Not what I expected- New Leatherman Tools
-
@thebullfrog said:
I like the Wingman/Sidekick because it is entry level. I agree that LM has made a couple questionable choices of late, but I think this move is a good one. It helps take some of the market currently held by cheap knockoffs and no-name tools. That's a huge chunk of buyers right there. If someone can get a $30 Wal Mart brand tool, or a $30 LM, there's a fair share of buyers who will take the LM. Having an entry level tool like this is, and one with an interesting design to boot, will be a big boost to LM. Myself,I think it'll be great to be able to get a cheapo beater multi without having to buy some POS knockoff.That's a valid point.
If pumping out these lower price point tools allows them to continue their higher quality, higher priced tool development, then I'm all for it.
...and don't forget, they're backing these with their 25 year warranty as well.

-
That was something I asked about- would these entry level tools be covered by the same 25 year warranty, and the answer was yes. Leatherman will still stand behind them 100% as the quality of manufacture hasn't changed on these, even though the fit and finish may not be up to their usual standard.
I know many of us are going to get one or the other (or more likely both) simply because we are hardcore junkies, but Leatherman stands to make a killing with these, running them at this price point. You will start to see these at Ace Hardware, Wal Mart, Home Depot, B&Q and pretty well anywhere else you can buy tools. Leatherman is using these to introduce the Leatherman brand to people who wouldn't spend a lot on a tool, who know nothing about tools, and who wouldn't normally even put enough effort or thought into one to bother doing research on sites like this one to find out about which one is best.
I's an interesting concept, and I'm sure with the sheer volume of tools they are likely to sell at that price point that they will make a fortune, even if they only make a dollar off each one.
Def
-
Grant are we going to see some more camo Blasts like the one in the pic you posted earlier? :)
-
It's also about building brand loyalty from people who normally wouldn't look twice at LM. Get people who would normally grab a no-name tool to buy these. Most everyone has at least heard of LM, so seeing one they can afford will entice a lot of buyers, after that, when they see the quality is better than X brand they are likely to buy another LM down the road, possibly something more like a Wave.IT's a brilliant move by LM IMO. As long as the quality is up to snuff it could be a huge new market for them. I may rip on Gerber a lot, but a TON of people buy them. So long as the quality is at about Gerber level, which while not that great, is still a bit better than knockoffs, then they may grab a lot of Gerber's thunder, especially if the quality winds up being above the likes of the Suspension, etc. I think this will mark the first real competition Gerber has had at the low-end of the name brand market and may force them to start upping their quality since price alone won't be as big a factor any more. The entry level multi world may be about to start getting a lot more interesting.
-
@David said:
Grant are we going to see some more camo Blasts like the one in the pic you posted earlier? :)I would like to know this as well, looks interesting.
I think the sidekick/wingman will sell tons, and it would be a good thing if people replace their no name junk with a good quality tool. So no doubt it's a great move for LM to make as it will get them in the cheaper market.
-
I am thinking i want one of each. For me i am liking smaller lighter tools. They are just easier for me to carry. So they are smaller (i don't know if they are lighter) and they are priced low and should be easy to find in big box stores. I hope the tools work well like Leatherman is know for. After reading this thread i can see that leatherman along with other multi tool companies have missed. Why not when designing a multi tool make it so you can remove the blade and lock so all your tools could be used all over the world. All so sell replacement TH blades with install tools for those that need them to make their tools leagel in their countrys. I find it hard to compare leathermans new tools the Gerber Suspension. The Suspension is heavy odd sized for me to pocket carry and heavy in a pouch on my belt. The tools are the real question on the new Leatherman tools if they live up to their past reputation i am thinking they will be a lot better than gerbers.
Mike
-
The SOG Powerlock, and Pocket Power Plier already do exactly everything you just asked for.
-
@thebullfrog said:
The SOG Powerlock, and Pocket Power Plier already do exactly everything you just asked for.Yes but, crucially*, the sales of the Powerlock and the PPP don't make Leatherman any money. :D
Crucially for Leatherman anyway. ;)
-
I wonder if it will matter that the inside tools don't lock. Gerber tools do. It will be interesting to see if it makes a difference.
-
I'm in the press room at the show on my netbook, so I can't post pictures yet, but I did go back to Leatherman today and took a lot more detailed shots which I'll post when I get back to the hotel.
I'm knocking off early today- my bad foot is killing me!
Def
-
@Grant Lamontagne said:
Leatherman is using these to introduce the Leatherman brand to people who wouldn't spend a lot on a tool, who know nothing about tools, and who wouldn't normally even put enough effort or thought into one to bother doing research on sites like this one to find out about which one is best.So these are for stupid people then? ;)
-
Some might not of expected these tools from Leatherman, but I had my suspicions. After putting out a top line of expensive and niche like tools, it seems that they are now looking to pump some out in mass. they are looking to almost recession proof themselves, which is hard to blame. In the mean time, they are also tapping into a potential new market. Hitting two birds with one stone in the retail marts. A great business move, in my opinion.
-
@genevabuck said:
Some might not of expected these tools from Leatherman, but I had my suspicions. After putting out a top line of expensive and niche like tools, it seems that they are now looking to pump some out in mass. they are looking to almost recession proof themselves, which is hard to blame. In the mean time, they are also tapping into a potential new market. Hitting two birds with one stone in the retail marts. A great business move, in my opinion.A very fair point. It's absolutely worth keeping in mind that the Kick and Fuse (surely their current 'everyman' designs and the ones being replaced) will be seven year old designs this year so they're getting on a bit. Only the Juice and the Micra are older and still in production.
Actually I was surprised to read in out time-line just how long the Juice range has been around; 2001, Who'd have though? :)
-
@Grant Lamontagne said:
Leatherman is using these to introduce the Leatherman brand to people who wouldn't spend a lot on a tool, who know nothing about tools, and who wouldn't normally even put enough effort or thought into one to bother doing research on sites like this one to find out about which one is best.
So these are for stupid people then? ;)
I resent that.
:P
-
Who wants pictures? :D















