Project Skeletool almost done..... (WARNING: Pic Heavy)
-
Hey evil what tools did you use to machine the new components for this skeletool?
-
@Tsquare said:
Hey evil what tools did you use to machine the new components for this skeletool?*Hey Tsquare. I don't use much more than anything that you'd find in a home workshop. Nothing high tech or fancy like a cnc machine or mill. All my mods are hand-made with basic, traditional tools. Drill press, grinders, sanders, various rotary tools. Detail work is done over a modified parts washer to keep the temperatures down. Really low-tech. After years of sending parts out for bead blasting, I finally got my own set-up the other day. I still need to make some sort of booth. If you've never bead/sandblasted, let me tell you, it'll make one hell of a mess of your work area.....
~ evil ~*
-
Very nice! I use those kinds of clip regularly for my radio's.

-
Thanks for the info that is very encouraging.
-
I want your babies in hopes that they will become my sweatshop modders. O_O
-
Hay Evil,
Nice work REALLY! I am very impressed!
Thank-you for shareing -
Im shocked noone else has asked but.... are you willing to fabricate and sell some of those custom parts?
I wouldn't hesitate on buying a MUT-hammer! -
Excellent work. It's a shame that Leatherman didn't introduce this as the Sidekick...
-
@lictor4 said:
Im shocked noone else has asked but.... are you willing to fabricate and sell some of those custom parts?
I wouldn't hesitate on buying a MUT-hammer!+1 If on the off chance you decide to do this, put me down for a MUT hammer and one of those thumb studs

Seriously though, this is some really nice work! I wish I had access to better machinery

-
plus all and rep id buy in...i couldent make the thumbstud..i tried already with massive failure lol..

-
very impressive. I would buy a hammer also!
-
I shall drag this up from the depths for 2 reasons. One is to say bloody brilliant.
The other is to ask, what's the current state of progress? :D -
*Hey gang. Evil here again, after a long hiatus. As for the current state of progress on Project Skeletool... it has been my faithful EDC since I left MTO a while back. That said, now that I am back, I want to complete the caribiner area so that I can call this project complete, however, I have other pending projects to square away frist. I should be getting another Skeletool back from Leatherman anyday now. So, who knows, if I find the spare time between everything else, I may create a version II of this project. I've had ideas for one for quite some time.....
~ evil ~ *
-
Good to hear, been wondering where you ran off too.
-
Welcome back Ev!

-
So good to have you back, can't wait to see what you do next.
-
It just wasn't MTO without you. Good to hear from you again

-
I really like those scissors...

-
*Hey gang, sorry a bit late on my replies.....
*@thebullfrog said:
Good to hear, been wondering where you ran off too.Thank you, bullfrog. Life happens.....
Thank you, Bob

@sawman said:
It just wasn't MTO without you. Good to hear from you again
Thank you sawman!
I did miss modding my tools.....Thank you edc. The lack of scissors is often a deal breaker for me. They probably get used more regularly than any other implement on any of my tools.....
Ok, now for a well overdue update. While the Skeletool has been one of my favorite multitools, I always felt the knife was too small in relation to the rest of the tool. Rather than feel like a plier-based tool with a decent knife, I wanted to shift the feel of the tool to a formidable folding knife with pliers, if that makes sense. I had quite a few different blade steels on hand to choose from. Since this is my every day tool and is frequently exposed not only to the environment but chemicals as well, I chose to go with S30V this time around. I have a (standard thickness) D2 version underway for my beater Skeletool that will be a direct-swap (other than straigthening the frame). In fact, I am revisiting my older projects and upgrading all of their blades. I hooked up with a third generation, family owned, heat treater that knows his craft. The good part is that he is willing to barter his services for mine. This time around all I had to do was airbrush a shirt for his kid lol. A win-win situation.....
~ evil ~
Here is the new blade that I shoehorned into my Skeletool compared to a standard Skeletool blade. The size difference is obvious. By bringing the cutting edge back towards the pivot bolt, it now has even more cutting area than a Wave/Charge. Thicker than any blade you'll find on other Leathermans, even a MUT, I had a few clearance issues to deal with. The frame was stretched, straightened and discreetly clearanced. I also had to do a minor re-shaping of the liner lock. Keeping true to the flow of the curves and design of the Skeletool, the new blade sports a similar profile.....*

Here is the thumbstub that I created for this blade. Here you can see how the curves match that of the blade spine. The curved rear portion matches the curvature of the pivot bolt. I know someone had asked me about this before either on this or a different mod about my thumbstuds and how I keep them from turning. I figure this is a good a time as any to answer. In addition to the primary bolt holes, what you can't see are another set of holes drilled only partially through both surfaces. By installing a very small ball bearing the thumbstud is unable to rotate.....

Another view of the thumbstud. Here you can better see how the thickness and width taper towards the tip. Easily accommodating the full width of my thumb, it is by far the most functional one I have ever used to date, mine or otherwise.....

Yet another view of the thumbstud. Here you can see that I brought the primary bevel as far back as possible to maximize cutting edge.....

Here is the backside of the blade. Relief cut at bottom eliminates pressure from the nodule on the liner lock. On Leatherman liner locked blades, the nodule applies pressure/friction/resistance for 50% of the blade travel. This modification reduces that to 10%. The result is a much smoother and faster opening blade. It actually opens as well if not better than the folders I have. I will be doing the same process on all the new blades for my Wave and Surge.....

This photo does not do it any justice. I spent the better part of a day putting a crazy sharp edge on this thing. I am old-school and prefer to always hand sharpen my blades.....

My friend with a Skeletool came by. I flicked this out. The first words out of his mouth were Holy @!#. I just had to laugh.....*

Hell yeah, now that's what I'm talkin' about! With a nice solid thunk to it when it slams open, it feels like a real solid folder now. It's love all over again.....

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login