I think that is a bad move .Dunc
The inside tools don't look "locking" but more of the pressure-spring type seen on PST & Juice. Not sure I like that, would rather had them like the original Super Tool. But the liner locks look to be there.
Why is England so down on locking blades, they want more accidents in the health-care system?
-
@MTguy said:
These pics make the tool look much better than the stock photos. At the price I'll probably pick one up.... I'm liking that carabiner, looks good.I agree with this.
3D Phillips and size-wise, it actually stacks up nicely to the Blast.
I want more info on that file, though. Looks pretty short for real work (and no diamond coat :ahhh). Could you actually resharpen a shovel or rototiller blade with it? I do that regularly with my Charge ALX...
I'm starting to warm up to this entry level tool. :)
Edit to add: I think Grant's pictures do the tool much more justice than the stock shots--I thought this was going to be Juice or Squirt sized.
-
@Xelkos said:
Why is England so down on locking blades, they want more accidents in the health-care system?Those weird english government folk think that locking blades are the reason for accidents in the health care system...

If only they knew better...(I meant no offense to anyone related to England, a government, a health care system, or a locking blade)
:D
-
@Xelkos said:
Grant do these two new tools have locking Blades ? If they do lock and they are replacing the non locking Kick I think that is a bad move .
Dunc
The inside tools don't look "locking" but more of the pressure-spring type seen on PST & Juice. Not sure I like that, would rather had them like the original Super Tool. But the liner locks look to be there.
Why is England so down on locking blades, they want more accidents in the health-care system?
Given the actual carry laws in other Counties I still think the UK (
) has it relatively easy. ;)It's not even a Statute Law, it's a bit of Case Law i.e some layer convinced a Judge that a lock effectively makes a folding knife into a fixed knife.
The Statute Law says you need a good specific reason to have a fixed blade ( i.e a gutting knife for a fisherman) but no reason to have a folding knife with a cutting edge of less than three inches. So the Case Law basically redefined locking knives as fixed blades, not folders. ::)
-
I think it's hard to complain about them given the very low price point. Though I'm still less than convinced about the file shape. Lets see what they cost when they come to the UK though. ::)
I reckon £45.
I think that's too much :-\
I think if Leatherman are aiming at a certain end of the market then that should be the case across the board. A Wave sells for approx £70 here. If it was me I'd be thinking 'should I save a bit more and get this fancy Wave?'

These should be priced so low that buying one is a no brainer. The Gerber Suspension seems to sell well from Amazon; it is currently £30 but I think it went as though as £22 / 23 :o :ahhh
-
I think it's hard to complain about them given the very low price point. Though I'm still less than convinced about the file shape. Lets see what they cost when they come to the UK though. ::)
I reckon £45.
I think that's too much :-\
I think if Leatherman are aiming at a certain end of the market then that should be the case across the board. A Wave sells for approx £70 here. If it was me I'd be thinking 'should I save a bit more and get this fancy Wave?'

These should be priced so low that buying one is a no brainer. The Gerber Suspension seems to sell well from Amazon; it is currently £30 but I think it went as though as £22 / 23 :o :ahhh
You can get a Wave for £70 but full retail is more like £100 isn't it? :-\ Heck, the Fuse is supposed to be something like £60. ::) So if full retail was around £45 (and that seems like a slightly optimistic guess, but hopefully not more) then we might reasonably be able to pick one of these up for about £30.
-
Lets hope the price is reasonable. Would make nice gifts for a few folk I know.
-
For the price point, the Wingman looks extremely attractive to me. I'm somewhat fond of it honestly. It may just find itself onto my "must buy" list.
-
-
I knew something looked off about that Blast, but I couldn't put my finger on it.
-
im not tto pleased like a few people with leathermans new ways im thinking the victorinox are now the best multitools out there for normal people obviously leathermans higherspec stuff is great and i will not doubt that but some sillys moves have been made already this year.
-
Not having seen the new stuff , can't really comment . That said , what they have rolled out is pretty dissapointing ! I was hoping for follow on MUT types , and maybe a tweaked Skelle .
Chris
-
I like the Wingman/Sidekick because it is entry level. I agree that LM has made a couple questionable choices of late, but I think this move is a good one. It helps take some of the market currently held by cheap knockoffs and no-name tools. That's a huge chunk of buyers right there. If someone can get a $30 Wal Mart brand tool, or a $30 LM, there's a fair share of buyers who will take the LM. Having an entry level tool like this is, and one with an interesting design to boot, will be a big boost to LM. Myself,I think it'll be great to be able to get a cheapo beater multi without having to buy some POS knockoff.
-
@thebullfrog said:
I like the Wingman/Sidekick because it is entry level. I agree that LM has made a couple questionable choices of late, but I think this move is a good one. It helps take some of the market currently held by cheap knockoffs and no-name tools. That's a huge chunk of buyers right there. If someone can get a $30 Wal Mart brand tool, or a $30 LM, there's a fair share of buyers who will take the LM. Having an entry level tool like this is, and one with an interesting design to boot, will be a big boost to LM. Myself,I think it'll be great to be able to get a cheapo beater multi without having to buy some POS knockoff.That's a valid point.
If pumping out these lower price point tools allows them to continue their higher quality, higher priced tool development, then I'm all for it.
...and don't forget, they're backing these with their 25 year warranty as well.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
