The sub-$20 Infinitely variable flashlight
-
Ah okay. Noted.
Never carried it so did not test finish durability...
-
If anyone just wants a pill to play with and they already have a package from me heading their way, ask and I'll include one as a freebie

-
@Neil said:
http://www.edcsource.com/Quantum-Tunnelling-Compound-Five-Pills,name,106873,auction_id,auction_detailsIf anyone just wants a pill to play with and they already have a package from me heading their way, ask and I'll include one as a freebie

That is a... great picture for the auction there, Neil. Really shows the detail.
-
I need to get ahold of a piece of QTC. I gave my wife an E07 for Christmas 2009, and we rarely use it because the light is too freaking bright for most of the stuff you'd use a tiny single AA for.
-
If anyone just wants a pill to play with and they already have a package from me heading their way, ask and I'll include one as a freebie

That is a... great picture for the auction there, Neil. Really shows the detail.
LoL. I think I caught the square blackness of it very well ;)
-
I was just reading the thread on this mod on budgetlight and thinking I should get one to mod. I've had two tank007 703s for over a year now and am happy with their build. I know a lot people used li-ion cells in them with no problem so I to wonder why yours blew out.
Sent via Tapatalk, sorry for the spelling.
-
Well, apparently this light was just having a sulk because it's decided to start working again, sort of. Still good and bright on 14500s and NiZNs, but only mediocre on NiMHs.
-
Well, based on this thread, I decided to get a Tank007. Some of the body is a bit spotty (looks like tiny dimples/dents in some of the aluminum), but the finish work is good. I was also able to take it apart, will try putting a neutral XP-G in there.
It works quite well with the QTC. I have been using some Peak lights with QTC so far, and find this one works a bit more smoothly because of the thread pitch, and brass heatsink (allows for smooth action), and good knurling.
I am finding the QTC gets damaged very quickly in this application though. Will have to experiment. My first piece got torn up in the head. The second piece is getting beaten up in the tail. I hope I can get it to work long term, tis a nice, inexpensive way to get an variable light.
-
What is tearing the QTC in the tail? Is the battery rotating?
I've been amazed how well the pills hold up in the tail of an Eiger.
-
It must be. The QTC in my Eiger has lasted a lot of cycles. I put in a post it note to reduce rotation.
The negative contact is a slot screw, I think maybe that is grinding up the QTC a bit.
The one in the head got chewed up fast, I'll see how long the tail one lasts and adjust appropriately. I think the Peak circuit gives a better low mode, but have not tested this one extensively yet.
-
Yeah, the Eiger circuit with QTC will go almost too low, IMO. I find myself having to look at the emitter end to be sure it's off before I slip it back into my pocket. I think the pills sometimes take a while to expand or "spring" back to shape too, because occasionally I will check the light later and realize it's just turned itself back on.
-
Mike, with the Tank007 and QTC once the flashlight turns on you can actually turn it lower by backing off the pressure a bit. The circuit in the E07 seems to have a bit of initial resistance that needs to be overcome.
I've also found that the best way to keep the QTC from being torn up is use whatever end of the flashlight that doesn't have it as the on/off switch. Since the E07 has twisties in both the head and tail, I found found that putting the QTC in the polarity protection cavity in the head, putting a small amount of craft foam (with a hole cut in it) in the tail section to keep everything in place and using the tail switch to turn it on worked the best.
-
Thanks buddy. Why do you put the foam in the tail? Btw, I modded mine, so have some insight on the led overheating. Will post details later.
-
@gunga said:
Thanks buddy. Why do you put the foam in the tail? Btw, I modded mine, so have some insight on the led overheating. Will post details later.Putting the foam in the tail prevents the battery rattle and keeps the positive terminal in contact with the head, so the QTC doesn't get shifted out of place.
-
I put the qtc in the tail because I use the head switch. It still gets chewed up by the tail. I think perhaps I need to sand the slot a bit? I prefer it in the tail. I do have a sticky foam ring in the head for battery rattle. Tried to put it in the tail but the hole is too small. What kind of craft foam are you using? Closed cell or open? I think I need to get some.
Okay,when disassembling the head, I noticed the circuit and led are mounted on a separate brass unit inside the main brass section. It's pretty cool, but makes for poor heat conduction. I put some thermal compound in between the 2 pills for better heat conduction.
The other thing I noticed is that there was no heatsink compound between the head and the led. This is an issue because it can't be fixed unless you desolder the led, add compound and solder it back. There is a bit of thin clear glue , but not thermal epoxy. I can see these failing if driven hard for too long.
In any case, the design is quite interesting. I have a neutral xpg in mine, so it's a lot warmer and floodier now. You do lose a lot of throw, so keep that in mind.
Overall, a pretty cool light when it has qtc. I just have to get it so it doesn't chew up my qtc!
-
Good tips. I removed the foam ring from the head, found some nice thin closed cell foam and made a ring for the tail to hold (sorta) the QTC. Switching action is a bit smoother now. There is still wear on the QTC from the slot in the negative terminal (brass screw), but it is not dis-integrating like before. I think it should be okay for a little while at least. May have to fill in the slot and provide a smooth surface for QTC longevity in the future.
Cool, variable AA light for cheap. Mods well too. I have dented a battery experimenting. Did it to my peaks too.
:ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