Enjoy!
Def
-
Funny, Gerber is finally putting longer usable drivers and such on their new
tools, and Leatherman seems to be going with the short and stubbies, and
is that not a 3D phillips driver on the Wingman? What the hell is going on
here? :D -
Ahhh, I get it now.
I didn't understand what you meant earlier about the new "push out" screwdrivers. But now I do. Thats the phillips and the flathead there in the top photo...just push on them through the cutout in the handle to get them started opening. Pretty slick. 
@Grant Lamontagne said:


Enjoy!
Def
-
Great pics! These have grown on me a lot, I'll end up with at least one of them. The "push through" tools are a neat design. I wish the file wasn't so stubby though.
-
I'm getting a weird "2.5 D" feeling from the Phillips. Like it's 3D for, say, Phillips #1, but 2D for #2 and 3s?
I have some respect for the cost-cutting ethic at work here, but it'll be a question of quality of materials if they hold up. Using thinner stock for the tools, more stamping and less casting, and considerably less finish machining means they can turn the tool out on the cheap...I'm just hoping the steel they're using is one that's actually strong enough to stand up to use at that thickness.
Just wondering...do these clump? I figure the between-tool washers would be gone as a cost cutting measure as well.
-
Dear LM, please come out with "enthusiast" versions. Here's what I want in a Wingman CX: PE, upgraded steel blade, awl instead of the package opener, and a dedicated small driver (like on the Spirit). MSRP $40, available for $30. I want one so bad. I wouldn't buy one myself here's my idea for a Sidekick CX: same blade as the Wingman CX, and a diamond file instead of the regular file. Replace the serrated blade with an awl. MSRP $50 available for $40. Please, please, please.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login